nVent RBVA9060F LENTON Vertical Pouring Basin Extended Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent RBVA9060F LENTON Vertical Pouring Basin Extended
Product Information
Specifications
- Material : Graphite
- Diameter : 64 mm
- Length 2: 38 mm
- Length 1: 229 mm
- Width : 76 mm
- Height 2: 76 mm
- Height 1: 152 mm
- Unit Weight : 4.760 kg
Product Usage Instructions
Step 1: Preparing for Use
Before using the extended vertical pouring basin, ensure that you have the
following:
- T-Series or B-Series vertical sleeve
- nVent product instruction sheets (available at www.nvent.com or from your nVent customer service representative)
Step 2: Installation
Follow these steps to install the extended vertical pouring basin:
- Identify the tap hole in the sleeve where interferences of the structure are present.
- Place the extended vertical pouring basin directly next to the tap hole.
- Ensure that the basin is securely positioned and aligned with the tap hole.
Step 3: Usage
Once the extended vertical pouring basin is properly installed, follow
these guidelines for usage:
- Pour the desired material into the basin slowly and carefully.
- Avoid overfilling the basin to prevent spillage.
- Allow sufficient time for the material to settle and solidify before removing the basin.
- Follow any additional instructions provided in the nVent product instruction sheets.
FAQ
Q: Can I reuse the extended vertical pouring basin?
A: Yes, the extended vertical pouring basin is designed to be durable, re-
usable, and long-lasting. Ensure proper cleaning and maintenance between uses.
Q: Are there any safety precautions I should be aware of?
A: Yes, please adhere to the following safety precautions:
- Always refer to the nVent product instruction sheets and training materials for proper installation and usage.
- Misuse or misapplication of the product may cause product malfunction, property damage, serious bodily injury, or death.
- Voiding your warranty may occur if nVent’s instructions and warnings are not followed completely.
CATALOG NUMBER
RBVA9060F
Extended vertical pouring basins are used when interferences of the structure are directly next to the tap hole in the sleeve.
FEATURES
- Made from heat-resistant graphite
- Durable, re-usable and long lasting
- Designed for use with T-Series and B-Series vertical sleeves
PRODUCT ATTRIBUTES
- Material : Graphite
- Diameter : 64 mm
- Length 2: 38 mm
- Length 1: 229 mm
- Width : 76 mm
- Height 2: 76 mm
- Height 1: 152 mm
- Unit Weight : 4.760 kg
ADDITIONAL PRODUCT DETAILS
RBVA pouring basins require one RBM2660DC pouring basin frame and one
RBS5000 bolt retainer. RBVB pouring basins require one RBM2660TC pouring basin
frame and one RBS5000 bolt retainer (all sold separately). Prior to
installation, please read and understand all of the detailed instructions and
safety notices provided in the nVent LENTON Cadweld Rebar Splicing System
Instruction Manual. Sizes not shown may be available by special order. Contact
your nVent LENTON representative for more information.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
Customer Support
North America
+1.800.753.9221
- Option 1 Customer Care
- Option 2 Technical Support
Europe
-
Netherlands:
+31 800-0200135 -
France:
+33 800 901 793
Europe
-
Germany:
800 1890272 -
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>