IKEA ICPSW24-19-1 ANSLUTA LED Driver with Cord Instructions
- June 16, 2024
- Ikea
Table of Contents
IKEA ICPSW24-19-1 ANSLUTA LED Driver with Cord
Product Information
Technical Data
- Type: ICPSW24-19-1
- Input: 100-240 VAC, 50/60 Hz, 0.4A, 23.0W
- Output: 24.0 V DC
- Max total load: 0.8A, 19.0W
Manufacturer: IKEA of Sweden AB
This device complies with Part 15 of the FCC Rules. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation Science and Economic Development Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Product Usage Instructions
Indoor Use Only
The ANSLUTA device is designed for indoor use only. It should not be used outdoors or in wet environments.
Facility
- Ensure that the input voltage matches the specifications provided (100-240 VAC, 50/60 Hz).
- Connect the device to a power outlet using the provided power cord.
- Make sure the total load connected to the device does not exceed 0.8A, 19.0W.
- Ensure proper ventilation around the device to prevent overheating.
Operation
To operate the ANSLUTA device:
- Make sure the device is connected to a power source and turned on.
- Connect your compatible devices to the ANSLUTA device using the appropriate cables.
- Follow the instructions provided with your compatible devices to ensure proper functionality.
FAQs
Q: Can I use the ANSLUTA device outdoors?
A: No, the ANSLUTA device is designed for indoor use only and should not be used outdoors or in wet environments.
Q: What should I do if the total load connected to the device exceeds 0.8A, 19.0W?
A: It is important to ensure that the total load connected to the ANSLUTA device does not exceed 0.8A, 19.0W. If you need to connect additional devices, consider using a separate power source or consult an electrician for assistance.
Q: How should I dispose of the ANSLUTA device?
A: The ANSLUTA device should be disposed of separately from household waste. Please hand it in for recycling in accordance with local environmental regulations for waste disposal. Contact your IKEA store for more information.
Good to know
- Device may get warm during use this is completely normal .
- Operating temperature: 5°C to 35°C (41ºF to 95ºF).
- Unplug the product from the power source before cleaning .
- To clean the product, wipe with a dry cloth.
- Never submerge the product in water.
WARNING
- Use only indoors in dry areas.
- Children should be supervised to ensure they do not play with the product.
- If the cord is damaged the appliance shall be destroyed.
- Do not cover when in use.
- Do not overload the product.
Save these instructions for future use.
Technical data
- Type: ICPSW24-19-1
- Input: 100-240 VAC, 50/60 Hz, 0.4A, 23.0W
- Output: 24.0 V DC
- Max total load: 0.8A, 19.0W
Indoor use only
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
FCC
This device complies with Part 15 of the FCC Rules.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation Science and Economic Development Canada’s licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.
WARNING:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the quipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.