Honeywell FS20X Fixed Flame Detector User Guide

Honeywell FS20X Fixed Flame Detector

Product Information

Specifications

• Spectral Sensitivity :
  • FS24X Plus: 3IR
• Sensitivity (feet ):
  • FS24X Plus : 200
  • FS20X: 200
  • FS10 : 8
  • FS7 : 200
• Response Time :
  • FS24X Plus : 10 seconds
  • FS20X : 6 seconds
  • FS10 : 5 seconds
  • FS7 : 6 seconds
• Enclosures :
  • FS24X Plus : 2
  • FS20X : 3
  • FS10 : 4
  • FS7 : 6
• Field of View (Conical):
  • FS24X Plus: 5000
  • FS20X: 200
  • FS10 : 200
  • FS7 : 200
• Communication:
  • All models have standard communication options
• Certifications:
  • FS24X Plus : SIL Rating available on request
• Mounting Bracket :
  • All models have mounting brackets
• Conduit Entries :
  • All models have conduit entries
• Operating Temperature :
  • All models have standard operating temperature range
• Analog Output (4-20mA):
  • All models have analog output
• Relays :
  • All models have relays
• Diagnostics :
  • All models have diagnostic features
• Fault Event Logs :
  • All models have fault event logs
• FirePicsTM :
  • All models have FirePicsTM feature

Product Usage Instructions

Step 1 : Mounting the Flame Detector

To ensure proper installation, follow these steps:

1. Select a suitable location for mounting the flame detector based on the specific application and the detector’s field of view.
2. Use the provided mounting bracket to securely attach the flame detector to a stable surface.
3. Ensure that the conduit entries are properly aligned for easy wiring.

Step 2 : Wiring the Flame Detector

Follow these steps to wire the flame detector:

1. Connect the appropriate wires to the conduit entries of the flame detector.
2. Route the wires through the conduit to the control panel or monitoring system.
3. Make sure to follow the wiring diagram provided in the product manual for proper connections.

Step 3 : Setting up Communication

If required, set up communication between the flame detector and the control panel or monitoring system using the provided communication options.

Step 4 : Testing and Calibration

Before putting the flame detector into operation, it is important to perform testing and calibration:

1. Ensure that power is supplied to the flame detector.
2. Activate the test mode on the flame detector to simulate a fire event.
3. Observe the response of the flame detector and verify that it detects the simulated fire.
4. If necessary, adjust the sensitivity or other settings according to the product manual for optimal performance.

FAQ

Q: What is the spectral sensitivity of the FS24X Plus flame detector?

A : The FS24X Plus flame detector has a spectral sensitivity of 3IR, allowing it to respond to hydrocarbon and hydrogen fires.

Q: Can the FS Series detectors be used in offshore drilling platforms?

A : Yes, the FS Series detectors, including the FS24X Plus, are suitable for use in offshore drilling platforms.

Q: Do the FS Series detectors have diagnostic features?

A : Yes, all models in the FS Series have diagnostic features to help monitor the detector’s performance and detect any faults.

FLAME PRODUCT GUIDE

FS SERIES FLAME DETECTORS

QUICK REFERENCE

1. See product manual for full details
2. Standard option
3. SIL Rating : FMEDA available on request
4. Contact Honeywell for availability

INDUSTRIAL APPLICATIONS

FS24X PLUS

ADVANCED FLAME DETECTOR

Honeywell’s FS24X Plus 3IR flame detector responds to hydrocarbon and hydrogen fires in a solid field of view, providing fast and reliable protection against a wide range of fires.

Enhance your overall fire and gas safety by deploying reliable flame detection that can see through rain, fog and smoke better than other technologies. Designed for demanding industrial applications, the FS24X Plus helps businesses protect people, plants, and processes should a detectable fire occur.

FEATURES

• WideBand IR Technology
• Selectable detection sensitivities
• 90° cone of vision; 120° cone of vision (50% on axis range)
• Real-time clock for accurate time dating of events
• FirePic — pre-fire event data storage
• Event log with date and time stamp
• HART® and Modbus communication standard
• Sink, Source or Isolated 4-20 mA analog output
• Alarm, Fault and Auxiliary relays
• Automatic optical path and electronic self-test
• Wide operating temperature range
• Electronics module with components protection for easy plug-in terminations and field installation
• Two 3/4″ NPT or M25 conduit entries
• Aluminum or stainless steel housing
• FM, ATEX, CE mark approvals
• IEC61508 SIL 2 Certified
• FlameManager software for programming, diagnostics, and downloading of FirePics and event log

BENEFITS

• Delivers robust flame and fire protection
• Maintains coverage while operating in challenging, low-visibility conditions, due to it has advanced solid-state, wide-band sensors
• Uses advanced diagnostics, including window clarity, to maintain site protection
• Enables simple mechanical installation when combined with the included sunshade and SM4 mounting bracket (a marine-version mount is also available)
• Allows quick electrical installation, with its two cable inlets and plug in connections
• Quick and easy to set up with the included PC software
• Integrates easily into your systems because it has multiple userselectable outputs, including 4-20mA, Relays, HART® and Modbus
• Clearly communicates current status, even from a distance, with  a high-visibility LED HALO ring: Green (Normal), Yellow (Fault/ Warning) or Red (Alarm)
• Requires minimal maintenance for trouble-free operation: internal diagnostics and warnings drive maintenance; simple test lamp allows quick and easy testing at distance (no need to climb to the instrument); replaceable electro-optics modules enable convenient field replacement

MARINE CERTIFICATIONS

• ABS
• Lloyds
• BV
• DNV
• MED
• USCG

FS24X PLUS

FS24X PLUS 3IR FLAME DETECTOR

sunshade
FS24XP-SMGXM| 3IR – SS – M25 kit includes marine mount and sunshade

ACCESSORIES

universal charger
TL- 1055| Test lamp for FSX and FSX Plus, non-explosion proof, includes universal charger
FS24XP-NFPA-KIT| NFPA conversion kit (terminal blocks)
SH- 001| Stainless steel sunshade

SPARE PARTS

PART NUMBER / DESCRIPTION

• FS24XP-PUCK/ FS24X Plus – 3IR – Spare Puck Kit
• FSX-A006 /Replacement bulb for TL-1055 or TL-2055

FS20X

MULTI-SPECTRUM FLAME DETECTOR

The FS20X is part of the FSX family of advanced technology Electro-Optical Flame Detectors and is a quantum leap in integrating infrared and ultraviolet sensing technologies.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X is a multi-spectrum (UV/Dual IR/VIS) fire and flame detector with a proven UV solar-blind Sensor. The FS20X exhibits fast false-alarm-free response to fires over a wider temperature range and with long detection distance.

FEATURES

• WideBand IR Infrared combined with Ultraviolet
• Detection range greater than 200 feet to 1 square foot heptane fire
• Electronic Frequency Analysis
• Visible sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Solar blind 90° cone-of-vision
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic — up to 6 pre-fire event data storage
• Event log — up to 200 events with date and time stamp
• Built-in RS-485 Modbus Communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic Optical Path and Electronic Self-Test
• Wide operating temperature range
• Electronics Module for components  protection with plug-in terminations for easy field installation
• Two 3/4 inch NPT or 25 mm conduit entries
• FM, ATEX, CE mark approvals
• Meets SIL 2 requirements

BENEFITS

• Detects hydrocarbon and non‑hydrocarbon fuel fires in tough environmental conditions
• Minimal maintenance for trouble-free operation
• PC software and Interface Module (FSIM) for fault diagnostics real-time graphs (RTGs) and downloading of FirePics and event log
• Suitable for a wide variety of applications

FS20X SERIES

FS20X-211 SERIES, STANDARD TEMPERATURE RANGE -40° TO 85°C

3/4″ NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III
FS20X-211-22- 2| Dual IR/UV 316 stainless steel enclosure with (2) 3/4″ NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III
FS20X-211-23- 3| Dual IR/UV copper-free aluminum enclosure with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1
FS20X-211-24- 3| Dual IR/UV 316 stainless steel enclosure with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1
FS20X-211-21- 4| Dual IR/UV copper-free aluminum enclosure with (2) 3/4″ NPT entries, INMETRO
FS20X-211-22- 4| Dual IR/UV 316 stainless steel enclosure with (2) 3/4″ NPT entries, INMETRO
FS20X-211-23- 4| Dual IR/UV copper-free aluminum enclosure with (2) M25 entries, INMETRO
FS20X-211-24- 4| Dual IR/UV 316 stainless steel enclosure with (2) M25 entries, INMETRO

FS20X-212 SERIES W ITH HART®, STANDARD TEMPERATURE RANGE -40° TO 85°C

3/4″ entries, FM/cFM, HART® module factory installed
FS20X-212-22- 2| Dual IR/UV 316 stainless steel enclosure with (2) 3/4″ entries, FM/cFM, HART® module factory installed
FS20X-212-23- 3| Dual IR/UV copper-free aluminum enclosure with (2) M25 entries, ATEX/IECEx, HART® module factory installed
FS20X-212-24- 3| Dual IR/UV 316 stainless steel enclosure with (2) M25 entries, ATEX/IECEx, HART® module factory installed
FS20X-212-21- 4| Dual IR/UV copper-free aluminum enclosure with (2) 3/4″ NPT entries, INMETRO, HART® module factory installed
FS20X-212-22- 4| Dual IR/UV 316 stainless steel enclosure with (2) 3/4″ NPT entries, INMETRO, HART® module factory installed
FS20X-212-23- 4| Dual IR/UV copper-free aluminum enclosure with (2) M25 entries, INMETRO, HART® module factory installed

ACCESSORIES

international plugs
SH-001| Stainless Steel Sunshade
SM4| Stainless Steel Swivel Mounting Assembly
TL- 1055| Test lamp for FSX and FSX Plus, non-explosion proof, includes universal charger

TL-2055 Test lamp for FSX and FSX Plus, explosion proof, includes universal charger

REPLACEMENT DETECTOR MODULE

PART NUMBER DESCRIPTION

FS20X-211-10/ FS20X Replacement Detector Module
FS20X-212-10 /FS20X Replacement Detector Module with HART®

SPARE PARTS

FS10

MULTI-SPECTRUM FLAME DETECTOR

A high-speed microprocessor based fire detection and process control system specially designed for liquid and powder coating applications, the FS10 System quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds and effectively interrupts the fire before residues and wet paint films can ignite. The FS10 System, for liquid paint spray and electrostatic powder coating applications, is a two-stage response system: an Alert for spray gun “fireball” type of fires and a Fire Alarm in 4-5 seconds if the fire continues.

FEATURES

• Multi-spectral digital electro-optical infrared fire detector
• Meets requirements of NFPA 33
• Unique two-stage Alert and Fire Alarm response
• 90° field-of-view with a 15 ft. detection range
• Built-in automatic “through the lens” self-test
• Digital communications with RS-485 interface

BENEFITS

• Resistant to false alarms caused by arcs or corona discharges
• Not sensitive to background radiant energy sources such as paint heaters
• Not affected by absorbing smoke or paint solvent mist in liquid pant spray booths
• Sees through paint, powder or oil residue on the detector’s lens

CERTIFICATIONS

• Explosion-Proof; Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2, Groups E, F, & G, Class III
• FM

FS10 SYSTEMS

CARD CONTROLLER WITH FS10 ELECTRO-OPTICAL FLAME DETECTOR

Includes PC software and manual. Requires backplane card and 24 Vdc.

(2) fire signal relay levels
Option-2GF| 2GF system: general finishing applications with process control and fire alarm signal relays
Option-2WE| 2WE system: powder coating and paint spray line applications with (2) fire signal relay levels
Option- 2WL| 2WL system: paint spray line applications with (3) fire signal relay levels
Option-2GE| 2GE system: powder coating and paint spray line applications with (2) fire signal relay levels
BP- 1| Backplane for 1 card controller
BP- 2| Backplane for 2 card controller
BP-4-L9| Backplane for 4 card controller

SPARE PARTS – FS10 WALL MOUNT CONTROLLER & CARD CONTROLLER

relay levels
FS10-CARD-2GE| Powder coating and paint spray line applications with (2) fire signal relay levels
FS10-CARD-2GF| General finishing applications with process control and fire alarm signal relays
FS10-CARD-2WL| Paint spray line applications with (3) fire signal relay levels
FS10-DETECTOR| Model FS10 fire detector for use with wall mount controller or card controller
FS10-DET-MODULE| Replacement electronics module for fire detector for the above systems

DETECTOR CABLES – CARD CONTROLLER WITH FS10 ELECTRO-OPTICAL FLAME DETECTOR

PART NUMBER DESCRIPTION

CAB-50 50/ ft. card controller cable; connects fire detector to controller
CAB-100 /100 ft. card controller cable; connects fire detector to controller

FS10 STAND ALONE (UNITIZED)

Relay, 30 ft. sensitivity (latching alert and alarm relays)
FS10-R30-SS| 316 stainless steel housing includes Alert/Fire Early Warning Relay, 30 ft. sensitivity (latching alert and alarm relays)
FS10-R30-EC| Copper-free aluminum housing includes Alert/Fire Early Warning Relay, 30 ft. sensitivity (latching alert and alarm relays), normally energized with normally closed contacts
FS10-R45| Copper-free aluminum housing, 45 ft. sensitivity (latching alarm relays)
FS10-R45-SS| 316 stainless steel housing, 45 ft. sensitivity (latching alarm relays)
FS10-RN30| Copper-free aluminum housing includes Alert/Fire Early Warning Relay, 30 ft. sensitivity (non-latching alert and alarm relays)
FS10-RN30-SS| 316 stainless steel housing includes Alert/Fire Early Warning Relay, 30 ft. sensitivity (non-latching alert and alarm relays)
FS10-RN45| Copper-free aluminum housing, 45 ft. sensitivity (non- latching alarm relays)
FS10-RN45-SS| 316 stainless steel housing, 45 ft. sensitivity (non- latching alarm relays)

Includes Alarm and Fault relays, 24 Vdc input with temperature range -40°C to +85°C.
Approvals: FM; Class I, Div. 1 & 2; Groups B, C, & D; Class II, Div. 1 & 2; Groups E, F, G and Class III.

SPARE PARTS – FS10 STAND ALONE (UNITIZED)

alone fire detector (latching alert and alarm relays)
FS10-R30-EC- MOD| Replacement electronics module for Model FS10-R30 stand alone fire detector (latching alert and alarm relays), normally energized with normally closed contacts
FS10-R45-MOD| Replacement electronics module for Model FS10-R45 stand alone fire detector (latching alarm relay)
FS10-RN30-MOD| Replacement electronics module for Model FS10-RN30 stand alone fire detector (non-latching alert and alarm relays)
FS10-RN45-MOD| Replacement electronics module for Model FS10-RN45 stand alone fire detector (non-latching alarm relay)
Card Controller with FS10 Stand Alone (Unitized)
FS10R-GR-Kit| Stainless steel grill kit for FS10-R and FS10-CS Detectors (Killark housing) includes:

(1) SS grill, (2) SS brackets, and (2) SS screws

RS-232 Cable| RS232 computer cable for connection from FS7-130-SX, S7-2175, option-1 or option-2 controllers or interface box to PC
PSU-12| Universal charger for Test Lamps; for 110-240 VAC with international plugs

ACCESSORIES – FS10 STAND ALONE (UNITIZED)

protective covers on FS10 detectors
DPC-12| Disposable protective covers for use with FS10 only; keeps powder or paint off window lens of the FS10 fire detector; 12 per bag
DASA1- P| Air shield for powder applications protects FS10 fire detector window lens from powder build-up; supplied with fitting for 1/4″ tubing; can also be used with FS24X, FS20X
DASA6- N| Air shield for powder applications protects FS10 fire detector window lens from powder build-up; supplied with fitting for 6 mm tubing

FS7
MULTI-SPECTRUM FLAME DETECTOR

The FS7 provides a two-stage response to semiconductor wet bench fires: an Alert to a small fire with a 3 kW heat energy output and an Alarm if the fire grows to a 13 kW heat energy output.

The FS7 Flame Detector system first sends an Alert in response to a small fire (the equivalent of a 4-inch diameter polypropylene pool fire) which may self- extinguish. If the fire does not self-extinguish and grows to the factory mutual specified heat energythreshold of 13 kW (the equivalent of an 8-inch diameter polypropylene pool fire) then the second stage is activated and sends an Alarm in response.

The FS7-2173 is used with FS7-130-SX Controller which supplies power, monitors status and communicates with detectors via the digital RS-485 communication channel. FS7-2173 is supplied with a standard 20 ft. cable connector. Detectors are  connected to the controller using the self-locking connectors and junction boxes. This  allows for fast and easy connections and eliminates wiring problems. Each detector can store up to six time and date stamped FirePics (pre-event, multi-spectral sensor array data) in non-volatile memory. A controller can also store an event history table in the non-volatile memory which also contains the time and date stamped alert, alarm

FEATURES

• Multi-spectral digital electro-optical radiant energy infrared fire detector
• Unique two-stage fire detection response
• Rugged leak-proof, heat-sealed, acid-resistant, injection-molded polypropylene housing
• Wide 120° field-of-view
• Digital communication withRS-485 interface
• FirePic – time and date-stamped digital fire signatures
• Built-in detector automatic self-test
• Unitized model design for stand-alone operation

BENEFITS

• Resistant to false alarm sources
• Detects hydrocarbon and nonhydrocarbon fires
• Not affected by absorbing smoke, gasses or chemical vapors
• Not sensitive to background radiant energy from electric heaters and ovens

FS7
DETECTOR PARTS

relays.
FS7-2173-2RP-K| Kal-rez O-ring for use with non-latching Alert and Alarm relays
FS7-2173-KALO| Kal-rez O-ring for use with FS7-130-SX Controller

CONTROLLER SYSTEMS

PART NUMBER/ DESCRIPTION

• FS7-130-SX
  • Multi-zone Compact Controller designed for fire panels installation; monitors up to (12) Model FS7-2173 detectors; programmable up to 4 zones with relay outputs for Alert and Alarm; requires 24 VDC; FM and CSFM approvals

ACCESSORIES

• PART NUMBER / DESCRIPTION
  • FT-S7
• Test lamp, battery operated for testing FS10 and FS7
  • FS7-2179
• Junction box for connecting Model FS7-2173 fire detectors in a daisy chain or star configuration; includes (4) Lemo female connectors; required for Model FS7-130-SX applications

INTERCONNECTION CABLES

Junction box)
CBMM-10| 10 ft. cable with Male/Male Lemo connectors (Junction box to Junction box)
CBMO-20| 20 ft. cable with Male Lemo connector/open pigtail (Junction box to Model FS7-130-SX Controller or Model S7-2175 Control Panel)
CBMO-50| 50 ft. cable with Male Lemo connector/open pigtail (Junction Box to Model FS7-130-SX Controller or Model S7-2175 Control Panel)

SPARE PARTS

PART NUMBER / DESCRIPTION

• PSU-12
  • Universal charger for test lamps; for 110-240 VAC with international plugs
• PW-3123-0002
  • Replacement battery for FT-S7 Tester

QUICK REFERENCE

1. See product manual for full details

COMMERCIAL APPLICATIONS

Key :

• Not recommended
• Suitable (pending end-user review)
• Recommended

FSL100 SERIES

FLAME DETECTOR

The FSL100 Series utilizes sophisticated sensing and signal analysis to detect fires quickly while also rejecting false alarms. FSL100 products may be small and lightweight for easy installation but they are designed to work in tough environments both indoors and outdoors. With a large field of view, they can detect a range of different types of fires including hydrocarbon and non hydrocarbon.

The FSL100 series consists of UV, UV/IR and IR3 flame detectors and is the latest generation of mid-market flame detectors from Honeywell.

UV (ULTRAVIOLET) FLAME DETECTOR

For more information
sps.honeywell.com

HART is a registered trademark of FieldComm Group, Inc. HIS-CT- FlamePrdctGuide-EN-LTR-2V0-16may2023 © 2023 Honeywell International Inc.

References

• Safety and Productivity Solutions | Honeywell

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>