OSENOUS RD-809 FHD 1080P Video Projector User Manual
- June 16, 2024
- OSENOUS
Table of Contents
OSENOUS RD-809 FHD 1080P Video Projector
PROJECTOR KNPWLEDGE
Important Safeguards
Installation
Please read the user manual carefully before using the projector. To get a better watching, please use this projector while drawing the curtain or in a dark room. Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and abnormal displaying.
Power
Be careful while using the power cord, avoid excessive bending; the damage of power cable may cause electric shock and fire. II is better to unplug the power cord after power off.
Cleaning
Unplug the power cable first. Clean the shell regularly with a damp cloth, neutral detergent can be used. Please use a microfiber cloth or lens paper to clean the lens and avoid scratching it. Please clean projector’s vents and speakers regularly by banister brush, or the ventilation will be blocked.
High Temperature Attention
During projection or immediately after, the nearby exhaust port may become very hot; touching ii could result in burns. While the projector is in use, please avoid looking directly into the lens, as it may cause eye injury.
Warm Tips
Avoid disassembling the projector to prevent electric shock and voiding the
warranty. The product isn’t waterproof. Keep away from liquids, and avoid
placing heavy objects on top of the product. To ensure the stability of heat
dissipation, please open the height bracket in the bottom of the projector
before starting. This projector supports only Mira-cast for screen mirroring.
If you use phones (Google/MOTO/Sony/Samsung) with different protocols like
Chrome-cast, only audio will work. Consider a wired connection or phones
compatible with Mira-cast for screen mirroring. Due to HDCP restrictions,
streaming services like Nelflix or Amazon Prime aren’t supported. Consider
using an Amazon Fire Stick instead. Turn off Dolby sound if experiencing audio
issues due to copyright protection.
Projector Overview
Interface Introduction
The projector can accept high-definition video signals and composite video
signals, and it supports input and output of stereo audio signals. Please
refer to the diagram below to connect the projector to other audio equipment
as needed.
TOP VIEW
BOTTOM VIEW
-
Lens
-
IR Receiver
-
Autofocus signal window
-
Speaker
-
Wired Network Port
-
USB Port
-
HDMI1 Port
-
HDMI2 Port
-
AV Port
-
Headphone Jack
-
IR Receiver
-
Power Socket
-
Cooling Window
(Note: high temperature, please do not touch) -
Removable Dust Cover
-
Power Key
-
Bracket Holes (1/4 Inch) Also Supports Hoisting ,
-
Height Adjustment Machine Feet
-
Bottom Label
Accessories List
Remote Control
- Signal Indicator
- Power Key
- Arrow keys
- Home Key
- Return key
- Volume+
- Volume –
- Source key
- Confirmation key (OK)
- Menu
- Mute Key
- Focus+
- Focus-
- Screen Flip
Multimedia Format Supported
- This model does not support any Dolby audio decoding due to the copyright of the Dolby patent.
Specifications
USE OF THE PROJECTOR
Projector Installation
Precautions Before Use
- When installing the projector on the ceiling or any surface, please ensure It Is properly secured to prevent the projector from falling, as improper installation can result in irreparable damage to both the projector and potential harm to individuals.
- The projector should only be used in an environment where the temperature does not exceed the range of O’C-40’C. Projector malfunction may occur tt this is not adhered to.
- Malfunctions may occur tt the projector is subjected to dusty, wet, moist or smoky conditions.
- Poor ventilation could cause overheating which could lead to damage to the projector as well as a life threatening situation.
Projection Size
Please refer to the following table to adjust your picture size and distance.
(from the lens to the screen).
Please allow t 3% to the image sizes in the table above. If the distance is less than min data and more than max data, the Image could be bluey.
Installation Method
Follow the instructions below for the correct projector positions. Please
contact professional Installers for celling mounting of the projector.
Warning: Please check the diagram below for the trapezoid adjustment.
Turn the Projector Operation On/Off
Before use, please ensure that the cover In front of the projector lens has
been removed. Insert the provided power cord Into the projectors power socket
and power It on. When the projector Is connected to power, It enters standby
mode, and the power key on the body light tums red.
Operation on: Press the power key on the body or the power key on the
remote control, the indicator will tum blue and enter the working state.
Operation off: In the working state, press the power key of the body or
the power key on the remote control, the indicator changes from blue to red,
and the projector is turned off.
Remote Focus Control
Image focusing
When the newly installed projector is used for the first time, the image may
appear blurred, and it is necessary to adjust the focus.
Manual Focus
When the picture is blurred, press the focus keys “F+” and” F- “on the remote
control to adjust the focal length of the lens. Tap or long press the focus
button until the picture is clear. (As shown below).
How to Use Projection Settings
Select the settings icon in the upper right corner of the main interface, and
then press the “OK” key on the remote control to enter the settings interface
and select “Projection Setting”.
Note: As the product system is updated from time to time, the specific
operation content is based on the actual situation.
After entering the interface, select the mode you want in the projection
settings.
Projection mode
Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-Celling. Please select the
appropriate projection mode In the settings menu based on the Installation
position of the projector. Front-Desktop/ Rear-Desktop/ Front-Ceiling/ Rear-
Celling. Please select the appropriate projection mode In the settings menu
based on the Installation position of the projector.
Image Keystone Correction
Manual Keystore
When the projection screen image is not rectangular, ii can be adjusted
using Manual Keystone. Utilize the remote contrors arrow keys to manually
adjust the four comers until the screen alignment is optimal. Access the
settings Interface and choose “Projection Setting’ Locate ‘Manual Keystore
and press the “OK” button to access the adjustment interface.
- OK: Press the “OK” button on the remote control to switch to an alternate adjustment position.
- Employ the directional keys on the remote control for precise image positioning.
- To exit the correction process, press the “Back” button.
- For resetting the calibration, utilize the “Menu” button.
Note: NJ the product eyatem ia updated from tine to time, the specific operation oontent is based on the actual situation.
Automatic Keystore
Enable this function, the correction screen Is automatically performed.
Image Focus
Manual Focus
- Use the remote control arrow keys to manually adjust the picture clarity until the screen is clear.
Note: AB the product system is updated from time to tme, the specific operation content is based on the actual situation.
Automatic Focus
Use the remote control arrow keys to manually adjust the picture clarity
until the screen is clear.
Digital Zoom
Zoom out or enlarge the image.
Note: As the product system Is updated from time to time, the specific operation content Is based on the actual situation.
Correction Settings
- Trapezoidal Correction Reset: Restores the screen to its original proportions.
- AutoKeystone Correction At Power On: It can automatically adjust the square of the screen after booting.
- Power On Auto Focus: It can automatically adjust the picture to be clear after booting.
How to Connect to WiFi
Select the settings icon in the upper right corner of the main interface,
press the “OK” key on the remote control to enter the settings interface, and
select “WiFi Setting”.
Note: As the product system is updated from time to time, the specific operation content is based on the actual situation.
After entering the interface, select the WiFi you want to connect to in the list below, then enter the password and complete the connection. Connected will be displayed behind the successfully connected WIFI.
How to Connect Bluetooth
Select the setting icon in the upper right comer of the main interface, press
the “OK” key on the remote control to enter the setting Interface, and then
select “Bluetooth Setting”.
Note: As the product system is updated from time to time, the specific
operation content is based on the actual situation.
After entering the interface, tum on Bluelooth, search for Bluetooth, and pair
Bluetooth.
How to Change the Language of the Projector
Select the setting Icon In the upper right comer of the main Interface, press
the “OK” key on the remote control to enter the setting interface, and then
select “Other Setting”. Select the language setting to modify.
Note: As the product system ie updated from time to time, the specific operation content is based on the actual situation.
How to Use iOS Cast
Note: The projector needs to be connected to the Internet for using the
iOS Cast or upgrading the projector for the first time.
To use iOS Cast on your projector, follow these steps:
-
Ensure that your iOS device and the projector are connected to the same network.
-
In the main interface, select “iOS Cast”, press the “OK” key on the remote control to enter the interface, and and then set up in the order in the interface.
-
Open the control center of the iOS device and select Screen mirroring.
-
Choose the corresponding projection device name.
Note: As the product system is updated from time to time, the specific operation content is based on the actual situation.
How to Use Miracast
Select “Miracast” on the main interface and press the “OK” button on the remote control to enter the interface. Then, proceed to set up in the order presented within the interface.
Turn on the WIFI of the Android device. (It is recommended that the projector is connected to the same router or the WIFI of the Android device is not connected to any router). Turn on the “Wireless Display” of the Android device. Select the corresponding projector device name.
Android Screen
To connect Android mobile/Pad with Projector Based on WiFi-Display Technology
- On your Android device, turn on WLAN (not necessary to connect to any Wi-Fi router)
- Launch the Multi-screen/ Wireless Display / Screen Mirroring / Smart View function
- Select Please waiting from the searching result list
How to Play Files in USB Disk
Select the required category “movie”, “music”, “photo” or “Office Suite” in
the main interface, and press the “OK” key on the remote control to enter the
corresponding category.
Note: As the product system is updated from time to time, the specific
operation content is based on the actual situation.
Then find the file you want to play in that category, start playing by
pressing “OK” key. (You cannot enter the required category without connecting
a USB disk.
How to Select the Source
Select the source channel you want to enter in the list on the left side of
the main interface, such as HDMI 1 / HDMI 2 / AV, then press the”OK” key on
the remote control to enter the corresponding source interface.
Sile As the product system is updated from time to time, the specific operation content is based on the actual
HELP AND SUPPORT
Troubleshooting
service
If you encounter any problems during use, please feel free to contact us.
Contact information
Email: support@osenous.com
FB: @Osenous Projectors
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator. Inc.
Warning: Do not look directly into the lens!