Lazerbuilt 5060777101114 True Wireless Earbuds User Guide
- June 16, 2024
- lazerbuilt
Table of Contents
- Lazerbuilt 5060777101114 True Wireless Earbuds
- Product Information
- Product Usage Instructions
- IN THE BOX
- CHARGING
- POWER
- ASSISTANT MODE
- BLUETOOTH PAIRING
- AUDIO
- CALL
- Safety instructions
- Care and maintenance
- Warranty Disclaimer
- Note on environmental protection
- Technical Data
- Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Lazerbuilt 5060777101114 True Wireless Earbuds
Product Information
Specifications
- Product Name: True Wireless Earphones
- Included in the Box:
- 2 x True wireless earphones
- 1 x Charging case
- 1 x User Guide
- 1 x USB charging cable
- Support Website: www.lazerbuilt.co.uk
- Tel. no: +44 1438 743753
- E-mail: enquiries@lazerbuilt.co.uk
Product Usage Instructions
Charging
The rechargeable battery in the unit is not fully charged initially, so it is
recommended to charge the battery before using.
Process:
- Place the earphones back into the charging case.
- Connect the charging case to a power source using the provided USB charging cable.
- The LED status on the charging case will blink in red to indicate that the earphones are charging.
- Once fully charged, the LED status on the charging case will light up in red.
Power On/Off
To power on the earphones, follow one of the methods below:
Method 1:
- Ensure the charging case is closed.
- The earphones will automatically power on and be ready to pair.
Method 2:
- Press and hold the power button on one of the earphones for 4 seconds.
- The earphones will power on and be ready to pair.
To power off the earphones, follow one of the methods below:
Method 1:
- Ensure the charging case is closed.
- The earphones will automatically power off.
Method 2:
- Press and hold the power button on one of the earphones for 6 seconds.
- The earphones will power off.
Pairing
The earphones will automatically search and connect to the previously paired
Bluetooth device when powered on.
Audio Controls
Use the following tips on the earphones to control audio playback:
Left Earphone:
- Tap x2: Previous track
- Tap x3: Volume down
Right Earphone:
- Tap x1: Play/Pause
- Tap x2: Next track
- Tap x3: Volume up
FAQ
-
Q: How do I charge the earphones?
A: To charge the earphones, place them back into the charging case and connect the case to a power source using the provided USB charging cable. -
Q: How do I power on/off the earphones?
A: To power on the earphones, ensure the charging case is closed. To power off the earphones, either ensure the charging case is closed or press and hold the power button on one of the earphones for the specified duration. -
Q: How do I control audio playback?
A: Use the specified taps on the left and right earphones to control audio playback, including play/pause, next/previous track, and volume adjustment.
IN THE BOX
CHARGING
The rechargeable battery (installed in the unit) is not fully charged initially, charge the battery before using.
Process| Led Status (charging case)| Led Status
(earphones)
---|---|---
Charging| Blink in red| Lights up in red
Fully Charged| Lights up in red| Light off
Pairing| Light off| Blink in red and blue
Paired| Light off| Light off
During the call| Light off| Light off
POWER
ASSISTANT MODE
BLUETOOTH PAIRING
When the headphone is switched On, it will search and connect automatically to the previously paired Bluetooth device.
AUDIO
CALL
Please read thoroughly the following instructions and information:
- Not suitable for children aged 6 and under.
- To prevent any loss of hearing, avoid listening at loud volumes for prolonged periods.
- Always keep the volume at a sensible level.
- Extended listening may negatively impact hearing.
- Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.
- There is a risk of suffocation from swallowing small parts.
Safety instructions
- The product is intended for private, non-commercial use only.
- Use the product only for the intended purpose.
- Do not use the product in areas in which electronics products are not permitted.
- Do not attempt to service or repair the product yourself.
- Do not disassemble the product or continue to operate it if it becomes damaged.
- Avoid dropping or crushing the product
- Dispose of packaging material immediately per the locally applicable regulations.
- Do not modify the product in any way which voids the warranty.
- Make sure that no liquids of any kind penetrate the headphones.
- Avoid extreme heat, cold and humidity.
- While driving a car or using sports equipment, do not allow yourself to be distracted by your product and keep an eye on the traffic situation and your surroundings.
Care and maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
Warranty Disclaimer
- Lazerbuilt Ltd. Assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the operation instructions and/or safety notes.
- Lazerbuilt cares for our kids and our planet. Please take care when disposing of your products after they have reached the end of their lifecycle.
Note on environmental protection
Following the implementation of European Directive 2012/19/EU and 2006/66/EU into the national legal systems, the following applies: Electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Details information on this topic is defined in the national laws of the respective country. This presence of the above symbol on the product, operation instructions or package indicates that the product is subjected to these regulations. By recycling, reusing the materials or other forms of utilising old/devices/batteries, you are making an important contribution to protecting our environment.
Technical Data
- Input: DC 5V
- BLUETOOTH V5.0
- TRANSMISSION RANGE UP TO 10 METERS
- FREQUENCY: 20 – 20,000HZ
- IMPEDANCE: 32 OHMS
- SENSITIVITY: 106±3dB
Support
- Website: www.lazerbuilt.co.uk
- Tel. no: +44 1438 743753
- E-mail: enquiries@lazerbuilt.co.uk.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>