Kwumsy S1 Laptop Screen Extender User Manual
- June 16, 2024
- Kwumsy
Table of Contents
Kwumsy S1 Laptop Screen Extender User Manual
Tips:
The screen extender requires both Power & Signal to work properly.
- Please make sure your laptop port is full featured Type-C or Thunderbolt 3.0/4.0; and Type-C to Type-C cable correctly connected to extender Type-C port for 1 cable Connection
- For Non Full Featured Type-C port which could not provide power and signal at the same time, please connect extra HDMI to Type-C cable to provide signal to the screen extender
- Use 65W or above adapter and connect to Type-C port of screen extender if you want to PD charge your laptop from extender. (HDMI port is for signal Only. Adapter not provided)
Product Introduction
S1 laptop screen extender is a multi-function plug and play portable monitor
for laptop which is foldable and extendable. The laptop screen extender is no
driver needed and compatible with Macbook, Windows, Chromebook, Linux, Switch,
Playstation, Xbox and smart phones.
Power and signal are required at the same time to work the laptop screen
extender. “No Signal” will show on the screen of the extender and screen will
turn off if there is only power but no signal delivered to the extender.
Full featured USB-C port is capable of power and signal at the same time which
could work properly connected with provided L shape USB-C to USB-C cable to
Type-C port of laptop screen extender.
Non full featured USB-C port is capable of power only, which needs extra HDMI
to Type-C connection to laptop screen extender for signal to work properly. (
Non full featured Type-C port, needs 2 cables to work laptop screen extender
S1).
S1 laptop screen extender is capable of PD charging from screen extender to
laptop. 65W or above adapter is needed for PD charging. Adapter is not
provided. Power should connect to Type-C port of screen extender.
S1 laptop screen extender screen is 0-180° rotatable. You can change settings
by short press and roll the roller at the top of the screen extender.
S1 laptop screen extender is expandable and clamp to laptop screen to use. The
laptop screen extender fits laptop width from 11.8 to 15.8 inches ( fits most
laptop size from 13.3 to 17 inch).
Product Attributes
Product Introduction
Packing List
-
HOST
-
USB-A to USB-C
-
USB-C to USB-C
-
HDMI to TYPE-C
-
BAG
Datasheet
| Weight | 1.06 Kg | Screen Size: | 14 Inches |
|---|---|---|---|
| Aspect Ratio: | 16:9 | Panel Type | IPS Wide Viewing Angle |
| Size: | 353x207x23mm | Average Brightness: | 300CD/M² |
| Refresh Rate | 60hz | Type-C Input: | 5V-20V/5A Max |
| Resolution: | 1920×1080 P | Type-C Output: | 5V-20V/4.25A Max |
| Speaker: | 1 | Ports: | Type-C x3 |
Installation and Storage
Expand the monitor
Stretch the frame
Adjust the stand
Open Sequence
Close Sequence
Note : Please follow the sequence of open and close to avoid damage of
the screen extender
When folding the screens, pull the bracket out to the appropriate position, and fix the screen in the silicone of the bracket. Otherwise , forcibly closing will damage the screen.
Key Definitaion:
How to Connect
, Connect S1 to Laptop
Full Featured Type-C Connection (1 Cable Connection):
Non Full Featured Type-C Connection (2 Cables Connection)
For non full featured Type-C port which could not provide power and signal at
the same time, extra cable to provide signal is needed.
1 USB-A to Type-C connect laptop to screen extender for Power
1 HDMI to Type-C connect laptop to screen extender for Signal
Connect S1 with Mobile Phone or Other Devices
Audo Settings
Change Sound Settings of Windows 10/11
Right click the loudspeaker icon at the bottom right
Select “Swith on sound” in pop-up interface
Left click “turn on sound settings” in pop-up interface
Here users can set about sound
- Master Volume
- Select output device: (S2 / Speaker)
- Device attributes
Change sound Settings of MacOS PC
Choose Apple menu > System Settings
Click “Output”, then select the device you want to use for the list of sound
output devices: (S2 / Speaker)
Display Mode
Windows 10/11 Display Settings
Right click a blank area of the desktop. Select “ Display Settings” from the
pop-up interface. Left click “Display Settings” to open the settings interface
show as below:
Under the “ Rearrange displays” section, drag and drop each display to rearrange them according to their physical layout of your desktop. Scroll down to the bottom of the page to further configure the display for extended or mirrored mode.
MacOS 13 Ventura Display Settings
Enter the “System Preferences” Menu
Configure your monitor
In this menu, you can set the resolution and mirror/extend the display you
want
Arrange Displays
To rearrange the displays, drag them to the desired position.
To mirror display, hold Option key while dragging them on top of each other.
To relocate the menu bar, drag it to a different display.
Troubleshooting
| Error | Possible Cause | Solution |
|---|---|---|
| Doesn’t power on | No power delivered to laptop screen extender; or USB-C cable | |
| connected to HDMI port of screen extender | Try another port or power the |
laptop monitor extender with adapter. HDMI port of monitor extender is for
signal only.
No Signal| No signal delivered to portable monitor for laptop| Try another
full featured type-C port with Type-C to Type-C cable; or connect with extra
HDMI to USB-C cable to provide signal
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>