optic arts LL42 Line LED Monochromatic Instructions

optic arts LL42 Line LED Monochromatic Instructions

Features

The Line LED Monochromatic is a small profile and energy efficient colored light strip available in amber, red, green, blue, yellow, violet, and royal blue. It is easily installed directly on to the mounting surface with double sided tape or within discrete mounting extrusions.

Mounting

LLED strip is equipped with 3M™ adhesive transfer tape (9472LE).

Applications

Indoor only – millwork, cove, architectural reveals, undercabinet, display case, handrail, accent lighting.

Approvals

Class 2 damp listed

Operating voltage

24 VDC

Life (L70)
50,000 hours

Warranty

5 years

Technical information

Section Start/End Options

SL
Soldered lead wires (72”)

LF
Lead Female 3” cable

LM
Lead Male 3” cable

NC
No connector

Ordering code

1. LL42 Wet monochrome lead time: 8 weeks upon order. Minimum order quantity: 100ft
2. Additional Connectors and Leads available, see below.

Minii Connectors

Minii connectors are easy, field-installable accessories that make joining LL strip simple! Their minimal width allows them to fit into extrusions, while their transparent frame eliminates dark spots.
Note: verify internal extrusion dimensions to confirm compatibility

LL-PJC-10-03
Jumper minii connector with 3” wire for LL42 LED strip

LL-PFC-10-72
Power feed minii connector with 72” wire for LL42 LED strip

LL-BSC-10
Butt splice minii connector for LL42 LED strip

Sample Layout

Accessories

CL1
Mounting clip

LVSP-4T-BK
Low Voltage, 4 Terminal Splice Box, Black

LL.ZIP
Cable/Wire Strain Relief Clip

Lens Options / Light Transmission

Installation

All mounting channels are field cuttable using miter saw with circular blade suitable for cutting aluminum

Ordering
Extrusions are sold separately. View respective spec sheets for details on ordering extrusions and their accessories (endcaps, mounting brackets, etc)

Led Dotting per Extrusion
using the frosted lens option

CD – Clear Dotting
SD – Slight Dotting
ND – No Dotting

Power Consumption

Tested at full power with PDC Series power supplies.

Voltage Drop Calculator

The below chart assumes nominal voltage of 24 Volts and a Voltage Drop Allowance of 3% through the wire

Power Supplies

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

0-10V Dimming Power Supplies 0.1% 120VAC – 277VAC

DALI 0% Dimming Power Supplies 120VAC – 277VAC

Features eddo LED’s LINEAR drive configurable dimmable drivers

Universal Power Supply 1% 120VAC – 277VAC”

60-60W
96-96W
3X96-3X96W
96-96W
3X96-3X96W

0-10V dims down to 1%, MLV/ELV/TRIAC dims down to 1%.
For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

MODEL| PDCU-W -96W| PDCU-W -3X96W| PDCU-D-30W| PDCU-D-60W| PDCU-D-96W| PDCU-D-3X96W
---|---|---|---|---|---|---
Length| 8.66″| 11.85″| 6.10″| 7.93″| 8.25″| 9.57″
Width| 3.73″| 4.32″| 3.35″| 3.35″| 4.10″| 5.94″
Depth| 1.61″| 1.81″| 1.33| 1.32″| 1.56″| 1.13″

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

Customizable Dim to Warm or Variable White via 0 – 10V
(for tunable white or warm dimming control of Dynamic option .

PS010VD- 0-10V Vintage Dim LED Driver
96 – 96 Watt
24 – 24 VDC
W2I – Standard dimming for both tapes
*Zonal control power supplies}

Non-Dimming Power Supply 120VAC – 277VAC

PSV – PSV Series
96 – 96 Watt
24 – 24 VDC
ND – Non Dimming
D – Damp

Enlighted Enabled Dimming Power Supplies 120VAC – 277VAC

PSV – PSV Series
96 – 96 Watt
24 – 24 VDC
ENL – Enlighted Dimming dims down to 0%
D – Damp

Triac, MLV, ELV Compatible Dimmers

PDC – (IP20) Power Supply
96 – 96 Watts
24 – 24 VDC

See Power Supply instructions and spec sheet for wiring information. For a complete list of compatible dimmers, see Compatible Dimming Chart on the Resources page.

In-Ground Power Supplies

IG – In ground CVE Series
CVE- ELV Dimming
DALI- eldo LED Dali dimming
96X2 – 2 X 96 Wat
24 – 24 VDC
Blank- 120 V
277- 240/277 V

Lumbini is a Lutron OEM Advantage Partner Lutron Power Supplies 1%

Lutron – Hi-lume™ 1% 2-wire LED Driver 40W max (120V forward phase only)

DMX Dimming Power Supplies 120VAC – 277VAC

SDMX – DMX Power Supply dims down to 0% 96
96- 96 Watt
3X96- 3 X 96 Watt }
24 – 24 VDC

PSDMX-3X96

Decoders

DMX512 decoder with RDM functionality features 5 PWM output channels with common anode. High PWM output frequency range allows the product to be used in HD video conferencing spaces. All DMX products to be installed per DMX512 Standard.


DDMX-5CH-RDM-PRO -DMX512 Decoder

Power
96 Watt

Inputs
RJ45, XLR-5Pin, Terminal Block

DMX Channels
1 to 5 settable

PWM Output Resolution Ratio
8 or 16 bit

PWM Output Frequency
500Hz – 30KHz

Output Dimming Curve Gamma Value
0.1 ~ 9.9

Translates controller DMX512 programs for RGB and white LED strips. Unique DMX address for the decoder can be set easily and displayed by the numeric display on the case. Changing and resetting the DMX address requires manual input. Use power repeater to expand output (Luminii part# RGBW-SR).


DDMX-RGBW – DMX512 Decoder

Operating Voltage
12-36 VDC

Power Capacity
up to 96W at 24V

Operating Temperature Range
from -4˚F to +122˚F in case

PWM Output Frequency
200Hz or 1500Hz

The RGBW receiver is easily paired with controller by the click of a button. Receiver can be reset to factory settings at any time.

Each receiver can store one static RGB color, one color sequence, and one brightness setting for the white LED strip. Receivers assigned to the same scene within the same zone will have the same LED static color and color sequence.


RGBW-RC-R – RGBW receiver

Operating Voltage
12-36 VDC

Power Capacity
up to 96W at 24V

Operating Temperature Range
from -4˚F to +122˚F in case

Extends identical signal when connected in series to an RGBW LED control system. The RGBW signal repeater works with Luminii RGB and RGBW controllers, receivers, and decoders.
RGBW signal can be extended indefinitely when adequate power supply (not included) is connected to the system.

RGBW-SR – RGBW signal repeater

Operating Voltage
12-36 VDC

Power Capacity
up to 96W at 24V

Operating Temperature Range
from -4˚F to +122˚F in case

RGBW-WI-R creates a local network that enables any electronic device (phone, tablet, etc.) to control the RGB/W strip connected to a RGBW-RC-R receiver.

The control functions are achieved through a free application download for Android and iOS devices called REALCOLOR.


RGBW-WI-R – WIFI generator

Operating Voltage
12-36 VDC

Power Supply
PI-130-24 (included)

Operating Temperature Range
from -4˚F to +122˚F in case

Programmable advanced DMX512 lighting controller featuring a touch-screen interface. Operates as stand alone controller or integrated with most architectural lighting control systems. Can controller endless DMX512 enabled devices.
Mounts to standard single or dual gang wall box with the included power supply inside the junction box. Terminal block design for power and data connections.


TSDMX-E – Touchscreen DMX controller

Features

• Sleek glass design which sits 0.43” from the wall
• Graphical color display to show selected environment
• Color/dimmer/speed palette
• Color temperature mixing
• Touch sensitive buttons. No mechanical parts
• Touch sensitive wheel allows for accurate color selection
• Multi-zone microSD memory
• Multi-room control with 500 scenes, 10 zones
• 1024 DMX channels. Control 340 RGB fixtures
• USB & Ethernet connectivity for programming and control

Power Supply
7 VDC (included)

Programmability
PC, Mac, Tablet, Smartphone

Output Signal
DMX512 (1024 channels)

Color Parameters

• Brightness
• Saturation
• Speed of color changing sequence
• Fading / dimming / brightness

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>