nVent 1244-004251 Float Assembly Fast Fuel Sensor Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent 1244-004251 Float Assembly Fast Fuel Sensor
Product Information
Float Assembly Fast Fuel Sensor Features
- Simple and fast to install
- Small and lightweight
- Durable: made of 306 stainless steel
The nVent RAYCHEM TraceTek TT-FFS-FLOAT is a stainless steel float assembly designed for use with the nVent RAYCHEM TraceTek TT-FFS-WR Fast Fuel Sensors. This float assembly ensures that the Fast Fuel Sensor remains positioned at the water surface or at the bottom of the pit in the absence of water. It is available in 1 or 2-meter lengths.
| Specifications Catalog Number | Item Name | Material |
|---|---|---|
| 1244-004251 | TT-FFS-FLOAT-1M | Stainless Steel |
| 1244-004252 | TT-FFS-FLOAT-2M | Stainless Steel |
Warning nVent products should only be installed and used according to nVent’s product instruction sheets and training materials. Instruction sheets can be found at www.nvent.com or obtained from your nVent customer service representative. Failure to properly install, misuse, misapplication, or disregard of nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, death, and/or voiding of your warranty. Contact Information North America
- Tel : +1.800.545.6258
- Fax: +1.800.527.5703
- Email: thermal.info@nvent.com
Europe, the Middle East, and Africa
- Tel: +32.16.213.511
- Fax: +32.16.213.604
- Email: thermal.info@nvent.com
Asia Pacific
- Tel: +86.21.2412.1688
- Fax: +86.21.5426.3167
- Email : cn.thermal.info@nvent.com
Latin America
- Tel: +1.713.868.4800
- Fax: +1.713.868.2333
- Email : thermal.info@nvent.com
Brands Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer All trademarks and registered trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Installation
- Ensure that you have the correct float assembly for your application (1M or 2M).
- Position the float assembly at the desired location in the pit or water surface.
- Securely attach the float assembly using the appropriate mounting hardware.
- Connect the nVent RAYCHEM TraceTek TT-FFS-WR Fast Fuel Sensor to the float assembly according to the sensor’s instruction manual.
- Refer to the sensor’s instruction manual for further setup and configuration.
Maintenance To ensure the proper functioning of the float assembly and Fast Fuel Sensor, perform the following maintenance tasks regularly:
- Inspect the float assembly for any signs of damage or corrosion. Replace if necessary.
- Clean the float assembly and sensor using a mild detergent solution and a soft cloth.
- Check all connections for tightness and secure any loose fittings.
- Test the Fast Fuel Sensor according to its instruction manual to verify accurate readings.
Troubleshooting If you encounter any issues with the float assembly or Fast Fuel Sensor, refer to the troubleshooting section of the sensor’s instruction manual. If the problem persists, contact nVent customer service for further assistance.
FAQ
- Q: What are the available lengths for the float assembly?
- A: The float assembly is available in 1-meter and 2-meter lengths.
- Q: How do I secure the float assembly in the pit?
- A: Use appropriate mounting hardware to securely attach the float assembly to the desired location in the pit or water surface.
- Q: Can I use the float assembly without water present in the pit?
- A: Yes, the float assembly can keep the Fast Fuel Sensor positioned at the bottom of the pit even if no water is present.
nVent RAYCHEM TraceTek TT-FFS-FLOAT is a stainless steel float assembly for use with nVent RAYCHEM TraceTek TT-FFS-WR Fast Fuel Sensors. The float assembly keeps the Fast Fuel Sensor positioned at the water surface, or at the bottom of the pit if no water is present. Available in 1 or 2 m lengths.
FEATURES
Simple and fast to install: small, lightweight
- Durable: 306 stainless steel
SPECIFICATIONS
| Catalog Number | Item Name | Material |
|---|---|---|
| 1244-004251 | TT-FFS-FLOAT-1M | Stainless Steel |
| 1244-004252 | TT-FFS-FLOAT-2M | Stainless Steel |
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void of your warranty
contact
North America
- Tel +1.800.545.6258
- Fax +1.800.527.5703
- thermal.info@nvent.com
Europe, the Middle East, Africa
- Tel +32.16.213.511
- Fax +32.16.213.604
- thermal.info@nvent.com
Asia Pacific
- Tel +86.21.2412.1688
- Fax +86.21.5426.3167
- cn.thermal.info@nvent.com
Latin America
- Tel +1.713.868.4800
- Fax +1.713.868.2333
- thermal.info@nvent.com
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>