Gelgey F6 Smart Door Lock with Handle User Manual

Gelgey F6 Smart Door Lock with Handle User Manual

Letter of thanks to clients

Dear Valued Client,
We would like to express our sincere gratitude for choosing Gelgey as your smart lock provider.
Our mission is to create a safe, simple, and smart life for our customers worldwide. As a company with an in-house manufacturing facility, we take immense pride in crafting dependable and secure smart locks that undergo rigorous testing and quality assurance by our dedicated team.
We are grateful for the trust and support of our customers, and we promise to continuously improve our products by incorporating the latest technology and listening to your suggestion.
if you have any issues such as installation or suggestions about the product, please do not hesitate to contact us at any time.

We wish you all the best and kindly ask for your continued support of Gelgey in the future. Once again, thank you for your patronage.
Warm Regards,
The Gelgey Team

PRODUCT DETAILS

Package Included
Latch

Exterior lock

Interior lock

Latch Cover

Strike Plate

IC Card

Strut

Screw

User Manual

Steel Pin

Spindle

key

Product Overview

Specifications

INSTALL REQUIREMENTS

Identify Left/Right Hand Door Stand by OUTSIDE facing the keypad

Check Door Measurements

INSTALL PREPARATION

Adjust the Latch
A Measuring if the latch is long enough, pull it to adjust from 60mm to 70mm.

B If the ‘square’ latch hole is centered in the door hole, no need to adjust.

C If not, adjust it until it is centered

Adjust the Handle Direction of the Exterior Lock Note : Please ensure the door handle is in the upward position before adjusting the shift piece!

A Keep the handle lifting and lift up the shift piece
B Turn the handle to the direction that you need
C After turning the handle, lift the handle and keep then flatten the shift piece. Adjust the Handle Direction of the Interior Lock Note : Please ensure the door handle is in the upward position before adjusting the shift piece!

A Keep the handle lifting and lift up the shift piece
B Turn the handle to the direction that you need
D Lift the handle a little bit after handle turning
E Keep the handle lifting and flat the shift piece after turn the handle

INSTALL THE LOCK

Install the Latch and Strike Plate

NOTE : Please first identify the closing direction of the door and make sure the slope of the latch and the door closing direction are in the same direction.

Install the Exterior Lock
A Insert the spindle to the clutch, then make the steel pin through the clutch hole and spindle hole

B Make sure the steel pin through the spindle hole and clutch hole, then bend the tail of steel pin.

Note : You also can install the “Strut” selectively. Fix the strut on the backside of the exterior lock.

C Insert the spindle and keep it horizontal

D The IC wire needs to pass under the latch.

Note: After installing the exterior lock, if you turn the handle and the lock latch doesn’t retract, it’s normal.

Install the Interior Lock
A Connect the IC wire with the interior Lock, fix the interior lock onto the door **.

B Rotate the handle to make sure the screw can fix the interior lock stable. (Take care of the handle when fixing the screw to avoid scraping the handle)

Note** : After installing the interior lock, turning its handle will retract the lock latch as expected.

Installing the battery

Test

A Press the handle of the back panel to see whether the latch can retract normally.
B Before the administrator password is set(in reset mode), any password / fingerprint / IC card can unlock.
C Enter 6-10 digits end with # to unlock, it will auto-lock within 5s.

FUNCTION INTRODUCTION

DOORBELL FUNCTION

Press the location of 【#】when the keypad is turn off, you will hear “Ding Dong” from the lock.

Anti-Lock Function

Press 4 Reset Factory Setting

Solution 1: press【 】【#】【admin code/fingerprint/IC card】【#】【4】
【admin code/fingerprint/IC card】【#】
Solution 2 : press the reset button on the interior lock for 5s, then release the reset button, press 【#】to confirm the setting.

Note :
All the administrator users and normal users have been deleted after reset to factory setting, and administrator users password will be set back to 123456.

OPERATION GUIDE

Note

A The on the keypad can be used to return to the previous menu, clear the input content, and exit the system/menu.
B The【#】on the keypad is used to operate all entered confirmation keys and doorbell functions.
C Wake up the keypad and enter 【#】to enter the menu. (After having the administrator password, you need to enter the【 】【# 】
【administrator password】【 #】 to enter the menu.)
D For the first time setting or restoring factory settings, the administrator password is 【123456】.

Press 【#】【administrator password 】【#】 to enter the menu

Press ❶ administrator setting (3 ways to register administrator)

Press ❶ Add Administrator User(Password/Fingerprint/RFID Card)

Press ❷ Delete Administrator User

Add Password : enter {new password}+#, repeat {new password} + #

Add Fingerprin t: contact administrator fingerprint 5 times on the fingerprint sensor

Add RFID Card : contact administrator RFID card

Then set other 9 administrator passwords, include fingerprints and RFID cards.

Input {administrator’s ID} + #

Press ❷ Normal User Setting

Press ❶ Add Normal User

Press ❷ Delete Normal User

Enter {new password/fingerprit/IC}+#, repeat {new password/fingerprit/IC} + #

❶ Input {normal ID} + #

❷ Delete all ID + #

Press ❸ System Setting

Press ❶ Time Setting

Press ❷ lock ID SETTING

Press ❸ sounds setting

Press❹ lock open mode

Input the year/ month/ day/ hour/ minute according to the voice prompt, and press the # key to confirm. (e.g. 2023/ 06/ 06/ 06/ 30)

Please follow the voice prompts.

Press ❹ low down the sound + #

Press ❻ increase the sound + #

Press ❶ single mode

Press ❷ combination mode

Press ❸ lock add duration(2-9s can be set)

Double Verification Mode (After starting the mode, the user needs to verify two user code (password or
fingerprint or IC card) to unlock successfully

Press ❷ to increase opening duration

Press ❽ to low down opening duration

DETAILED OPERATION STEPS

Note:

1. The default admin password is: 123456
2. Warm Reminder: For your home safety, please be sure to register as an administrator first! (There are three set administrator ways: Digital Password/ Fingerprint/ IC Card)

Set administrator

Set Administrator -Password

Set Administrator -IC Card

Set Administrator -Fingerprint

Note:

1. A total of 10 administrators can be added (001-010)
2. After the administrator is successfully added for the first time when adding another administrator, you can enter any administrator password you set.

Delete Administrator

Note:

1. Delete Administrator by Administrator ID
2. Administrator’s ID = 001~010
   
   Add Normal User
   Add Normal User–Password
   

Add Normal User -IC Card

Add Normal User–Fingerprint

Note:

1. A total of 240 normal users can be added (011-250)
2. Normal users can add 100 digital passwords, 100 IC cards, and 40 fingerprints.

Delete Normal User

Note:

1. Delete Normal User by user ID
2. Normal User ID = 011~250

Delete Normal User–Single

Delete Normal User–All

Sounds Setting

Raising the sound

Lowering the sound

Lock open Mode Setting

Single Unlocking Mode

Combination Unlocking Mode

Opening Duration Setting (2-9S can be set, default 5s)

Increase Opening Duration

Reduce Opening Duration

Passage Mode Setting

Note:

1. The Lock will keep unlocking in passage mode
2. Disable Passage Mode : Lock with any administrator users

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>