AQUALUX AQL-400 Spike Spot Light Instruction Manual
- June 16, 2024
- AQUALUX
Table of Contents
AQL-400 Spike Spot Light
Instruction Manual
AQL-400 Spike Spot Light
AQL-400
Spike Spot Light
SPECIFICATIONS
| Product Code | AQL-400 |
|---|---|
| Family | Hydra |
| Construction Material | Solid Cast Brass |
| Cable | 500mm Fig 8 cable |
| IP Rating | IP65 |
| Warranty | 5 Year Aqua lux Warranty |
| Additional | MR16 LED Drop In Lamp |
CONFIGURED OPTIONS
| Variant Code | AQL-400-B1M |
|---|---|
| Body Colour | B1 – Brushed Chrome |
| Control Gear | MR16 |
| Dimming | Lamp Dependent |
Aqua lux Warranty September 2021
AQUALUX LIMITED WARRANTY INFORMATION
Aqua lux sources, designs, and manufactures advanced landscape lighting of
many diferent varieties. We utilize the highest-grade components manufactured
inhouse as well as sourced from around the globe and assembled in our quality-
controlled Sydney, Australia facility.
From time to time, for a variety of possible reasons, our products may
experience an issue after installation. This page details the various
warranties our products carry, the causes of product failure that we have
experienced over time, and the steps necessary to make a warranty claim
should that be necessary.
FIT-FOR-PURPOSE & INSTALLATION REQUIREMENTS
All warranties offered in addition to the statutory requirement of 1 Year are
done so on the condition that Aqua lux lighting products are fit-for-purpose
and installed professionally by qualified persons and that all guidelines and
requirements are followed.
Fit-for-purpose in this context refers to the intended application our
products are designed for which is residential and commercial garden &
landscaping environments.
Products not specifically designated IP68 are not fit for submersion, either
intended or accidental.
REMOTE, DIFFICULT & UNUSUAL INSTALLATIONS
Where Aqua lux products are installed in unusual, remote, or difficult to
access locations and environments, this is done so at the end user’s risk.
Where warranty issues arise, Aqua lux is limited in its liability to the cost
of repairing or replacing the product only.
Examples of remote & unusual installations include (but are not limited to)
jobs that require scissor lists, traffic management, significant labor, or the
removal of paneling or other secondary installation materials. If you are
uncertain, please contact us to discuss 1300-662-644 /
sales@aqualux.com.au
AQS SERIES STRIP LIGHTING
Please pay particular attention to our fit-for-purpose and unusual
installation warranty notes when designing with AQS LED Strip Lighting.
Whilst LED strip lighting allows for unique and previously impossible lighting
effects to be achieved, it is still a sensitive electronic product that is
potentially subject to failure through a variety of modes including (and most
often) improper handling during installation.
All Aqua lux AQS products are tested before they leave our factory. We
strongly advise customers to test the product prior to installation. Aqua lux
is not liable for any costs associated with accessing or replacing the AQS-
Series strip.
WARRANTY CLAIMS PROCEDURE
To make a claim for service to repair or replace a product under an Aqua lux
warranty, contact the original reseller and/or installer of the product.
They will generally be able to process the claim on your behalf. If your
original reseller is no longer in business or you are not sure who it may have
been, please contact us directly with a photo of your product and a summary of
the issue. Aqua lux may elect to repair or replace your product depending on
the nature of the fault and product serviceability.
CABLE TERMINATION REQUIREMENTS
Cable terminations and joins must be IP-rated for this warranty to apply.
Joins and connections that are not fit-for-purpose or that are manifestly
unsuitable will not be serviced by Aqua lux and any product failure arising
from such terminations will not be claimable under this warranty.
Please refer to the cable join / termination guide available on our website
for more information.
QUICK CONNECT CABLES
Where a product has a quick connect cable, anti-siphon device, or other
feature(s) it/ they should never be removed. Doing so will void your warranty
and in the event of product, failure makes the job of repair/replacement
unnecessarily more difficult and costly. If you are concerned one of these
features may impact your ability to install our products contact us prior to
your order placement.
THE FINE PRINT
Aqualux Lighting is a brand wholly owned by Telectran International. Telectran
International Pty. Ltd. (“Telectran”) warrants to the purchaser of products
described herein that they be free from defects in material and workmanship
for a period commencing at the date of purchase and expiring at the end of
the period specified (the “warranty period”).
No other warranty, whether express or implied, including any warranty of
merchantability or fitness for a particular purpose, shall exist in connection
with the sale or use of such products.
Defects that are, in the sole judgment of Telectran, the result of an
accident, misuse, abuse, neglect, mishandling, misapplication, faulty
installation, unauthorized repair, modification, or acts of God will not be
covered by this warranty.
Telectran shall not be liable for incidental or consequential damages,
including but not limited to Labour costs or lost profits resulting from the
use of or inability to use the goods or from the goods being incorporated in
or becoming a component of any other product. Without limiting the generality
of the foregoing, Telectran will not be responsible for Labour costs involved
in the removal of goods or the installation of replacement goods.
If a problem develops with a product during the warranty period call or email
us. We may be able to help you identify specific problems and possibly solve
them before the unit is returned to us for repair or replacement. In any case,
DO NOT RETURN ANY GOODS WITHOUT OBTAINING A RETURN NUMBER and instructions
from us.
Telectran cannot be responsible for damage due to shipping or improper
packaging when returning goods. Please see our returns policy for further
information.
Upon receipt of a claim, Telectran shall inspect the part or parts claimed to
be defective, and we shall repair, or at our discretion, replace, free of
charge, any part or parts which we determine to have been defective.
APPLICABLE WARRANTY PERIODS
If you cannot find your product below, please contact us. Warranty periods are
subject to change without notice – this will not affect an existing purchase.
| Product code or family | Warranty (years) |
|---|---|
| AQL-450, 451 & 452 “ Turbo” | 5 years |
| AQL- 4 0 0 to AQL- 42 0 | 5 years |
| Lumina / Lumina Pro Range | 7 years |
| AQL-910, 911, 912 & 913 | 3 years |
| AQA Artisan Range | 10 years |
| AQS Strip Light | 3 years |
| Aquarian AQD DC | 5 years |
| Other AQD Control Gear | 3 years |
| AQL- 4 5 5 “ E c o” | 2 years |
| AQL-510, 520, 530, 540, 565 & AUL-03 AUL-04 | 7 years |
| AQL-600 Range | 3 years |
| AQL-9 3 1 & AQL-9 3 3 | 5 years |
| Festoon and Fairy Lights | 3 years |
| Aquarian AQO AC | 10 years |
| AGL Globes | 3 years |
Visit www.aqualux.com.au for full product details
and
available options / +612 9454 7900 /
sales@aqualux.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>