ELCO Lighting EL518ICA 5 Inch Sloped Ceiling IC Airtight New Construction Housing User Manual
- June 4, 2024
- ELCO Lighting
Table of Contents
EL518ICA 5 Inch Sloped Ceiling IC Airtight New Construction Housing
User Manual
EL518ICA 5 Inch Sloped Ceiling IC Airtight New Construction Housing
ELCO Slant allows for installation in sloped ceilings ranging from 2/12 (10°) to 6/12 (26.5°). Can be used in insulated ceilings. Fits in 2″ x 8″ joist construction.
Features
- Airtight Slope IC New Construction Housing.
- Single-wall aluminum construction for use in insulated ceilings.
- Designed for use in 2/12 to 6/12 sloped ceilings.
- Thermal Protector guards against improper lamping.
- Lamps: Medium Base Incandescent, CFL, or LED.
- UL is Listed for damp location and for feed through.
Specifications
| Wattage | 75W |
|---|---|
| Voltage | 120V |
| Lamp Type | Medium Base (E26) |
| Wet Location | Listed with Wet Location Trim |
| Damp Location | Listed |
Technical Details
Construction :
- IC Rated for Direct Contact with Insulation.
- Designed for use in 2/12 to 6/12 sloped ceilings.
- Housing adjusts in the frame to accommodate up to 1 1/4” ceiling thickness.
- Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2×8 joists or taller
ones are used. High-strength hanger bars can easily be nailed to joists. A
template for hole cutout is provided with each housing. Suitable for T-grid
and drop ceiling applications. See the installation sheet for detailed
information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2”
trade-size conduit knockouts and four pry-out knockout slots for easy Romex
installation.
Hanger Bars: Pre-installed hanger bars with True Nail are easy
installation in regular lumber, engineered lumber, and Laminated Beams.
Integral T-bar slots for easy installation in T-Bars. Spans up to 24″ and can
be repositioned 90°. Score lines allow for tool-free hanger bar size
reduction. Integral leveling flange allows for single-person installation while
aligning the housings with the joists.
Electrical:
- Rated for 120V or 277V input.
- For 277V step down to 120V housing consult factory.
Trims: Compatible with ELCO 5″ Line Voltage Slope PAR trims.
Lamp: Designed for use with Medium Base (E26) PAR lamps up to 75W.
Listings:
- UL is Listed for a Damp Location.
- UL is Listed for Direct Contact with Insulation and Combustible Material.
- UL is Listed for Feed Through.
- AirTight: Per ASTM E-283.
Dimensions
Product Number
| Item | Lamp type | Watts | Voltage |
|---|---|---|---|
| EL518ICA | Medium Base (E26) | 75W | 120V |
Project name:………………
Fixture type:……………………..
Date:………………………………………….
2042 E. Vernon Ave., Vernon, CA 90058
Tel 323-231-2600
Fax 323-231-3200
elcolighting.com
© ELCO Lighting 2022. All rights reserved
Rev. 25 Aug 2021
ELCO Lighting reserves the right to make specification and design changes
without notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>