Buienradar BR900 3-in-1 Weather Station With Wi-Fi App And Wireless Outdoor Sensor User Manual

Buienradar BR900 3-in-1 Weather Station With Wi-Fi App And Wireless

Outdoor Sensor

INTRODUCTION

GENERAL
Please read the user manual of this wi-fi weather station carefully. The BR900 has a wi-fi module and is compatible with the Smart Life and Tuya platform. You can use the app to check the weather data recorded by the indoor and outdoor unit. This manual will help you to familiarize yourself with your new weather station, to learn all of its functions and get advice in case of problems. Following the instructions can prevent damage to your device. We shall not be liable for any damage that occurs as a result of not-following of these instructions. Please keep this instruction manual for future reference.

ATTENTION:

• Please follow the instructions for operation.
• Please use the original or manufacturer specified attachments or accessories.
• Do not disassemble the product, so as to avoid safety hazards.
• Do not place any items on top of the product that may damage the product.
• Do not place the product in a damp place.
• Please terminate use immediately upon damage.
• Do not place the product in places that are exposed to direct sunlight and high temperature such as radiator, electric heater, stove, etc.
• Keep the product away from strong electromagnetic waves, strong static electricity, or moisture and condensation.
• The BR900 is not a toy. Keep the indoor unit, outdoor unit and adapter out of reach of children under 8 years of age.
• Clean your device with a soft damp cloth. Do not use aggressive solvents or scouring agents.

WEATHER STATION

• A1: Time / Calendar / Wi-fi
• A2: Outdoor humidity
• A3: Outdoor temperature
• A4: Weather forecast
• A5: Indoor temperature
• A6: Indoor humidity
• A7: Air pressure
• A8: Moon phase

• B1: “MEM” key (memory key)

• B2: “MODE/SET” key

• B3 ▲/wi-fi key (+ selection key)

• B4: “▼/CH” button (channel 1,2,3) (+ selection button)

• B5: Wi-fi indication light

• B6: Battery compartment
  (2 alkaline 1,5V AA batteries)

• B7: USB cable connection point

• B8: 5V DC adapter socket

• B9: Foldable table top stand

• B10: Hole for wall mounting

WIRELESS REMOTE SENSOR

• C1: Temperature display
• C2: Humidity display
• C3: Transmission signal light. This lights up when the outdoor sensor sends data to the weather station.
• C4: Selection Celcius and Fahrenheit
• C5: TX: transmitting button to send a signal to the weather station in order to (re)link the units.
• C6: Channel selection 1,2,3
• C7: Battery compartment
• C8: Hanging hole for wall mounting

INSTALLATION

WEATHER STATION
Open the battery compartment cover of the weather station and insert 2 alkaline 1,5V AA batteries. Note the correct polarity of the batteries [ “+” and “-” ]. Connect the 5V DC power adapter to power the weather station. The display will light up and all symbols will appear shortly. The weather station will then switch to normal operating mode. The batteries are for the settings if the power supply via the adapter is interrupted unexpectedly.
When the weather station is connected to the power adapter for the first time, the time bar will blink “01 AP” and the wi-fi indicator LED on the side will also blink. (1x per second) The wi-fi (EZ) logon mode is now active. If the weather station does not automatically enter “01 AP” (or “02 AP”, please refer to the manual) mode when turned on for the first time, it can be activated by pressing and holding the button for more than 3 seconds.

NOTE: If the power adapter is disconnected, the wi-fi connection will be automatically lost.

WIRELESS REMOTE SENSOR
Open the battery compartment of the wireless remote sensor and insert preferably 2 lithium batteries 1,5 V AA. In cold environments, lithium batteries are recommended. Ensure correct polarity of the batteries [ “+” and “-” ]. The display will light up. The sensor will display the temperature and humidity within 3 seconds. The outdoor unit transmits information to the indoor unit at regular intervals. This can be seen by the red signal light on the front of the unit lighting up briefly.

IMPORTANT:
Select the same channel for both the weather station and the wireless remote sensor.
Only then can the weather station connect with the remote sensor. A connection will be established with the outdoor unit within 3 minutes. During this link, a blinking RF symbol is visible . If the pairing was successful, the temperature and humidity will appear on the indoor unit display.

For specific logon functions of the weather station and the wireless remote sensor see chapter 2.5 “Pairing weather station and wireless remote sensor”.

USING THE SMART LIFE APP
The BR900 works with the Smart Life or Tuya appfor Android and iOS smartphones.

CAUTION:
The weather station can only connect to a 2.4G wi-fi network.
Enable location information on your mobile phone when adding your weather station to the app.

1. Download Smart Life from the Google Play or Apple App Store.
2. Install the Smart Life app.
3. Follow the instructions to create your own account
4. The home screen will appear once account registration is complete.

Follow the steps below in your app to pair your weather station.

The device will now connect to wi-fi and complete the following steps:

Note:
If the login in the APP is unsuccessful, briefly press the wi-fi button. The unit will now switch to a different login mode (wi-fi AP mode). The wi-fi indicator on the side of the indoor unit now flashes once every 3 seconds. At the same time, “02 AP” appears in the time window.
During the log on procedure in the APP, you will be asked whether the wi-fi indicator light blinks quickly (Blink Quickly) or slowly (Blink Slowly). Select Blink Slowly. Follow the on-screen instructi-ons.

After pairing is complete, the app will automatically synchronise with the weather station.
Your screen will display the measurements and you can tap the icons on the screen to access other icons and functions. Tapping the icon on the bottom left opens a window that shows the curve of the measured temperature and humidity. Tapping the icon on the bottom right opens a window where you can change various settings. Changes are immediately visible on the weather station.

TIME AND DAY INDICATION
The operation buttons on the side of the indoor unit allow you to set different display views. A short press on the MODE/SET button will show the following in sequence: Time / Date / Time with day display

Manuel setting

• Press the button repeatedly once to switch the display to calendar, time/ seconds or time/weekday in the lower left display next to the wi-fi symbol.
• Press and hold the button for 2 seconds, the 12/24 hr display will start flashing. Now use the buttons to select the 12/24 hour mode. Press to confirm.
• The time zone will start flashing, now use the buttons to set the correct time zone (-12 to +12). Press to confirm.
• The hour display starts flashing. Now use the buttons to set the correcthour. Press to confirm.
• The minute display starts flashing. Now use the buttons to set the correct minute. Press to confirm your.
• The month display starts flashing. Now use the buttons to set theMonth/Date or Date/Month. Press to confirm.
• The year indication starts flashing. Now use the buttons to set the correctyear. Press to confirm.
• The month display starts flashing. Now use the buttons to set the correctmonth. Press to confirm your setting.
• The date display starts flashing. Now use the buttons to set the correct date. Press to confirm.
• The language selection for the day starts flashing. Now use the buttons toset a language. There are 7 languages available for the day-indication. Press thebutton to confirm.(EN (English), FR (French), IT (Italian), SP (Spanish), DU (Dutch), DA (Danish), GE (German)
• The selection °C en °F starts flashing. Now use the buttons to set Celcius or Fahrenheit. Press to confirm your setting.
• The air pressure in mb/hPa will start to flash. Use the buttons to set the desired view in mb/hPa or inHg or mmHg. Press the button to confirm.

Note:
If no button is operated within 20 seconds while setting, the weather station will automatically return to the normal display.

PAIRING THE WEATHER STATION AND WIRELESS REMOTE SENSOR

Pairing devices automatically

• Connect the weather station to power supply..
• Select a channel to be displayed on the weather station. Press button to select channel 1, 2 or 3.
• Select the same channel for the wireless remote sensor: open the battery compart- ment to sett the desired channel (1, 2 or 3). The signal light will illuminate regular to indicate that the wireless remote sensor is transmitting signals.
• After connection, the RF signal icon will appear on the indoor unit display of the weather station. This will flash for 3 minutes, indicating that the weather station is in reception mode and waiting for the outdoor wireless sensor to be connect.

Link and read out multiple wireless outdoor sensors
It is possible to register 3 outdoor sensors. If multiple sensors are used simultaneously, repeat the above operations to connect them. Make sure these sensors are activated on different channels.

• Press the weather station button repeatedly to view the readings of each channel. When the symbol appears on the display, the outdoor readings from channel 1 to channel 3 (CH1, CH2, CH3) will automatically appear on the display consecutively.
• To see the temperature and humidity on a fixed channel, press the button until the symbol disappears. Then select the desired channel with the button. Only the readings of the selected channel are now visible.

Manual signal reception
If there is no outdoor information showing on the weather station or there is no change in the temperature and humidity for a long time, there will be a “- – “sign visible on the display. It indicates that the weather station fails to receive signals from the wireless remote sensor, please take the following operations:

• Check and replace the batteries of the outdoor unit if necessary.
• Check whether the indoor and outdoor units are set to the same channel.
• Press and hold the button on the side of the weather station for a few seconds to re-enter the reception mode. A flashing RF antenna symbol will appear next to the channel.
• Press the “TX” button on the wireless outdoor sensor to transmit signals manually. This is indicated by the red light flashing shortly on the front panel.

Note:
When using only one outdoor sensor and the channel of the indoor unit is not set the same as the channel of the outdoor unit, no outdoor values will be displayed.

Outdoor sensor placement:

• Do not place the outdoor sensor in direct sunlight.
• Do NOT place the outdoor sensor in the rain. Possible mounting location: under a roof or porch. Damage caused by rain will not be covered under warranty.

TEMPERATURE AND HUMDITY

TEMPERATURE AND HUMIDITY TREND
The weather station monitors the current temperature and humidity.

MAX/MIN DISPLAY TEMPERATURE AND HUMIDITY
Press the MEM button repeatedly to display the highest and lowest measured values:
To reset the maximum and minimum measured values, press and hold the MEM button for a few seconds.
Note: When the outside temperature reaches a temperature between -1°C to +3°C, the symbol flashes on the display.

WEATHER FORECAST

WEATHER FORECAST EXPLANATION
The weather station calculates the weather forecast based on the history recorded barometric pressure trend. The weather forecast cannot be compared with the professional weather services supported by satellites and high- performance computers. It provides an approximate indication of current developments. Please take the weather forecast from the professional weather station as authoritative.

WEATHER FORECAST SYMBOLS
The weather forecast is shown on the display via graphics and the air pressure trend is shown:

The air pressure is rising
The air pressure is falling
The air pressure remains constant

MOON PHASE

When the date is set correctly, the weather station can display the current moon phase: New Moon, Waxing half moon, Half moon, Waxing full moon, Full moon, Waning full moon, Half moon, Waning half-moon

BACKLIGHT

The brightness of the display can be set as required.
To adjust the brightness of the illumination, press the button.
If the unit is restarted or the power is interrupted, the previous manual settings will be lost. In case of power failure; please insert 2x alkalines 1,5V AA batteries into the weather station to save the settings.
When the power adapter is disconnected from the product, the product will switch to power from the backup batteries. At that time, you can press any key to turn on the backlight for 8 seconds. When using battery power, wi-fi is automatically turned off.

Power consumption:
It is not recommended to power the weather station with batteries only.
For continuous display, please connect the adapter.

SPECIFICATIONS

CONTENTS WI-FI WEATHER STATION WITH APP AND WIRELESS OUTDOOR SENSOR; BR900

• 1x user manual
• 1x weather station
• 1x wireless remote sensor
• 1x 5V DC adapter

WI-FI COMMUNICATIONS SPECIFICATIONS

• Frequency: 2412 – 2472 MHz
• Power: < 20 dBm
• Supporting apps: Tuya Smart / Smart Life
• Supporting platform: Android smartphone / iPhone

WIRELESS OUTDOOR SENSOR

• Dimensions: standing / wall mounted
• Main power supply: preferably 2 lithium batteries 1,5 V AA (not included) (Lithium batteries behave better under cold weatherconditions)
• RF transmission range: 200 m in open area
• RF frequency: 433.92 MHz
• RF power: < 4 dBm
• Transmission interval: 60 seconds for temperature and humidity
• Temperature range: -40°C ~ +70°C
• Humidity range: 20%RH ~ 95%RH

WEATHER STATION

General Specifications

• Dimensions: stand/wall mount
• Main power supply: 5V DC adapter (1.2A)
• Backup battery: 2 x alkalines batteries 1,5V AA (not included)
• Temperature range: -20°C ~ 60°C
• Humidity range: 20%RH~95%RH
• RF frequency: 433Mhz

Time related function specifications

• Time display: UU:MM
• Hour format: 12 hours AM / PM or 24 hours
• Date format: DD / MM or MM / DD
• Day indication language: EN / FR / IT / SP / DU / DA / GE

Air pressure
Pressure unit: hPa, inHg and mmHg
Accuracy: 600 hPa/mb~1100 hPa/mb/17.72 in Hg ~ 32.50 in Hg ± 5hPa

Indoor temperature
Accuracy: 0°C~40°C: ±1°C, 40°C~50°C: ±2°C

Indoor humidity
Accuracy: 40-80%: ±5%, 30-40% & 80-90%: ±8%

Outdoor temperature
Accuracy: -0°C~40°C: ±1°C, -20°C~0°C & 40°C~70°C: ±2°C

Outdoor Humidity
Accuracy: 40-80%: ±5%, 30-40% & 80-90%: ±8%

Remark:
If the temperature or humidity is below the specified values, LL.L will appear.
If the temperature or humidity is above the specified values, HH.H will appear.

MAINTENANCE
Clean the indoor unit with a moist cloth. Never use aggressive or abrasive cleaning products. The outdoor unit may also be wiped down with a moist cloth.

DISPOSAL OF THE DEVICE (ENVIRONMENT)
This product may not be discarded as normal household waste at the end of its life span, you must bring it to a collection point for the recycling of electric and electronic devices. Don’t throw away exhausted batteries, but bring them to your local depot for Small Chemical Waste (SCW).

DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the Buienradar © weather station BR900 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://DOC.hesdo.com/BR900-DOC.pdf
EN 301 489-3
EN 300 220-2
EN 50371
EN 60950

WARRANTY TERMS AND CONDITIONS

For the Buienradar © weather station BR900 you have a warranty of 24 months from the date of purchase. During this period, we guarantee the free repair of defects caused by material and workmanship errors.
All this subjected to the final assessment of the importer.

HOW TO HANDLE
If you notice any defect, first refer to the user’s manual. If the manual provides no definite answer, please contact the supplier of this weather station.
In the event of a defect, you may return the weather station with a clear description of your complaint or a dated purchase receipt to your supplier who will ensure a quick repair or otherwise send the product to the importer.

THE WARRANTY BECOMES NULL AND VOID
In the event of improper use, incorrect connection, use of non-original parts or accessories, neglect or negligence during maintenance, defects caused by fire, flooding, lightning strikes and natural disasters and in the event of breakage due to falling or improper use. In the event of unauthorised modifications and/or repairs by third parties. In the event of improper transport of the device without suitable packaging and if the device is not accompanied by this warranty card or the purchase receipt. Connection cables and plugs are not covered by the guarantee.

Any further liability, in particular for any consequential damage, is excluded.

Commaxx B.V., Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands
support@commaxxgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>