SUNCO LED Parking Lot Light Instruction Manual
- June 16, 2024
- SUNCO
Table of Contents
SUNCO LED Parking Lot Light Instruction Manual
COMPONENTS
-
Adjustable Slip Fitter (AM
-
Adjustable Slip Fitter (AM
IMPORTANT SAFETY INSTRUCTIONS
- Please review instructions carefully before proceeding.
- Risk of fire. Consult a qualified electrician to ensure correct branch conductor.
EASY INSTALLATION
- Turn off circuit breaker before installation.
Note: To adjust wattage, remove 0.75” plug from location shown in image.
* Once desired wattage is reached, re-insert plug.
* Tighten until secure. -
Loosen all 4 Allen Screws until bracket can easily slide onto light pole.
-
Connect to fixture wires to supply wires using wire nuts:
- a. Black to Black (Live)
- b. White to White (Neutral)
- c. Ground to Ground
Note: If using dimming function, connect dimming wires:
* a. Dim+ (Pink)/DC+
* b. Dim- (Purple)/DC - Secure Allen Screws until fixture does not rotate or slide.
Note: If desired, you may adjust fixture until preferred orientation is achieved (0-90°).
- Turn on circuit breaker and test light.
WARNING
To reduce the risk of fire, electric shock, or physical injury:
- Turn of circuit breaker before installing this fixture.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and hazards involved.
- Min. 75°C supply conductors.
- Abide by related regional and local laws or regulations.
- Proper grounding is required to ensure safety.
- Do not cover the fixture with thermally insulating material.
- Check for shipping damage before installing. If the product is damaged, do not use it.
- Keep fixture away from corrosive substances.
- This fixture is wet rated. Suitable for outdoor environments ranging from -31°F-122°F (without motion sensor), -22°F-122°F (with motion sensor).
- Clean the fixture regularly to ensure proper operation. Do not clean with harsh solvents.
- Use safety precautions and abide by regional and local laws or regulations.
- This product is not compatible with timing devices.
- This product is not compatible with third party photo sensors.
- This product is not compatible with third party sensors.
- This product is not compatible with occupancy sensors.
SPECIFICATIONS
Voltage: 120V-277V
Wattage: 150W
Moisture Rating: Wet Rated
Housing Material: Aluminum
Weight: 7.2 lbs
Warranty: 7 years
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>