Usparkle 133B02 2K 17.3 Inch Portable Monitor User Manual

Portable Monitor User Manual
17.3 lnch

In order to ensure your safe use of this product, please read this manual carefully before using this product and keep it properly.

133B02 2K 17.3 Inch Portable Monitor

WARNING

Please read the user manual in the product packaging carefully before using the device.
This product has been designed with personal considerations n mind, but incorrect use may cause electric shock and fire. To avoid damaging the safety parts inside the machine, please observe the following rules during the nstallation, use and repairing:

1. To prevent from fire disaster or electronic shock, please do not put the monitor n humidity or even in a worse condition;
2.  Before using the device, make sure all cables are connected properly and the power cord s not damaged, if there s any damage, please contact us mmediately
3. To avoid dust, moisture and extreme temperatures, please Don’t place the device n any Damp area. Please place the device on a stable surface when n use;
4. Don’t put any object or splash any liquid nto the openings of the device casing;
5. Please use the power cord provided with the machine, and f you use other power cord, which is notprovided by the Seller, or the power cord with the device is damaged, please contact our profession! After-Service Team mmediately we will provide you the best solut on n 12 hours; This Tip s very mportant when you use the Monitor.
6. Please use a PD 20W Adapter to supply power for the display. The Mobile Phone Charger and Power Bank that meet power supply demand can also supply power for the display. If you are not sure thepower supply types, please contact our profession! After-Service Team mmediately, we will provide you the best solution n 12 hours;
7. Do not attempt to open the rear case of the device. There are no spare parts n the device that the customers can use to repair. If any abnormality occurs, please contact our profession!
   After-Service Team mmediately, we will provide you the best solution n 12 hours;

To avoid Personal injury, please observe the following rules:

1. Do not place the monitor on a sloping table unless there are security measures;
2. Do not drop or throw objects or toys onto the screen, because it will result in personal njury, product and the screen damage;

To prevent other injuries, please observe the following rules:

1. Please turn off the monitor when you leave for a long time;
2. Do not allow Children to throw or nsert objects nto the monitor;
3. Do not install spare parts that are not specifically designed for this device;
4. Please Unplug the power cord when the device s unattended for a long t me.
5. Do not touch the power cord or signal cable when lightning strikes, otherwise it may cause electr c shock;
6. Do not let any object compress or wrap the power cord;
7. Do not place the monitor where the power cord can be easily damaged.

To prevent the machine damage, the following situations should be avoided:

1. Place the monitor where it s easy to fall;
2. Place the display near a radiator or heat source;

Do not rub the screen with a hard ob ect as t will scratch or permanently damage the screen.
Do not use your fingers to press the screen for a long time. otherwise it will produce screen smear. and even a screen damage.
Red. green, and blue pixel defects may appear on the screen, but t does not affect the display function.
The power cord is the main solation device and must be put in an Easy-to- operate place.
If possible, try to use the recommended resolution for best results. Because f you use other resolution other than the recommended resolution.a screen abnormality may occur. But this s a feature of a LCD panel with the fixed resolution.
A still picture on the screen for a ong t me will cause damage to the screen and produce afterimages. Please make sure to use the screen saver, the afterimage and related issues are not covered n the scope of product repair ng warranty.
If you encounter any technical problems while using this device, please contact our profession I After-Service
Team mmediately on Page 16, we will provide you the best solution in 12 Hours

HOLO WAY

Slim Monitor Design, please Take Care when Holdling.

  Function of main accessories

If there are any missing parts, please contact us and we will resend to you soon.

Interface function introduction

A. Exi/Power·
Press once for exit current menu setting; press for 3 seconds for turn on or turn off the monitor.
B. Scroll wheel:
Scroll up the wheel, “Volume” will show up and then scroll up and down to ncrease or decrease the volume. Scroll down the wheel, “Br ghtness” will show up and then scroll up and down to increase or decrease the brightness. Press the wheel, ‘Menu’ will show up.
C. Audio Output:
3.5mm audio output. Connect external speakers, headphones or digital audio.
D. Mini HDMI:
Vdeo signal transmission
E. USB Type C:
Power/signal transmission from thunderbolt3 PC or USB3.1 phone
F. LED Indicator:
When connected with power and signal, this LED will be blue.
G. USB Type C:
Power/signal transmission from thunderbolt3 PC or USB3.1 phone

H. OTG:
The specially configured Micro USB is used as an OTG function to connect the mouse or keyboard. You can use an OTG converter (not ncluded) to connect this monitor to your mouse or keyboard.
I. VESA Installation:
Built-in VESA (75x75mm), can be mounted on the wall or desktop.
J. Dual Speakers
Built-in two speakers, it can offer three-dimensional sound.

Product Parameters

( full funct on, power or signal transmission from thunderbo t3 PC or USB3.1 phone )
Output Interface| 3.5mm headphone nterface
Refresh Rate| 60 Hz

Installing the stand case

Step1: Place the holster as shown above, part “1″is magnetic, length is about 6.7 inch.
Note: Inside is the diamond texture.

Step2: Place the monitor as shown above, part “1″can be sticky.

Step3:Stick the Leather cases “1“part to monitor “1″part,

Step4:Fold 2 over 1.

Step5:Stand up the monitor and adjust the angle

OSD Menu introduction

ON-SCREEN DISPLAY MENU INTRODUCTION

Function introduction

1. Connect to computer with Type-C nterface which supports Thunderbolt3 interface

PC which supports Thunderbolts 3:
Macbook 12″, Macbook 13″ 2017, MacbookPro 2016/2017/2018, New Macbook Air 2018, Pad Pro 2018 ChromeBook, P xe s, PielBook Pen, MagicBook, YogoC930, Yogo 5 Pro, Yogo 6 Pro, ThinkPad XI Carbon2017, Miix 720, Legion Y7000/Y7000P/Y7000K, XPS 13, XPS 15, G3/G5/G7, lnspiron 5000/7000, Pav lion X2, EliteBook Folio G1, EliteBook 1050, G1 Microsoft Surface Book2, Matebook D, Matebook X, Matebook X Pro, Matebook E, Matebook 13 , Cont nuous update …

Note: Please check the Type C port of your PC/Laptop whether supports audio and video signal transmission(Thunderbolt3 ). f t is just a Type C for charging, you need a adapter”Type C to HDMI” for signal transmission.

1. External power s required if power s insufficient it requires PD 20W or above.
2. Please use original cable and PD 20W or above adapter.
3. When “No signal”or “Power saving mode”appears, please change the type-c cable head to another side and connect to monitor again.

2. Connect mobile phone supporting USB3.1 Protocol with Type-C output function

Mobile Phone which supports USB 3.1:
58, S8+, 59, S9+, 510, 510+, S10e, Note8, Note9, Mate10, Mate10 Pro, Mate20, Mate20 Pro, Mate 20X, Mate P20, Mate P20 Pro, HonorNot10, Mate P30, Mate P30 Pro, Continuous update …
Note: Please check the Type C port of your Mobile Phone whether supports audio and video signal transmission( USB 3.1 ). If NOT SUPPORTS, it s just a Type C for charging, You need a adapter “1-0-S/Android to HDTV cable”for signal transmission.

1. External power s required if power s insufficient t requires PD 20W or above.
2. Please use original cable and PD 20W or above adapter.
3. When “No signal”or “Power saving mode”appears, please change the type-c cable head to another side and connect to monitor again.

3. Connect to Nintendo Switch (connected to Gaming Devices without touch function)

4. Connect to computer with HDMI interface Video/Audio signal

The monitor has a Mini HDMI nterface and s compatible with most HDMI devices and we do offer one Standard HDMI to Mini HDMI cable. When connecting a computer to the Mini HDMI, you need to connect the Mini HDMI cable f rstly, and then connect the USB to Type-C cable (some computer USB ports may suffer from a power shortage and require an external power supply).

Note:

1. External power is required f power s nsufficient t requires PD 20W or above.
2. When connecting to HDMI device, you need to connect the HDMI cable firstly, and then connect the USB to Type-C cable.

5. Connect more HDMI devices

Operation Notes:

1. Please operate the display by using the original accessories n the package.
2. When an external HDMI cable s connected, please connect the power supply firstly, and then connect HDMI to ensure the signal transmitted smoothly.
3. When the single-line connection to the Type-C interface, the screen will flash, and under voltage will result in Black screen, so please make sure to connect the PD 20W power supply.
4. When connected with a Windows 10 system computer, f the screen displays abnormally,

FAQ and Solution

Q: Does this display feature touch function?

A: No, this 17.3

Q: Can iPhone and Pad be directly connected to the display?

A: No, you need to purchase and use a lightning to hdmi adapter.

Q: My phone is a Google brand, but I cannot connect it directly to the display?

A: Some Google phones cannot be connected directly to the display. The mobile phone interface needs to support USB3.1 in order to connect directly to the display. Please confirm if your mobile phone supports t.

A: CD The computer nterface needs to support Thunderbolt 3. Please confirm whether your computer supports Thunderbolt 3. ® Please check whether the connection method is wrong. ® You need to connect the monitor with the other side of the type c cable @ If you have other equipment at home, you can try another device. @ If the above operation still can not solve the problem, please tell us, we will give you the perfect solution within 12 hours.

Q: My camera and monitor are used together, but there is no display. What can I do?

A: CD Not all cameras can be directly connected to the monitor, t is determined by the camera model. ® Please tell us your camera model and interface, we will help you solve it within 12 hours.

Q: The monitor flickers and keeps switching on and off. How to solve it?

A: (!)This phenomenon s nsuffcient power supply to the monitor. Please connect an external monitor power supply to solve this problem. ® If the above operation still can not solve the problem, please tell us, we will give you the perfect solution within 12 hours.

Q: How to solve the abnormal display of the monitor?

A: This phenomenon may be caused by interference from other devices, or it may be a problem with your device. CD If there is interference from other devices, you can temporarily remove t. ® If you have other computer equipment at home, you can try to connect with another device. ® If the situation s still the same, please tell us, we will give you the perfect solution within 12 hours.

Q: Is there anyway to save the settings on this monitor?

If you have any other questions, please let us know. Your question is very important to us. We will give you the perfect solution within 12 hours, and your questions can help us to perfect every detail. Will help us do better and better, thank you very much!

Warranty Card

Dear Customer,
Thank you for purchasing from us!
We offer 100% money back guarantee n 30 days and replacement n 90 days, lifetime warranty for any ssue, professional tech support to ensure no-worry service.
Any query or problem, please contact us :
US: [email protected]
EU: [email protected]
JP: [email protected]
We will reply to you within 12 hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>