YENKEE 08BT True Wireless Noise Cancelling Earphones User Manual

YENKEE 08BT True Wireless Noise Cancelling Earphones

Overview

1. Multifunction touch sensor
2. LED indicator
3. Microphone
4. Charging port
5. Charging contacts
   

App

| |
---|---|---
|

Putting Into Operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
Before first use, please charge the BT earphones to a maximum level.
The earphones are automatically ready to use after removing from the charging box.
Caution : To prevent damage to your hearing, before connecting the BT earphones to your mobile phone, make sure that your device’s volume level is always set to minimum.
Note : The BT earphones will turn off after a longer period of inactivity unless they are paired to another device.

Pairing Your Headphones Via Bluetooth

Open charging box cover and wait until earphones pair with each other. In the available Bluetooth devices on the mobile phone or other devices, you want to pair the earphones with, find .. HARMON” and start the pairing process.
If one earphone doesn’t work, proceed as follows:
Step 1 : Turn off Bluetooth on your phone
Step 2 : Put both earphones back in the charging case and close the lid.
Step 3 : Open the lid and take out both earphones, place them on the table, and wait 75 seconds for them to automatically pair with each other. In case you don’t see .. HARMON” in available devices, check if bluetooth is turned ON in your device [restart bluetooth in case of future invisibility].
Note : To ensure a stable bluetooth connection, make sure that the distance between the BT earphones and your paired device is kept within 10 meters. Depending on the surrounding interference, it is sometimes necessary to keep a shorter distance between the BT earphones and your paired device
Note : If you are requested to enter a pairing code while your device and the BT earphones are pairing, use the following code: “0000”.

HOW TO CONNECT TD THE APP

1. Obtain the Tuya Smart app by scanning the OR code from this user manual with your phone.
2. Launch the app, register for a new account, or log in with your existing one.
3. Create a password and proceed to the ,,Add device” section.
4. Enable Bluetooth and devices within range will be detected based on signal strength.
5. Press the,,+” button and choose ,,add device”.
6. Wait for the ,,connection” process to complete.
7. Upon successfully adding the device, the word ,,completed” will appear on the screen.
8. Congratulations! Your device is now fully connected.
   For more detailed instructions visit www.yenkee.eu

Operation Of The BT Earphones

Turning the BT earphones ON : Hold down the multifunction touch button on both earphones for 3 seconds. By opening charging case earphones will automatically connect with last used device. Simply place them in ears and double tap to play your playlist.
Turning the BT earphones OFF : Hold down the multifunction touch button on both earphones for 6 seconds. Inserting the BT earphones in the charging box will disconnect them from the bluetooth transmission, turn them off and start their charging automatically.
Answering/ending a phone call : To answer/end an incoming call tap the multifunction touch button on any earphone.
Rejecting an incoming call : To reject an incoming call to a paired mobile device, hold down the multifunction touch button on the any earphone for 2 seconds until the call is rejected.
To start/pause the music playback : To start/pause the music playback from your connected mobile device, tap the multifunction touch button on any earphone shortly.
Previous/next track : For previous track hold the multifunction touch button on the left earphone for 2 seconds. For next track hold the multifunction touch button on the right earphone for 2 seconds.
Voice assistant : To enable this feature on your paired mobile device, 2x tap the multifunction touch button on right earphone shortly.
The voice assistant feature availability depends on the type and settings of your mobile device. Voice assistant activation is announced by beep sound in earphones.
Game/music mode : To switch between game/music modes, briefly tap the multi-function touch button on any handset three times.
ANC/transparency mode : To switch between ANC/transparent mode, tap the multi-function touch button on the left handset twice briefly.

LED Indicators

Earphones:
Low battery warning: acoustic signal
To charge earphones put them into the charging case and close the lid. Charging is indicated by flashing indicator [2], once earphones are fully charged indicator will turn OFF.
Charging case:
Charging is indicated by a flashing indicator [2], when the case is fully charged the indicator stops flashing.
Charging case battery indication:
0~25%, the first white light flashes [from left to right] 25%~50%, the first LED light stays on, and the second LED light flashes;
50%~89%, the first and second LED light stays on, and the third LED light flashes;
100%, all lights stay on

Charging

A charged battery provides power for several hours of operation at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels.
Caution : For charging, use only the original accessories supplied with the appliance. To achieve the maximum battery lifetime, it is best to start charging the battery after the low battery power notification.
Charge continuously until fully charged. When the operating time of the battery becomes very short, the battery’s lifetime has been use up.
Recommendation : If your earphones are not to be used for an extended period of time, we recommend to fully charge the batteries once every two to three months. We recommend to store the BT earphones and the charging box with the battery charged to prevent irreparable damage to the battery [loss of capacity].

Specification

• Bluetooth : v5.3 I BT
• profiles : A2DP\AVCTP\AVDTP\AVRCP\HFP\ SPP\SMP\ATT\GAP\GATT\RFCDMM\SDP\L2CAP
• Supported Bluetooth codecs : AAC/SBC
• Operating range : <1Dm
• Case charging : DC 5V [Type CJ / 2DD±2DmA
• Earphone charging time : 1,5h
• Case charging time : 2,Dh
• Playtime with ANC OFF : 7,5h [60%-700/o volume]
• Playtime with ANC ON : 6h [60%-700/o volume]
• Speakers diameter: 13 mm
• Frequency response : 20Hz – 20kHz
• Sensitivity: 98 dBA
• Impendences : 320
• Maximum transmitter power at 2,4GHz 2,4835GHz : 5mW
• Charging case capacity: 320 mAh [Lithium polymer
• Earphone capacity: 32 mAh [Lithium polymer
• Charging case dimensions: 57.5 x 50 x 25 mm
• Charging case weight : 37 g
• Single earphone weight: 4 g

Instructions and information regarding the disposal of used packaging materials

Dispose of packaging material at a public waste disposal site.

Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product.

The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details.
The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.
Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST ~R, a.s. declares that the radio equipment type [YHP 088T] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.yenkee.eu

Charge the rechargeable box and headphones to the maximum level before the first installation. Remove the TWS headphones from the rechargeable box and wait for them to turn on automatically. In your phone‘s settings, locate the headphones reporting the name „HARMON“, begin pairing. The successfully paired headphones are ready to be added to the „TUYA Smart“ app.
Recommendation. The „TUYA Smart“ app can be freely downloaded from the „Play Store“ and „APP store“,which is pre-installed on your mobile phone.
If you have successfully downloaded, installed and registered for the „TUYA Smart“ app, you can follow the steps below to add the „HARMON“ headphones.

1. Add the HARMON“ headset to the app with the „Add Device“ button
2. The application will start scanning all available devices compatible with „TUYA Smart“. Select the found headphones with the „Add“ button.
3. Successfully added „HARMON“ headphones will be confirmed with the text „ Added successfully“. Make the final confirmation with the „Done“ button at the bottom of the screen.

Controlling The Headphones In The „tuya Smart“ Application

1. Return to the main menu in the „TUYA Smart“ app
2. Play music control „PLAY / PAUSE“ go to the next or previous track / Volume control
3. Device information / other settings / removing the „HARMON“ headphones from the app
4. Left earphone charge level information
5. Charge level information of the right earphone
6. Headphone mode setting option „Noise Cancellation / Normal / Transparency“
7. Headphone position display „HARMON“ / headphone search by the tone
8. Preset equalizer selection/possibility to create your own equalizer
9. Setting the headphone touch behavior according to your own choice
10. Setting the display name/function on or off „GAME“ mode
    

Music Playback Control

• A) Previous song played – click on the icon
• B) PLAY / PAUSE – first click starts the music, the second click pauses the music
• C) Next song playing – click on the icon
• D) Increase volume – slide your finger up on the scale
• E) Volume down – slide your finger on the scale downwards
  

Device Information

• A) Changing the name settings within the „TUYA Smart“ application
• B) „HARMON“ handset information (virtual ID, device MAC address, etc.)
• C) Tap-to RUN and Automation function, monitor the information displayed in the app
• D) Device sharing – follow the displayed text for the function
• E) Creating device groups within the „TUYA Smart“ application
• F) Setting the headphone display localization – enable or disable the option
• G) FAQ
• H) Create a quick link on the desktop – for easy access to the device app
• I) Updates – if an update is available you will be notified here
• J) Removing the device from the „TUYA Smart“ app. If you want to add the „Harmon“ headset to another device with the „TUYA Smart“ app, it is necessary to first remove the headset in „HARMON“ on the last active device.
  

Charged Headphone Level Value

The battery level values for each headphone will be displayed in 10% increments. Each handset has its own charge level detection. The values of the left and right earphone may be different, so always use the lower value to decide the charge level from the charging box. The charge information within the bluetooth function of your phone will be different ( if your phone supports this function). The bluetooth value is calculated based on both charge level values.

Headphone Mode Setting Options

• A) ANC (Noise Cancellation) – to switch on the ambient sound cancellation function, click on the top position.
• B) NORMAL – the wipe position sets the headphones to normal mode without suppressing or accentuating ambient noise
• C) Transparency – over-click to the bottom position to turn on the ambient noise accentuation function
  

Display Current Headphone Position

• A) Return to the main menu of the „HARMON“ headphones
• B) Current position of „HARMONY“ headphones
• C) Zoom in on the current position of the headphones „HARMON“
• D) Tab to find the headphones that have been put away. Clicking on the PLAY/PAUSE icon and then confirming will beep the headphones for easier finding. The headphones must be switched on and removed from the rechargeable box. Once the headphones are found, pressing the PLAY/ PAUSE button will turn off the beeping.
• E) Card of the current position of the connected headphones „HARMON“. Headphone ONLINE/OFFLINE status information.
  

Preset Equalizer Selection

• A) Return to the main menu of the „HARMON“ headphones
• B) Selected equalizer information
• C) Enter the menu to create your own equalizer ( F, G, H, I setting options)
• D) Default audio signal
• E) Currently selected equalizer
• F) Exit the custom equalizer menu
• G) Setting to the default level of the equalizer you created
• H) Option to adjust the waveform in individual frequencies according to your preference. Press and hold the wheel, drag up or down to change the level [db] for each frequency [Hz] range.
• I) Save button. When you press the button, you will be prompted to enter the name of the equalizer you created. The equalizer you created will be included at the end of the list of preset equalizers.
  

Touch Behavior Settings

• A) Return to the main menu of the „HARMON“ headphones

• B) Resetting the settings to the default state

• C) 1XTouch ( the number indicates the number of touches of the touch surface of the „HARMON“ headphones) Up to 10 combinations can be set ( 5 combinations for the right and 5 combinations for the left touch button)
  „1X Touch“ – 1x button press
  „2X Touch“ – 2x button presses
  „3X Touch“ – 3 times pressing the button
  „4X Touch“ – 4x button presses
  „Long Touch“ – press and hold the touchpad

• D) Set the button function at 1 touch of the touch surface of the LEFT handset

• E) Set the button function for 1 touch of the touch surface of the RIGHT handset
  

Settings

• A) Return to the main menu of the „HARMON“ headphones
• B) In the settings menu you can change the name of the Bluetooth headset to „HARMON“. The headset will display the name you modified in other devices. For example, if you change the name from „HARMON“ to „YENKEE“ your phone will see the headphones under the name „YENKEE“.
• C) Enable/disable the Game Mode feature. Slide the button to the right to turn the function on. „Game mode“ – reduce latency in game mode.
  

Instructions and information regarding the disposal of used packaging materials

Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product.
The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative im pact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety.
Changes to the text, design and technical specifi cations may occur without prior notice and we reserve the right to make these changes.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>