G-POWER C60Q 80W Power Station User Manual

G-POWER C60Q 80W Power Station

Package Contents

• Power Station

• C-C Cable

• User Manual

Specifications

Product Overview

Thank you for choosing the G-power Power Station Series 20000mAh. Please read this user manual carefully and keep it in a safe place for future reference. If you need any further assistance, please contact our customer support team at [email protected].

LED Indicator

There are five LED indicators to display the battery level status of the portable power station. When being recharged, the LED indicators will light up based on the current battery level:
Charging: ( : LED flashes; : LED is off; : LED is on.)

When devices are discharged, the LED indicators will light up as follows:
( : LED flashes : LED is off; : LED is on.)

• USB Low Output: When the power of the USB and Type-C output is too low, the power station will automatically stop working.
• Low Battery: The last LED flashes in blue.
• Protection Activation: When an abnormal connection is detected, all of the LED indicators will flash and the portable power outlet will cut off all connections. To start using it again, recharge the device or press the Power Button.

Power Button

• When the AC output is off, press the Power Button for 3 seconds to turn on the AC output and show the remaining battery level.
• When the connected device is fully charged, the AC output will automatically shut off. Turn it on again before charging another device.
• If the AC output fails, press the Power Button for 3 seconds to turn on the AC output again.

How to Use

• Use the Type-C cable to connect the portable power station to your device and charging will start automatically. If nothing happens after connecting your device, press the Power Button to restart the power station.
• Press and hold the power button (at least 3 seconds) to turn on the AC output. The AC output will shut off automatically when no output is loaded after being powered on for 6 hours..
• Press the Power Button once to check the remaining battery level.
• Use a 30w PD 3.0 charger to charge the portable power station.

Cautions

• It is normal for the portable power station to become slightly warm during charging/discharging.
• Keep it away from heat sources and liquids.
• Please do not dismantle this product.
• Fully charge the portable power station at least once every 6 months.

Warranty Information

• Products are covered by an 18 month limited warranty from the date of its original purchase, If any problems occur, please contact our support team.
• We can only provide after-sales service for products sold by authorized retailers and resellers. If you have purchased your product from a different place, please contact your seller for return and warranty issues.

Important Safety Instructions

1. When using this product, basic precautions should always be followed, including the following: 1. Read all the instructions before using the product.
2. To reduce the risk of injury, close supervision is necessary when the product is used near children.
3. Do not put fingers or hands into the product.
4. Do not expose the product to rain or snow.
5. Use of a power supply or charger not recommended or sold by manufacturer may result in a risk of fire or injury to persons.
6. Do not use the the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
7. Do not use the the product that is damaged or modified, Damaged or modified batteries may cause unpredictable behavior resulting in fire, explosion or risk of injury.
8. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
9. Do not expose the product to fire or excessive temperature, Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°C can be replaced by the temperature of 212°F.
10. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
11. Switch off the product when not in use.
12. Do not place or use this product in high temperature or damp environment. Do not expose it to the sun.
13. Dispose the product according to the local statues environmental protection regulations.

SAVE THESE INSTRUCTIONS

FCC Compliance

This product complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

1. this product may not cause harmful interference, and
2. this product must accept any interference received, including interference that may cause undesired operation.

Get 24/7 Assistance at

Use camera or QR scanner to scan
Or Visit: https://gpower.afterservice.vip

E-mail: [email protected]

Manufacturer: SHENZHEN GNZ ENERGY CO., LTD.
Address: Room 2001, Plant 4#, B&K Science and Technology Industrial Park, Guangming High-tech Industrial Park, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>