Govee H7120 Life Smart Air Purifiers for Bedroom User Manual
- June 16, 2024
- Govee
Table of Contents
User Manual Goveelife Air Purifier
Model: H7120
READ AND SAVE THESE INSTRUCTIONS
Safety Instructions
General Safety
-
Only use the air purifier as described in this manual.
-
Do not use the air purifier without removing the plastic wrap from the filter. If not removed, the air purifier will not filter air, and may overheat, causing a fire hazard.
-
Do not use the air purifier outdoors.
-
Keep the air purifier away from water or wet, damp areas. Never submerge it in water or liquid.
-
Do not use the air purifier in excessively humid areas.
-
Keep the air purifier away from heat sources such as stovetops, ovens, or radiators.
-
Do not use the air purifier in places where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
-
Keep the air purifier Sft (1.Sm) away from where oxygen is being administered.
-
Supervise children when they are near the air purifier.
-
Do not place anything into the openings of the air purifier.
-
Do not place heavy objects on the air purifier.
-
Keep the inside of the air purifier dry. To prevent moisture build up, avoid placing t n rooms with major temperature changes or underneath air conditioners.
-
Always unplug the air purifier before servicing (such as changing the filter).
-
Do not use the air purifier if it is damaged or not functioning well, or if the cord or adapter is damaged.
Do not risk repairing the air purifier by yourself. Contact customer support for assistance. -
Not for commercial use. Household use only.
WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Air Purifier With Any Solid-State Speed Control Device.
Power Adepter & Cord
- Place the air purifier near the electrical outlet it is plugged into.
- Never place the cord near any heat sources.
- Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
- Keep the cord out of areas where people frequently move around. Place the cord in places where it will not be tripped over.
- Only use original supplied power adaptor.
If the power adapter cord is damaged, it must be replaced by qualified persons in order to avoid an electric or fire hazard.
Included in the Box
Item | Quantity |
---|---|
Air Purifier | 1 |
HEPA Filter (Pre-Installed) | 1 |
Aroma Pad | 1 (In the Aroma Box) |
2 (External)
Quick Start Guide| 1
User Manual| 1
Introduction
Part Names
a. Air Outlet
b. Touch Control Panel
c. Aroma Pad
d. Aroma Box
e. Housing
f. DC Input Port| g. Air Inlet
h. Filter Cover Handle
i. Non-Slip Pads
j. 3-in-1 HEPA Filter
k. Adapter Output Cable
l. Power Adapter
---|---
Control
You can access additional features using Govee Home App.
- Controls & Functions
On/Off Button
Touch to turn on/off.
Fan Speed Button
Touch to cycle through fan speeds: I (low), II (medium), and Ill (high).
Note: When the air purifier is in Sleep Mode, touching the Fan Speed Button
will exit those modes (if the screen display s on).
Timer Button
Touch to cycle through the following timer options: 2H, 4H, and 8H. The air
purifier will turn off automatically when the set timer expires.
Sleep Mode Button
Touch to turn Sleep Mode on or off. When Sleep Mode is on, the air purifier
will work at its lowest noise setting and the panel will dim its brightness
for more comfortable use at night.
Night Light Button
Touch to turn the Night Light on or off
Note:
- Please open Govee Home App to access more settings of the night light about brightness, colors, lighting effects etc. The parameters will be saved and will restore automatically when the night light is turned on next time.
- The night light will turn off automatically when the air purifier is turned off.
- The night light can still be turned on when the air purifier is on the Off mode.
Filter Change Indicator Button
Long press for 3s to reset the filter after replacing the old filter with a
new one. If the filter change indicator flashes 3 times, the reset is
completed. When the filter expires, the change indicator will light red.
Note:
- After the filter is reset, its usage time will be recalculated.
- The filter change indicator can also be reset by pressing the button for 3s even if it does not light up.
- For the best performance, use Goveelife filters that are adaptable to H7120 air purifier.
Recovery Button
Long press for Ss until all indicators flash once to restore the air purifier
to factory settings if it cannot function well. The air purifier will
disconnect from Wi-Fi and Bluetooth and automatically reboot.
Note: After restoring the air purifier to factory settings, go to “My Devices”
page on the app to delete this air purifier first, otherwise, it cannot be
added to the app again.
Memory Function
The air purifier will save its previous settings when powered off (such as
speed, mode, and Wi-Fi connection). When t is powered back on, the settings
will resume.
Indicator Status
Indicator | Working Status | Light Status |
---|---|---|
I | Low Speed | Solid White |
II | Medium Speed | Solid White |
III | High Speed | Solid White |
2H | Auto-Off in 2 Hours | Solid White |
4H | Auto-Off in 4 Hours | Solid White |
8H | Auto-off in 8 Hours | Solid White |
Night Light is On | Solid White | |
Sleep Mode is On | Dim | |
Filter is Expired | Solid Red | |
Filter Reset Successfully | Triple Flashes | |
Ready for Wi-Fi Connection | Slowly Flashes White | |
Wi-Fi is Connecting | Quickly Flashes White | |
Wi-Fi is Connected | Solid White |
Getting Started
Using the air Purifer
- Rotate the bottom filter cover counterclockwise and take it out
- Remove the filter from ts plastic packaging and place it back into the air purifier.
- Reattach the filter cover and rotate clockwise to lock. The sound of “dah” indicates the filter cover is tightened up.
- Place the air purifier on a flat, stable surface with the panel facing up. Allow at least 8in/20cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains and cabinets.
- Insert the adapter output cable into the DC input port, then plug the power adapter into a 120V socket. Now your purifier is ready to use!
Using the Aroma Box
- Press to pop out the aroma box from the back of the base.
- Add 8 to 10 drops of essential oil on the aroma pad. Be careful not to spill essential oil out of the aroma box to avoid contaminating the inside of the product.
- Push the aroma box back into the air purifier.
- Turn on the air purifier. The air purifier will automatically diffuse the aroma when using.
Note: For better aromatherapy, always clean the aroma pad before adding new essential oils. Do not mix essential oils.
Govee Home App
You can access more features using Govee Home App.
Downloding Govee Home App
To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android).
https://www.govee.com/apps/qrcode
Note:
- Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information.
- Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of any differences, always follow the in-app instructions.
Pairing with Govee Home App
- Turn on your smartphone’s Bluetooth.
- Open Govee Home App, tap the”+” icon in the top right corner and search for “H7120”.
- Tap the device icon and follow the in-app instructions to complete the Bluetooth and Wi-Fi connection.
Note:
-
Method to turn off Bluetooth and Wi-Fi connection: Press and hold the Power Button and Fan Speed Button for Ss to restore the device to factory settings, then go to “My Devices” page on the app to delete this air purifier first, otherwise it cannot be added to the app again.
-
You can use Govee Home App to connect your air purifier to Amazon Alexa or Google Assistant.
Click the icon on right upper corner of the details page of the device to follow the in-a pp nstructions to connect to each voice assistant. -
Govee Home App is being continually updated and its features do expand.
Using the Filters
3-Stage Filtration System A. Pre-Filter
-
Captures large particles such as dust, lint, fibers, hair, and pet fur.
-
Maximizes the filter’s life by protecting it from large debris.
B. HEPA Filter -
Captures 0.3 microns (µm) airborne particles.
-
Filters small particles such as fine dust, smoke particles, pollen, and pet dander.
C. Activated Carbon Filter -
Physically adsorbs smoke, odors, and fumes.
-
Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs).
Essential Oils
- Only add essential oils to the aroma pad located in the aroma box near the top of the air purifier.
- Do not add essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasant smell.
Clean Air Delivery Rate
-
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that t produces per minute, which is based on the removal of three most common indoor air pollutants including dust, pollen, and smoke. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean.
-
This air purifier has a Clean Air Delivery Rate of 70 cubic feet per minute (CFM), or 119 m /h, which is measured at the air purifier’s highest speed.
Note: -
To effectively clean the air, keep windows and doors closed when the air purifier is on.
Standard Enviroment Precautions
Humidity
Moisture may damage the filters. This air purifier should be used in an area
with a humidity level below 85% RH. If you use the air purifier in excessively
humid areas, the surface of the filter will become moldy.
Care & Maintenance
Caution: Do not clean with abrasive chemicals or flammable cleaning
agents.
Cleaning the Air Purifier
- Unplug the purifier from power before cleaning.
- Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth and leave it to dry.
- Vacuum the inside of the air purifier.
Cleaning the Pre-Filter
Do not clean the filter with water or other liquids. The outer pre-filter
should be cleaned every 2-4 weeks to ncrease its efficiency and extend its
lifespan. The pre-filter should be cleaned by a soft brush or vacuum hose to
remove hair, dust, and large particles.
Filter | When to Clean | When to Replace |
---|---|---|
Pre-Filter | Vacuum Every 2-4 Weeks | 6-8 Months |
True HEPA & High-Efficiency
Activated Carbon Filter| Do Not Clean
Note: A 3-stage filter includes a Nylon Pre-Filter, HEPA Filter, and
Carbon Filter.
The three parts of the filter should be replaced as a single unit.”
Replacing the Filter
- Unplug the air purifier.
- Remove the old filter.
- Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier.
- Unwrap the new filter and place it into the housing.
- Reattach the cover. Plug in the air purifier.
- Reset the Filter Change Indicator.
Note:
- To ensure the best performance of your air purifier, only use official Goveelife filters. To buy replacement filters, visit Goveelife’ s online store.
- Remember to reset the Filter Change Indicator after changing the filter.
Filter Change Time Period
The filter should be replaced every 6-8 months, depending on how often you use
it. If you always use your purifier in a relatively high pollution
environment, you may need to change the filter more frequently, even if the
change indicator does not light up.
Any of the following situations may indicate that you need to change your
filter:
- Increased noise when the air purifier is on
- Decreased airflow
- Unusual odors
- Avisibly clogged filter
Resetting the Filter Change Indicator
When the Filter Change Indicator lights red, it indicates that the filter life
needs to be reset.
- Long press for 3s. will flash 3 times and then die out once the filter life is successfully reset.
- will light up as a reminder to replace the filter. The indicator will light up when you use the purifier for 6 to 8 months. When b turns on, you may not need to replace your filter immediately, but you should check the filter and plan to replace it soon.
- After you replace the filter, remember to reset the Filter Change Indicator.
Cleaning the Aroma Pad
- Press to pop out the aroma box and take it out.
- Take the aroma pad and wash it with warm water.
- Clean it with a clean cloth and put it back into the aroma box.
- Push the aroma box back into the air purifier.
Note: Do not pour liquid cleaners or detergents onto the aroma pad or into the
aroma box.
Replacing the Aroma Pad
- The aroma pad might need to be changed if it is deformed or damaged after repetitive washing.
- If you are refilling the same fragrance oil onto the pad then you probably will have to change pads during a 90-120 day period.
- To ensure better effects of the aromatherapy, only use official GoveeLife aroma pads.
Storing
If not using the air purifier for an extended period of time, wrap both the
air purifier and the filter in plastic packaging and store in a dry place to
avoid moisture damage.
Troubleshooting
The troubleshooting section below is for solving frequently asked questions
for the purifier unit.
If your problem persists, please contact customer support.
For Air Purifier
Problem | Possible Solution |
---|
Air purifier cannot turn on or respond
to button controls.| Plug in the air purifier.
Check to see if the power cord is damaged. If so, stop using the air purifier
and contact Customer Support.
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer Support.
Airflow is significantly reduced.| Make sure the filter is removed from its
packaging and properly in place.
Tap to increase the fan speed.
Make sure there are at least 8in/20cm of clearance on all sides of the air
purifier.
The pre-filter may be clogged by large particles such as hair or lint,
blocking the air flow. Clean the pre-filter.
Replace with a new filter.
Air purifier makes an unusual noise
while the fan is on.| Make sure the filter is properly in place with plastic
packaging removed.
Make sure the air purifier is operating on a hard, flat, level surface.
Replace the filter.
The air purifier may be damaged, or a foreign object may be inside.
Stop using the air purifier and contact Customer Support. Do not try to repair
the air purifier.
Strange smell is coming from the air purifier or it has poor odor removal
ability.| Clean the filter and aroma pad or replace if necessary.
Make sure not to use your air purifier in an area with high humidity.
Remove the filter and expose it to the sun, until the smell can be reduced
from the activated carbon filter.
Poor air purification quality.| Tap to increase the fan speed.
Make sure no objects are blocking the sides or the top of the air purifier
(the inlet or outlet).
Make sure the filter is fully removed from its packaging and is properly
secured in place.
Close doors and windows while using the air purifier.
If the room is larger than 150ft 2/14m2 , air purification will take longer.
The air purifier may not be as effective in significantly larger rooms.
Replace the filter.
Filter Change Indicator is still on after replacing the filter.| Press and
hold for 3s. will flash 3 times and turn off once successfully reset.
Filter Change Indicator does not light up within 8 months.| is a reminder for
you to check the filter and will light up based on
how frequently the air purifier has been used. If you don’t use your air
purifier often will take longer to turn on.
For App & Connectivity
-
Cannot connect to Govee Home App.
• Make sure your smartphone is powered on and is not connected with other Bluetooth devices.
• Enable the smartphone’s Location Services.
• Try connecting with another smartphone.
• Make sure your app is updated to the latest version.
• Make sure you connect to your Wi-Fi router’s 2.4GHz network and that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• Shorten the distance between the air purifier, Wi-Fi router, and the smartphone. Make sure your air purifier and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc).
• If you are using a VPN, try turning it off and then connecting the air purifier.
• Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this air purifier will not be able to access your Wi-Fi network and setup will fail. Portal authentication means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet. -
Cannot find the device on Bluetooth Device Nearby page of the app.
• The air purifier may be connected with another smartphone. Disconnect it from the other smartphone first. -
The air purifier is offline.
• Make sure the air purifier s plugged in and powered on, then refresh “My Devices” in Govee Home App by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network connection s working.
• If the Wi-Fi password has been changed, the air purifier will automatically go offline. Try connecting it to the network again.
• Delete the offline air purifier from Govee Home App, then add and reconfigure the air purifier again n the app.
Appendix
After – Sales Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee @goveeofficial @govee.official
@GoveeOfficial @GoveeOfficial
Specifications
Power lnput(Adapter) | 100-240V AC 50/60Hz |
---|---|
Power lnput(Air Purifier) | 24VDC |
Rated Power | 11.SW |
Effective Range | 150ft2/14m2 |
Note:
• Effective for larger rooms, but purification will take longer.
• Determined by CADR.
CADR| Smoke: 52.9dm/90m3/h
Dust: 72.9dm/124m3/h
Pollen: 82.2dm/140m3/h
PM2.5: 62.1dm/106m3/h
Noise Level| 24-46 dB
Air Purifier Dimensions| 6.96.911 in/17.517.528.1 cm
Air Purifier Weight| 3lb/1.4kg
Working Temperature| 14° to 104°F/-10° to 40°C
Working Humidity| <85% RH
Compliance Information
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation s subject to the
following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communica tions. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/lV technician for help.
FCC Radio Frequency Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
The following importer s the responsible party
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information:
https://www.govee.com/support
Energy Star
The energy efficiency of this ENERGY STAR certified model is measured based on
a ratio between the model’s CADR for Smoke and the electrical energy it
consumes, or CADR/Watt.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech.
Co., Ltd. is under license.
Goveelife is a trademark of Shenzhen lntellirocks Tech. Co., Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd. All Rights Reserved.
https://www.govee.com/apps/qrcode
For FAQs and more information,
please visit www.govee.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>