Fenix LR60R Handheld Flashlight User Manual
- June 16, 2024
- FENIX
Table of Contents
LR60R Handheld Flashlight
User Manual
Fenix LR60R Handheld Flashlight
21000 LUMENS MAX OUTPUT
1085 METERS MAX BEAM DISTANCE WARNING
- DO place this flashlight out of the reach of children!
- Do NOT shine the flashlight directly into the eyes of anyone!
- Do NOT place light head near flammable objects, high temperatures can cause objects to overheat and become flammable/ignite!
- Do NOT use the flashlight in inappropriate ways, doing so could cause serious personal injury or death if the flashlight or internal battery fails!
- his flashlight will accumulate a significant amount of heat while operating, resulting in a high temperature of the flashlight shell. Pay close attention to avoid burns.
- If the light will not be used for an extended period, turn off the light to prevent accidental activation during storage or transportation.
- The LED of this flashlight is not replaceable; so the whole flashlight will need to be replaced when the LED reaches the end of its lifespan.
Fenix LR60R Flashlight
- 21000 lumens maximum output and 1085 meters max beam distance.
- Uses one Luminus SFT70 LED and twelve Luminus SST40 LEDs.
- Mechanical rotary switch for rapid brightness and mode selection.
- OLED smart display shows brightness level, remaining runtime, and remaining battery level.
- Search mode and Camp mode provide for various lighting demands. The Search mode could be used for long range searching while the Camp mode is great for large area illumination.
- Powered by a replaceable battery pack that consists of 4 x 4000mAh batteries.
- The detachable metal handle, the included shoulder strap, and the threaded tripod socket assist light placement needs required in various scenarios,
- USB Type-C fast charging/discharging port and USB-A discharging port.
- Size: 8.19″ x 3.58″ x 2.46°/208 x 91 x 62.5 mm.
- Weight: 52.91 02/1500 g (including battery).
OPERATING INSTRUCTIONS
On off
With the flashlight switched off, rotate the mechanical rotary switch to any
output to turn on the flashlight.
With the flashlight switched on, rotate the mechanical rotary switch to ‘(
** ’ to turn off the flashlight.
Mode Switching
With the light switched off, rotate the mechanical rotary switch clockwise to
turn on the light and enter the Search mode.
With the light switched off, rotate the mechanical rotary switch
counterclockwise to turn on the light and enter the Camp mode.
Output Selection**
With the light switched off, rotate the mechanical rotary switch clockwise to
enter the Search mode and select Eco—Low—Med—High—Turbo. ith the light
switched off, rotate the mechanical rotary switch
TECHNICAL PARAMETERS
ANSI/PLATO FL1| SEARCH MODE(LONG RANGE SEARCHING)| CAMP
MODE(LARGE AREA LIGHTING)
---|---|---
TURBO| HIGH| MED| LOW| ECO| MED| HIGH|
TURBO| SOS| STROBE
SPOT-AND FLOODLIGHT| SPOTLIGHT| FLOODLIGHT| SPOTLIGHT|
SPOT-AND
FLOODLIGHT
OUTPUT| 21000 lumens| 3000 lumens| 1000lumens| 300 lumens| 50 lumens| 2000
lumens| 6000 lumens| 15000 lumens| 300 lumens| 9000 lumens
RUNTIME| 1 hour 50 minutes| 3 hours 45 minutes| 10 hours 40 minutes| 24
hours 20 minutes| 113 hours| 5 hours
25 minutes| 3 hours| 2 hours
10 minutes| /| /
DISTANCE| 1085 meters| 1000 meters| 607
meters| 330 meters| 132
meters| 126
meters| 218
meters| 352
meters| /| /
INTENSITY| 294267 candela| 249717 candela| 92184 candela| 27123 candela| 4371
candela| 3949
candela| 11839
candela| 30896
candela| /| /
IMPACT RESISTANCE| | 1 meter
`SUBMERSIBLE| | IP68
Note: According to the ANSI/PLATO FL1 standard, the above specifications
are from the results produced by Fenix through its laboratory testing using
the battery pack that consists of 4 x 4000mAh batteries, under the temperature
of 2143°C and humidity of 50% – 80%. The true performance of this product may
vary according to different working environments. *The Turbo output is
measured in total of runtime including output at reduced levels due to the
buit-in temperature protection mechanism.
counterclockwise to enter the Camp mode and select Med—High—
Turbo—SOS-—Strobe.
INTELLIGENT BRIGHTNESS DOWNSHIFTING SENSOR
On/off
With the light switched off, switch the mechanical rotary switch in the order
of Off-Eco—Off 3 times within 3 seconds. The OLED display will show “ON”, and
the light will blink twice in Eco mode, indicating that thesensor function is
enabled.
With the light switched off, switch the mechanical rotary switch in the order
of Off-Eco—Off 3 times within 3 seconds. The OLED display will show “OFF”, and
the light will blink eight times in Eco mode, indicating that the sensor
function is disabled.
Intelligent downshift
When the light head is close to an illuminated object (about 2.36″/60 mm) for
more than 1 second, the flashlight will automatically downshift thebrightness
level to Eco output to avoid potential danger/burns danger caused by high
temperature. When the light head is away from the illuminated object for more
than 1.2 seconds, the flashlight automatically recalls the previously used
output level.
CHARGING
- With the light switched off, open the anti-dust cap and plug the USB Type-C socket of the charging cable into the light, then connect the USB-A end of the charging cable to a charging adapter and plug it into an electric outlet.
- When charging, the OLED display will automatically light up to show the battery level and charging status. The normal charging time is approximately 1.5 hours from depletion to fully charged with a 45 W or higher-power charging adapter.
- Do not charge the flashlight if there is no battery pack inserted.
POWER BANK FUNCTION
- With the light switched off, open the anti-dust cover and plug the USB-A or USB-C socket of the charging cable into the flashlight, thenconnect the other socket of the charging cable to the digital device.
- When discharging, the OLED display will automatically light up to show the battery level and discharging status. |
- Be sure to unplug the cable and close the anti-dust cover once discharging is completed.
Note:
- Only Eco mode can be operated when charging.
- All modes can be operated when discharging and the flashlight will downshift to a lower brightness level based on the actual battery level. If the battery level is too low, the light will automatically stop discharging.
OLED SMART DISPLAY
Turn on the flashlight, the OLED display will automatically light up and show
the brightness level, remaining runtime, and remaining battery level. The OLED
display will stay on constantly regardless of hgnt output. The displayed
brightness level is the preset brightness level. The actual brightness level
will reduce due to the intelligent heat protection.
Note:
- If the battery level is lower than 10%, the battery icon in the lower-left corner of the display will flash to remind you to replace or recharge the battery pack.
- If the battery level is lower than 5%, the low-battery image will appear and flash to indicate the flashlight is extremely low on power. The flashlight will automatically downshift the brightness level to Eco output. The SOS output will flash at the Eco output brightness level only at this battery level.
INTELLIGENT OVERHEAT PROTECTION
The flashlight will accumulate a lot of heat when used at high output levels
for extended periods. When the light reaches a temperature of 60°C/140°F or
above, the light will automatically step down a few lumens to reduce the
temperature. When the temperature drops below 60°C/140°F, the light will
gradually recall the preset output level.
LOW-VOLTAGE WARNING
When the battery pack voltage level drops below the preset level, the
flashlight is programmed to downshift to a lower brightness level until Eco
output is reached. When this happens in Eco output, the battery icon in the
OLED display flashes to remind you to replace or recharge the battery pack. To
ensure normal use, the flashlight will not turn off automatically and will
work till the battery level runs out completely.
USAGE AND MAINTENANCE
Disassembling the sealed head can cause damage to the light and will void the
warranty.
“olf the light will not be used for an extended period, turn off the light to
prevent accidental activation during storage or transportation.
“Long-term use can result in O-ring wear. To maintain a proper water seal,
replace the ring with an approved spare.
“Periodic cleaning of the battery pack contacts improves the lamp‘s
performance as dirty contacts may cause the lamp to flicker, shine
intermittently or even fail to illuminate for the following reasons:
A: Poor battery level.
Solution: Replace or recharge the battery pack.
B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing
alcohol.
If the above methods don’t work, please contact your authorized distributor.
INCLUDED
Fenix LR6OR flashlight, ARB-L56-4000 battery pack. Lanyard, USB Type-C
charging cable, Hanging ring screw, Shoulder strap, Spare O-ring, User manual,
Warranty card
LIGHTING FOR EXTREMES
[
https://www.facebook.com/fenixproducts/**](https://www.facebook.com/fenixproducts/)
[
http://weixin.qq.com/r/EUSfh5zE7MGTrdjk9xED**](http://weixin.qq.com/r/EUSfh5zE7MGTrdjk9xED)
“Follow” us for more information about Fenix.
Tel: +86-755-29631163/83/93 Fax: +86-755-29631181
E-mail: info@fenixlight.com
Web: www.fenixlight.com
Address: 2F/3F, West of Building A, Xinghong Technology
Park, 111 Shuiku Road, Fenghuanggang Community,
Xixiang Street, Bao’an District, Shenzhen City, Guangdong
Province, China61.149.221.095-A3-20231115
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>