rizoma TF085 Tank Fuel Cap Street User Manual

: June 4, 2024
: rizoma

Table of Contents

TF085 Tank Fuel Cap Street
OPEN FUEL CAP
DISASSEMBLE ORIGINAL CAP
INSTALL ORIGINAL BREATHER RUBBER
INSTALL ORIGINAL GASKET
INSTALL SPACERS
Documents / Resources

User Manual
Rev.: 00

TF085 Tank Fuel Cap Street

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide will allow you to mount and use the product correctly and enjoy all the features it has.
For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair, or maintenance, can cause accidents. Keep this user guide as a reference for the future.

** Attention:** This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are
leaking, bent, deformed, cracked, chipped, or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case, never try to repair or modify the Rizoma products or their components, always replace them with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your, safety Rizoma suggests always contact
your RIZOMA dealer.
O.E.M.: original equipment manufacturer.

PART NUMBER
TF085

Working on the fuel system observe the instructions of the manufacturer and is strictly forbidden smoking, light open, and creating sparks. Ensure adequate ventilation also applies specific security policies for the country.
Fuel and fuel vapors are easily ignited.

4mm	4mm
DIFFICULTY LEVEL	Medium
TIME OF ASSEMBLAGE	15-20 min

OPEN FUEL CAP

DISASSEMBLE ORIGINAL CAP

INSTALL ORIGINAL BREATHER RUBBER

INSTALL ORIGINAL GASKET

NSTALL INCLUDED RUBBER

INSTALL SPACERS

NSTALL FUEL CAP

TIGHTENING SCREWS

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based on contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full-finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Legal note
Some of our products may not be approved for road circulation in the countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its products.