Vacsafe 3238W Industrial Wet Dry Vacuum Cleaner Instruction Manual
- June 16, 2024
- Vacsafe
Table of Contents
INDUSTRIAL WET/DRY VACUUM CLEANER
INSTRUCTION MANUAL
MODEL 3238W
PARTS NAME
APPLICATION:
There are 3 motors inside of the vacuum cleaner. With high power, powerful suction and minimum noise, it is widely applied in shops: airports; exhibition halls; conference rooms and various public occasions. Controlled respectively by two switches, the two motors can be operated simultancously or separately. That brings a greut convenience ta the user who can choose to start any number of motors so suit the occasion. The product is reasonably designed to save energy for household applications.
SPECIFICATION:
Model No. : 3238W
Voltage : 220V-240V 50/60 Hz
Power: 3600 W
Stainless tank capacity : 77 Lb
CAUTION:
- The voltage of the your power supply must be consistent with that specified in the instructions (as fig. 1)
- After cach use, hold the power plug and pull it out from the power socket. Do not use force on the cord (as fig. 2)
HOW TO REMOVE THE FILTER CARTRIDGE:
Note: filter cartridge also for wet use, please keep this filter
cartridge for wet and dry operation.
Push metal clip according to the arrow direction (as fig.3), then remove the
filter cartridge (as fig.4)
HOW TO USE THE ACCESSORIES:
-
Connection of suction coupler & hose
To use, insert the hose to the suction coupler tightly. To pull out, push the knob outward and pull out the hose. (as fig.5) -
Extension wand and nozzles
Insert the smaller end of an extension wand into the larger end of the other wand (as fig.6)
Note : filter cartridge also for wet use, please keep this filter cartridge for wet and dry operation. -
REPLACEMENT OF BRUSH & BLADE :
1. Rotate the holder by 90 degrees with clockwise direction ;
2. Pull out brush strip or rubber blade for replacement or cleaning. ;
3. Complete releasing brush strip and rubber blade. (fig. 7) BRUSH NOZZLE
It is applicable for cleaning floors and carpets.
SQUEEGEE NOZZLE
It is applicable for vacuuming water on the floor. ROUND BRUSH
It is applicable for table tops ; thresholds ; window ; curtains and air conditioner brackets.
CREVICE TOOL It is applicable for comers and narrow areas. -
HOW TO ASSEMBLE AND DISASSEMBLE FLEECE BAG :
ASSEMBLY : insert fleece bag into the suction coupler ( as below showing)
DISASSEMBLY : Remove fleece bag from suction coupler( as below showing).
HOW TO EMPTY THE TANK
When the tank is full, use the overturning mechanism to empty the tank. First,
remove the top head, take out the filter with frame (as fig.12), then unlock
the knob (as fig.13) and step foot on the trolley whilst holding the grip
handle with one hand and lifting the handle with the other hand (as fig.14) to
empty tank. Warning
Do not vacuum hot ash.
Extinguish heat before cleaning a grate of grid.
Do not immerse appliances in water or expose it to rain.
Do not stand top head in inclination position.
Do not vacuum inflammable or Combustible substances.
When disconnecting the powcr cable, do not pull on the cable only, hold the
plug to disconnect by hand.
Leave servicing to qualified technicians only.
MAINTENANCE AND SERVICING:
To dismantle, unclip both latches and remove top housing and Filter with
frame.
Replace the filter and top housing and fasten latches.
Wash filter cartridge and fabric filter with clean water after operation.
When fleece bag is full, please remove it out, then insert anew bag for next
use.
PS. fleece bag is for dry use, such as for collecting dust ; powder etc.,
please note.
REFER TO WATER LEVER SAFETY DEVICE
When the water level in the tank exceeds the safety level, the safety device
will automatically block the inict and motor turning sound will be changed,
but power will remain ON, please switch off the power before pouring out the
water in the tank.
REFER TO THE ACTION SOUND
This cleaner is designed with a powerful suction. Do not be alarmed if the
motor noise increases when performing tougher cleaning work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>