JuniPer Cloud-Ready SSR1500 Network Receiver User Manual

: June 16, 2024
: JUNIPer

Table of Contents

Cloud-Ready SSR1500
General Information
Learn with Videos
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JUNIPER NETWORKS Cloud-Ready SSR1500 Network Receiver User Manual

Cloud-Ready SSR1500

IN THIS GUIDE

Step 1: Begin | 1
Step 2: Up and Running | 5
Step 3: Keep Going | 8

Begin

IN THIS SECTION

Meet the Cloud-Ready SSR1500 | 2
Claim Your Appliance | 2

In this guide, we provide a simple, three-step path, to quickly get the Juniper Networks® SSR1500 appliance up and running on Juniper Mist™ cloud. You can on-board a single device using your mobile phone, or one or more devices using your computer. Once on-board, we’ll walk you through the steps to create a basic configuration You’ll need your Juniper Mist WAN Assurance subscrbrঞon and your login cr;7;nঞ-Ѵs for the Juniper Mist portal.

NOTE: Before you begin, you must set up your or]-nbz-ঞon and sites, and -and activate your subscriptions. For more information see Quick Start: Mist.

Meet the Cloud-Ready SSR1500

The SSR1500 is a 1 U fixed configuration appliance that’s ideal for for extra large data center or campus deployments. Powered by the Juniper Session Smart Router (SSR) software, the SSR1500 provides secure and resilient WAN connectivity.

The SSR1500 has four 1 GbE ports, twelve 1/10/25 GbE SFP28 ports, a management port (for Mist operations), 512 GB of memory, and a 1 TB enterprise-grade solid-state drive (SSD) for storage.
Cloud Ready

Claim Your Appliance

IN THIS SECTION

Mist AI App QR Scan | 3
Enter the Mist Claim Code | 3

The SSR1500 comes ready to manage using the Juniper Mist Cloud portal.

To add the SSR1500 to your organization’s WAN Edge inventory, you must enter the SSR1500 claim information into Mist. The claim code label (QR code sticker) on the front panel has the claim information.

To enter the claim information, do one of the following:

Scan the QR code with the Mist Al mobile application. See “Mist Al App QR Scan” on page 3.
Manually enter the claim code in Mist. The claim code is the number above the QR code. For example: In this picture, the claim code is FVDHMB5NGFEVY40. See “Enter the Mist Claim Code” on page 3.

Mist AI App QR Scan

You can download the Mist Al App from the Mac App Store or from Google Play Store.

Open the Mist Al app and log in using your account credentials. If you do not have an account, see Create a Mist Account and Organization.
Select your organization.
Tap Clalm Devices to Org
Scan the QR code. The app automatically claims the device and adds it into your organization’s inventory.
On the Organization screen, tap Device Inventory Routers Unassigned. Review the MAC address.

Onboarding Complete!

Fantastic, the SSR1500 is in your inventory! To provision the SSR1500, see “Step 2: Up and Running” on page 5.

Enter the Mist Claim Code

Claiming multiple devices-When you purchase multiple devices, we provide you with an activation code along with your PO information. Make a note of this code.

Claiming a single device-Locate the QR code on your device and make a note of the alphanumeric claim code directly above it.

Open the Juniper Mist” Cloud portal and log in to your account. If you do not have an account, see Create a Mist Account and Organization.
Select Organization > Inventory from the menu on the left, then select the WAN Edges tab at the top.
Click Claim WAN Edges in the upper right portion of the inventory screen.
Enter the SSR1500 Activation code or claim code and click Add.
Clear the Assign claimed WAN Edges to site check box to place the SSR1500 in the inventory. The SSR1500 is assigned to a site later, see “Assign the SSR1500 to a Site” on page 6.
Click the Claim button to claim the SSR1500 into your inventory.

Video: Add the Claim Information in Mist

Onboarding Complete!

Fantastic, the SSR1500 is in your inventory! To provision the SSR1500, see “Step 2: Up and Running” on page 5.

Up and Running

SUMMARY

The SSR1500 is onboarded to the Juniper Mist™ Cloud. To provision the SSR1500 with ZTP, log in to your Mist portal and begin the WAN configuration. Configuring your SSR device is made simple through the use of the SSR WAN Edge Templates.

IN THIS SECTION

Create a WAN Edge Template | 5
Assign the Template to a Site | 6
Assign the SSR1500 to a Site | 6
Install the SSR1500 in a Rack | 7
Connect Your SSR1500 to the Mist Cloud | 7

Create a WAN Edge Template

IN THIS SECTION

Create a Template | 5

The WAN Edge Templates provide you with the basic network configuration in a single step, and allow for re-usable and consistent configuration for every SSR device you deploy. The template provides device specific, preconfigured WAN interfaces, LAN interfaces, a traffic steering policy, and an application policy.

Create a Template

To create a Template:

Select Organization > WAN Edge Templates from the menu on the left.
Click Create Template in the upper-right corner of the WAN Edge Templates page.
Enter a name for the template.
Select Create from Device Model.
Select your SSR device from the Model drop down.
Click Create Your SSR device template is displayed.
Scroll down through the template to see the preconfigured WAN interfaces, LAN interfaces, TRAFFIC STEERING, and APPLICATION POLICIES.

Video: Create a Template

Great job! You now have a working WAN Edge template you can apply to many sites and devices across your organization.

Assign the Template to a Site

Now that you have set up the template, you need to assign it to the site where your SSR device will be deployed.

Click the Assign to Site button, and select the site to which you want to apply the template configuration.
Click Apply. Great work! All that remains is to associate the SSR1500 with a site. Assign the SSR1500 to a Site

After the SSR1500 is onboarded to the Mist cloud, you’ll need to assign it to a site so you can begin to manage the configuration and gather data in Mist cloud.

Select Organization > Inventory. The status of the SSR1500 is shown as Unassigned.
Select the SSR1500 and from the More drop-down list, select Assign to Site.
Select the site from the Site list.
NOTE : Under Manage Configuration, do not check the Manage Configuration with Mist checkbox for the SSR1500 if it is using Session Smart Router software version 5.4.4. This allows the SSR1500 to reach out to the conductor IP address specified when the site was created to receive configuration information.
If you are onboarding a Mist-managed appliance using Session Smart Router software version 6.0, select Manage Configuration with Mist. If you do not select Manage Configuration with Mist, the SSR1500 will not be managed by Mist.
Click Assign to Site.

Video: Assign the SSR1500 to a Site

The site assignment takes a few minutes. After the site is fully onboarded, use the Mist WAN Edge – Device View to access the SSR1500, and the Insights view to view events and activity.

Install the SSR1500 in a Rack

Install the SSR1500 in a rack and connect it to power. For instructions see the hardware guide on the Juniper Mist Supported Hardware page.

Connect Your SSR1500 to the Mist Cloud

Your SSR1500, uses port labelled MGMT (mgmt-0/0/0) as the default port to contact Mist for zero-touch provisioning (ZTP). It uses port 2/1 (xe-0/2/1) to connect to the LAN.

Connect the MGMT port to an Ethernet link that can assign a DHCP address to the SSR1500 and provide connectivity to the Internet and Mist.
NOTE: For management, you can connect the SSR1500 to Mist using the MGMT port. You can also connect to Mist from one of the WAN ports only when the MGMT port is disconnected, or does not have a valid DHCP leased address and default route.
Do not change the Mist management port once your appliance is powered on and connected to the Mist Cloud instance.
Connect port 2/1 to your LAN devices, such as
- Mist-managed Juniper EX switches
- Mist APs
- User devices
Power on the SSR1500.

Great job! Your SSR1500 is now connected to the Mist cloud! In just a few minutes, Mist will send the template-driven configuration down to your device. Once the configuration has been applied, it will begin forwarding sessions from LAN to WAN as described by your policy.

Go to the WAN Edges menu on the Mist sidebar, select your device, and watch events as the device completes ZTP.

As your client devices connected to the LAN are assigned addresses from the WAN Edge DHCP server and begin sending sessions, telemetry will populate the insights page, and Marvis will start analyzing it on your behalf

Keep Going

SUMMARY

Congratulations! Now that you’ve done the initial configuration, your SSR1500 is ready to use. Here are some things you can do next:

IN THIS SECTION

What’s Next? | 8
General Information | 8
Learn with Videos | 9

What’s Next?

If you want to	Then
Understand the various configurations available on theSSR1500	See

Configuration Management on the SSR
Configure essential user access and authentication features| See Access Management
Upgrade the software| See Upgrading the SSR Networking Platform

General Information

If you want to	Then
See all documentation available for the SSR1500	See the SSR1500 Documentation

in the Juniper Networks TechLibrary
See all documentation available for SSR software| Visit Session Smart Router (formerly 1281)
Stay up-to-date with new and changed features and known and resolved issues| See the SSR Release Notes

Learn with Videos

Here are some great video and training resources that will help you expand your knowledge of SSR “Softwer

If you want to	Then

Get short and concise tips and instructions that provide quick answers, clarity, and insight into specific features and functions of Juniper technologies| See Learning with Videos on Juniper Networks main YouTubepage
View a list of the many free technical trainings we offer at Juniper| Visit the Getting Started page on the Juniper Learning Portal

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Copyright
© 2023 Juniper Networks, Inc. All rights reserved.