SIKO SATB094 Smart Toilet Instruction Manual

SIKO SATB094 Smart Toilet

Specifications

• Product Name: SATB094 Smart Toilet
• Product Type: Electric Toilet

Safety Precautions

To avoid damage to property or personal injury, please strictly follow the safety warnings and guidelines listed below:

• Please ensure to carefully read through the user manual before assembly and strictly follow the instructions.
• Do not continue using the product if it experiences any breakdown, such as abnormal heating, smoking, abnormal sound or smell, leakage, breaking, or damage.
• Using non-neutral cleaning agents like banana water, gasoline, putty powder, nylon brush, or other substances on the plastic parts of the toilet seat cover may cause chemical reactions, leakage, and product damage.
• Avoid loosening the electric outlet or touching it with wet hands to prevent electric shock or fire.
• Do not touch the electric plug during thunderstorms to avoid electric shock.
• Do not use excessive load on the electric outlet and avoid using other electrical resources simultaneously to prevent overheating and fire hazards.
• Avoid spilling detergent, water, wash detergent, or urine into the body or electric outlet to prevent electric shock or fire.
• Do not allow children to stand on or put heavy objects on the seat and cover, toilet pan, or seat body. Heavy hitting or knocking is also not allowed.
• Do not attempt to disassemble or repair the product. If repairs are necessary, seek professional assistance to prevent further damage.
• Do not damage the electric plug or electric line. If they are damaged, do not use them and have them replaced by a professional to avoid short-circuits, electric shock, or fire hazards.
• Keep the stove or lit cigarettes away from the toilet pan, and do not throw cigarette butts into the toilet pan.

Product Usage Instructions

Before using the SATB094 Smart Toilet, please ensure that you have read and understood the safety precautions mentioned above.

Installation

Please follow the user manual provided with the product for detailed installation instructions. Make sure to install the toilet in a well- ventilated area and avoid areas with high humidity or water splashing, as this may cause electric shock or fire hazards.

Operation

To use the SATB094 Smart Toilet:

1. 1. Ensure that the toilet is connected to a power source.

2. Take a seat on the toilet.
3. Use the control panel or remote control to select the desired functions, such as flushing, bidet cleaning, air drying, or seat heating.
4. Adjust the settings according to your preference using the control panel or remote control.
5. After use, press the appropriate buttons to flush, clean, and dry.
6. Follow the cleaning instructions provided in the user manual to maintain the toilet’s hygiene.

Frequently Asked Questions (FAQ)

• Q: Can I use any cleaning agents on the plastic parts of the toilet seat cover?
• A: No, it is not recommended to use non-neutral cleaning agents like banana water, gasoline, putty powder, nylon brush, or other substances on the plastic parts. This may cause chemical reactions, leakage, and product damage. Please refer to the cleaning instructions provided in the user manual for suitable cleaning agents.
• Q : Can I repair the product myself if it breaks down?
• A : No, it is not recommended to disassemble or repair the product yourself. If repairs are necessary, please seek professional assistance to prevent further damage and ensure proper functioning.
• Q: Can I use the toilet in a shower room?
• A: Yes, you can use the toilet in a shower room. However, it is important to install air exchange equipment to ensure proper ventilation and drying in the shower room. Additionally, avoid installing the toilet in areas that are easily exposed to high humidity or water splashing, as this may cause electric shock or fire hazards.

Safety precautions

To avoid the damage to property or personal injury， please strictly follow up on the safety warming and noting list. Please ensure to carefully read through the user manual before the assembly, and strictly follow up the user manual to do the assembly, please keep the user manual after reading.

The sign and its implication

damage.

The following signs are used to indicate important safety precautions when using the product.

| It means not allowed, or forbidden.
---|---
| It means the contents that must be obeyed.

• Due to the continuous improvement of our products, we reserve the right of final interpretation of product changes.

WARNING

Prohibited

| It is not allowed to continue using if the product has some breakdown Breakdown: The product heats abnormally

Product has smoking

The product has abnormal sound and smell Product has leakage, breaking, or damage Toilet pan is blocked, etc.

When the breakdown happens, if it is not handled in time and continues use, it might trigger problems like electric shock, injury, firing or water penetration inside the room, etc.

Banana water, gasoline, putty-powder, nylon brush or other (non-neutral) mundificant is not allowed to clean the plastic parts like toilet seat cover, otherwise, it might trigger chemical reactions or leakage, damage the product

and cause people injury.

Loosening an electric outlet is not allowed as it might trigger electric shock or firing.
It is not allowed to pull out and plug in the electric plug by wet hand as it

might trigger electric shock or firing.

It is not allowed to touch the electric plug when it is thundering and lighting

as it might trigger electric shock.

It is not allowed to use other electric resources, the load of using an electric outlet could not be too big, as it might trigger firing due to over- heat.
Detergent, water, wash detergent or urine is not allowed to spot into body

and electric outlet, as it might trigger electric shock or firing.

It is not allowed to let child stand or put heavy goods on the seat and

cover, toilet pan, or seat body, heavy hitting or knocking is not allowed.

It is not allowed to disassemble, or repair this product, (it must go for professional repair person service if it is necessary to repair), otherwise, it might cause damage to this product.
WARNING

Prohibited

| Do not randomly damage the electric plug and electric line, if the electric line, or electric plug is damaged, please do not use it any longer or change by one self, it must be changed by a professional person, otherwise, it might trigger

short-circuit, electric shock, firing.

The stove or lighted cigarette is not allowed to be placed next to the toilet pan, and cigarette butt etc is not allowed to be thrown into the toilet pan.
ATTENTION

Please follow the rules

| When using in shower room, please install air exchange equipment to ensure the airy and drying in the shower room. This product is electric products, it is not allowed to install it in a place that is easily wet, easily split by water,

otherwise, it might trigger electric shock or fire.

Please ensure to cut off the electric power before washing this product, must not use water to directly wash this product, otherwise, it might trigger the

electric shock or fire.

Please put and use this product in the shadow, must not put it directly beneath the sun, otherwise, it might cause the color-fading, or let the sunlight burn the

the surface of the product due to the un-stability of temperature.

Do not use industrial water, wastewater, seawater, reclaimed water, and other sewage, otherwise, it may cause skin inflammation and other problems.
ATTENTION

Please follow the rules

| Persons (including children) with physical, perceptual, or intellectual disabilities or lack of experience and common sense need to use the product under the guidance or supervision of someone else, or they may cause electric shock,

injury or fire.

Must notice the assembly location of the electric wiring plug, the electric plug need to use the water-proof plug;

The assembly location of the electric plug must be over 0.5m above the floor, and far away from the shower, and bathtub, otherwise, it might cause electricity leakage.

When installing this product, please remove the old hose assemblies owned by users and install them with new hose assemblies. Do not reuse the old

hose assemblies to avoid related safety problems.

The grounding wire of this product must conform to the stipulated construction mode, and the three-level grounding structure must be

grounded, otherwise, the use of this product is prohibited.

An electric plug needs to plug in the electricity with an air switch; This product must be effectively grounded before use.

Bill of material

MAIN ENGINE

Specification

Washing equipment

|

Water

yield

| Posterior cleaning|

About 0.4-0.7L/min(hydraulic pressure of 0.2MPa)

Feminine cleaning
Swing cleaning| Swing cleaning back and forth
Massage cleaning| Interval clearing、Powerful clearing
The adjustment of the water

gear and nozzle place

| 3 grades device
Effluent-water temperature

range

| About 35℃-42℃（Top Gear）
Safety device| Limiting the circuit by the software of over-temperature fast Temperature control switch & Temperature fuse

Drying

| Drying temperature control| About 32℃-55℃（Top Gear）
Safety device| Temperature control switch & Temperature fuse

Seat cover

| Temperature range| Room temperature-42℃（3 grades device and closes）
Soft-close control for seat

cover

| Damper device
Safety device| Temperature sensor & Temperature control switch & Temperature fuse

Self-cleaning

| Antibacterial seat cover

/nozzle

| It’s made of anti-bacteria plastic
Nozzle| Self-cleaning
Rated power| 1070W| Maximum power| 1600W| Waterproofing

grade

| IPX4
Temperature of supplied-water| 4℃-35℃| Ambient

temperature

| 3℃-40℃

Pressure of supplied-water

|

0.08MPa（Dynamic）-0.75MPa（Static）

1. The rated power： water pressure is 0.18MPa + 0.02MPa under the ambient temperature of 23℃±2℃， And under the condition of 15℃±0.5℃ water-inflow temperature， heighten the water quantity， the seat temperature and the water temperature in turn， to start the feminine cleaning in average power.
2. Maximum power： water pressure is 0.18MPa+0.02MPa under the ambient temperature of 23℃±2℃，Andunder the condition of 5℃±1℃ water-inflow theperature， heighten the water quantity， the seat temperature, and the water temperature in turn， to start the feminine cleaning in an average power

Product Drawing

The power outlet and the inflow-water connection (reminder)

• If the power cord length is not long enough， please choose the professional extension line which is made by manufacturers!

Functions Introduction

Cleansing function

Comfort functions

dry.
Seat sensor| Functions effective after seated.
Soft close function| Soft-closed toilet cover and seat

LED night light

| Working principle: Under sitting on the sensing area status, a small window on the side of the toilet seat will receive the light source of the external environment, if the light is bright, LED night light will not light up. If the light source is dark enough, the LED night light will light up automatically, and close within 3 seconds after you leave the toilet seat.
Prevent the low-temperature scald| To prevent scalding users， the seat temperature will decrease automatically after seated 15mins.

Cleaning function

Anti-bacteria| It’s anti-bacterial and treated on the parts that are directly touched by users, such as the cover and seat.
---|---
Nozzle cleaning| A nozzle will be cleaned when it reaches out or pulls back.
Water emission| Drain the remaining water in the toilet to make the water cleaner.

Product installation

【TIps】

1. Put expansion nuts into installation holes;
2. Put fast-install baseboard on installation holes;
3. Put adjustable sliding vane on fast-install baseboard;
4. Fix adjustable sliding vane and baseboard to ceramic body through expansion screws.

Put the cover seats in the direction of the fast-install baseboard， and push the cover seas as the arrow shows. cover seat is installed after sound.

Tips for installation of fast baseboard

1. Install the baseboard and cover seat fully tightened and adjust the position.
2. Take out the cover seat after pressing the button again.
3. Fix the baseboard， then install the cover seat.

Water is supplied by connecting products

1. connecting tee coupling to inlet angle valves.
2. Connecting the filter to tee coupling.
3. Connecting braided pipe to the filter.
4. Connecting braided pipe to water inlet connector of a toilet.
5. Connecting tank braided pipe to tee coupling.

WARM PROMPT

• After finishing the installation， turn on the inflow valve to make sure that the seat sensor is sensible， and then press each button to check if the toilet is working after sitting
  induction is ok. The products have been test with water， and it is normal if out small amount of water when taking out products

Press the reset button of the power plug, and the power indicator shows red to work. There will be a sound when the power is turned on

1.  When the power indicator is gray, press the test button for leakage protection
2.  When the power indicator is red, press the reset button after the electronic sound response

After finishing the installation， turn on the inflow valve to make sure that the seat sensor is sensible， and then press each button to check if the toilet is working after sitting induction is ok.

Parts name

Remote control panel overview

User Mode Setting

User1/User 2 customization: when you sit down and enjoy the cleaning function, choose suitable levels for water temp., water volume, nozzle position, and air temp.”, then long press the “ BIDET and MASSAGE button” or“ BIDET and SWING button” at the same time for more than 3secs until you see all level indicator lights flicker twice, means your habits have been saved. When you use USER1 or USER2 next time, please long press the” MASSAGE or SWING button” until you see all level indicator lights light up for 1 sec, then press the bidet or rear button to enjoy your mode.

Remark

User 1 setting combination button: BIDET and MASSAGE button, after finishing setting the mode, next time need only long-press the “ MASSAGE button” to activate the mode. User 2 setting combination button: BIDET and SWING button, after finishing setting the mode, next time need only long-press the “ SWING button” to activate the mode.

Instructions

Flow adjusting

Under posterior mode or feminine mode， pressing the plus button will increase the water flow， and pressing the minus button will decrease the water flow. There total 3 gears， and the corresponding indicator will be on under different gears.

Seat temperature adjusting

Seat heated after opening， pressing the plus button will increase seat temperature， and pressing the minus button will decrease seat temperature. A total 3 gears and corresponding indicators will be on under different gears.

Warm prompt

• Please adjust the seat temperature to ordinary or low temperature. To prevent the user is scalded， the system will decrease seat temperature after seated 15 minutes. Please click the remote control softly and keep it properly； please push the side button softly

Side push button instruction

Posterior & Feminine cleaning function show

• Function 1 ：Press posterior/feminine cleaning button to start cleaning hip/women’s private parts.
• Function 2 Based on Function 1 as above， press the relevant button again to stop cleaning.
• Function 3 ：Hold the“Posterior/posterior/Feminine” Cleaning button for more than 2 seconds to start fully auto working mode， the work steps are as below： Back and forth Posterior/Feminine Cleaning 30S-back and forth powerful massage 60s-drying 2 minute
  Stop working.
  Remark ： The remote could stop or start back and forth cleaning & switch massage working mode. Press the posterior cleaning button for more than 5 seconds it can turn off/on the LED.

Dry function show：

• Function 1 ：Press the dry button to start drying the moist parts with warm wind.
• Function 2: Under dry mode，press the dry button to stop drying. Push button function show

Push button function shows：

• Function 1 Under posterior/feminine cleaning mode， push forward the side button to adjust the position of the nozzle; (default gear is 2, total 3 gears)

• Function 2 Under posterior/feminine cleaning mode， push forward the side button to adjust the volume of water; (default gear is 2， total 3 gears)
  Remark： The way to switch the above two functions is to hold the dry button for more than 2 seconds， the function switch successfully after it sounded“ Di”；

• Function 3 Under the dry mode， push forward the side button to adjust temperature;(default gear is 2， total 3 gears)；

• Function 4: push the side push button forward for a long time to drain the water from the water tank when not in the seated state;

• Function 5: push the side push backward for a long time to turn on or off the beep when not in the seated state.

If the buzzer sounded two，it means that the function has reached limit when in use

Instructions for Remote Control Installation

Method 1

1. Install the remote controller fixing panel with a magnet on the remote control fixed seat and lock tightly. Note ： pay attention to the polarity when installing the magnet. Place the larger side of the magnet hole outside the fixed panel， and enclose the small hole surface inside the fixed panel； as shown in below figure 1.
2. Put the double-sided tape on the remote control fixed seat.
3. Clean dust, grease， and water droplets on the walls and wipe them clean.
4. Press the remote control fixed seat with double-sided tape on it. Press it evenly for 3 to 5 minutes. Attach the remote control fixed seat to the wall Note ： The method is applicable to glazed tiles， glass, and smooth walls.

Method 2

1. Drill hole of 46mm~52mm in length and 22mm depth on the wall by the drill with a diameter of 6mm. Note： the position of the hole shall be satisfied when the person is seated on the seat cover， it is convenient for the user to catch the remote control.
2. After installing the expansion plug in the wall，align the fixing hole of the remote controller at the expansion plug and then locking the bolt. Install the remote controller fixing panel with a magnet on the remote control fixed seat and lock tightly. Note：pay attention to the polarity when installing the magnet.Place the larger side of the magnet hole outside the fixed panel，and enclose the small hole surface inside the fixed panel；as shown in the below figure 2.

Put the remote controller on the fixed base after installing the battery， and the remote controller can automatically absorb the fixed base.

Note：

• Please place the remote in a fixed place if not used (To avoid the remote falling).
• It may cause damage if the remote controller falls.
• Please do not spill water on the remote control or drop it into the water，or it may cause damage.

Measures for removing instructions

1. Pull the power supply plug， and turn off the inlet valves. And turn on the braided pipe and drain water out of a pipe
2. Press a fast-install button， remove cover seat from the toilet
3. Press the water outlet button“ A” to drain the water from the toilet. Press the water outlet button“ B” to drain the water from the water tank

WARM PROMPT: Please check and test before use the products again.

Cleaning

1. Close the water-inflow valve.
2. Pull the plug and then unscrew the hose.
3. Press the quick installation button and take off the seat cover.
4. Wipe the seat cover with a sponge or a smooth cloth dipped in soapy water or neutral detergent.
5. Install the seat cover

Inlet filter screen cleaning

Nozzle cleaning

1. In the non-seated state, press the hip / women’s washing button on the remote control for more than 2 seconds. After the nozzle automatically extends
   from the machine, remove the nozzle from the nozzle

2. Wipe the nozzle and spray rod with the toothbrush， sponge，or smooth cloth with soap or mild detergent

3. After installing the nozzle， Press the Stop button or press the Posterior cleaning button & Bidet Button after 2 seconds，the nozzle will be automatic retraction into the machine

• WARM PROMPT  Please do not use hydrogen chloride cleaning agent，diluent，pesticides and other non-neutral detergent to clean the product，and do not use sandpaper or rough cloth to scrub it.

Filter replacement

1. Close the water-inflow.
2. Unscrew the braided hose， then take off the original one. Suggestion： Replace the filter after using 4 to 6 months（. The exact use period depends on the different water quality
3. Fit the new filter and tighten the hose
4. Open the water- inflow

Common troubles and shooting

the leakage protector is disconnected.

| Switch the power supply

No response when press the the button of Posterior cleaning &feminine cleaning &drying

|

No water outflow from the nozzle or the water yield is very

| Please press the stop button and wait for the water supply.
Please open the water-inflow valve if it is closed

Please clean or replace the filter device if it is blocked

The sensor is unsensible if someone sits on| Please sit down in the correct position.
The nozzle stops cleaning suddenly| If the user moves too fast or leaves the seat, the seat sensor cannot detect in a short time.| Sit back on the seat sensor detection position, then start the relevant button
Low water pressure when Posterior cleaning or feminine cleaning.| The filter may be blocked| Clean the filter screen or replace the filter
The water-inflow hose may leakage| Check the hose and tighten it

The toilet seat can’t be heated

|

The seat sensor is not sensitive to the user.

| Please close to the position of the sensor as far as possible when

you use it.

The lower seat temperature is set.| Adjust the seat temperature with a remote control.
Cold water of Posterior cleaning and feminine cleaning|

A lower water temperature is set.

| Adjust the water temperature with a remote control.
The drying temperature is not enough.| Lower drying temperature is set.| Adjust the drying temperature with remote control.

Troubleshooting and alarm maintenance

detected that the inlet water temperature sensor is faulted or broken circuit.|

You should cut off the power supply immediately and stop using the product， then contact the local dealer or call service hotline.

If the power light glitters 2 times as it lights for 2 seconds| It can be detected that the outlet water temperature sensor is faulted or broken circuit.
If the power light glitters 3 times as it lights for 2 seconds| It can be detected that the wind temperature sensor is faulted or broken circuit.
If the power light glitters 4 times as it lights for 2 seconds| It can be detected that the seat temperature sensor is faulted or broken circuit.

If the power light glitters 7 times as it lights for 2 seconds

|

It can be detected that the dryer fan is faulted.

WARM PROMPT

If you are in trouble， please read the above troubleshooting and repair the product according to the instructions of the solution. If the problem is not in the common troubleshooting，please contact the professionals， or dealers， or call the national unified service hotline to ask for help. Please note that there will be no notification if any changes to this product and also accessories.

Maintenance Service Sheet

Appendix 1

Product model| | Manufacture number|
---|---|---|---
The selling store| | Purchase date|
Province                      City| Deale（r signature）：
Maintenance content|
Free maintenance regulation：

1. Free maintenance is provided when you use it properly in accordance with instructions and under warranty.

2. Please contact the dealer or the company if the fault occurs under warranty.

3. Although during the warranty period, the following situations need to be repaired for a fee:

① Faults or damages caused by the improper operation, repair, or reinstall.

② Faults or damages caused by forced movement after the product is installed.

③ Faults or damages caused by natural disasters (earthquakes, fires, floods, lightning strikes, and other natural disasters) or corrosive liquids or abnormal voltage.

④ Faults or damages caused by other approaches that are not for family use.

⑤ Fail to provide the maintenance service sheet.

⑥ There is no detailed records or there are modified records on the maintenance-service sheet.

4. This maintenance-service sheet is valid.

5. This maintenance-service sheet is unrepeatable, please safe keep it.

6. The customer can go to the local repair network or send the products back to the company for free repair within two years from the purchase date.

client stub

Appendix 2

Client

| Name| | Telephone| | Postcode|
---|---|---|---|---|---|---
Address|
Product model| | Manufacture number|
The selling store| | Purchase date|
Warranty period| within two years from the purchase date

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>