LINE 6 POD Go Wireless Guitar Multi Effects Processor Owner’s Manual
- June 16, 2024
- Line 6
Table of Contents
LINE 6 POD Go Wireless Guitar Multi Effects Processor
Product Information
Specifications
- Model: POD Go
- Firmware Version: 2.65
- Display: Colored LC-display
- Inputs: Guitar In, Relay G10T Charger
- Outputs: Main Out, Amp Out, Phones, USB
Product Usage Instructions
Getting Started
To get started with the POD Go, follow these steps:
- Download the latest version of POD Go Edit from line6.com/software.
- Connect your guitar to the Guitar In input.
- If using the POD Go in a studio setup, connect the Main Out to your audio interface via USB.
- If using the POD Go in a live setup, connect the Main Out to your amplifier or PA system.
- If using the POD Go with external pedals, connect them to the FX Loop Send and Return jacks.
- Power on the POD Go by pressing the POWER switch.
Navigating the Interface
The POD Go features a colored LC-display and various control buttons. Here’s an overview of the interface:
- VIEW: Use this button to switch between different pages and modes.
- ACTION: Use this button to perform various actions and settings.
- MODE: Use this button to switch between different modes and functions.
- TAP: Use this button to set the tempo for time-based effects.
- TUNER: Use this button to access the built-in tuner.
Using Effects and Presets
The POD Go offers a wide range of effects and presets. To use them:
- Press the VIEW button to navigate to the desired page.
- Use the knobs and buttons to adjust the parameters of the selected effect.
- Save your settings as a preset by following the instructions in the user manual.
Working with Snapshots
The POD Go allows you to create and save snapshots, which are different
settings within a preset. Here’s how to work with snapshots:
- Navigate to the Snapshots page using the VIEW button.
- Select a snapshot slot.
- Adjust the settings for the selected snapshot.
- Save the snapshot by following the instructions in the user manual.
FAQ
Q: What is the difference between POD Go and POD Go Wireless?
A: The POD Go Wireless includes a built-in wireless receiver, allowing you
to connect your guitar wirelessly to the device.
Q: How do I update the POD Go firmware?
A: To update the firmware, download the latest version of POD Go Edit from
line6.com/software and follow the instructions provided in the user manual.
Q: Can I use external pedals with the POD Go?
A: Yes, you can connect external pedals to the FX Loop Send and Return
jacks on the POD Go.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>