SPEAKERLIGHTKITS DE Spike 1 Speaker Lighting Rotation System Instructions
- June 10, 2024
- SPEAKERLIGHTKITS DE
Table of Contents
Spike 1 Speaker Lighting Rotation System
Product Information: Speaker Light Kit Rotation System
The Speaker Light Kit Rotation System is a lighting system designed for pinball machines featuring popular themes such as Game of Thrones, Ghostbusters, KISS, and Wrestlemania. It comes with a Spike 1 rotation system and is powered by a 5V power supply, which is connected to the 12V power supply of the pinball machine. The kit includes a controller board, a small black voltage transformer, and a remote control.
Note:
It is recommended to unplug the pinball machine before opening and mounting to avoid any damage to the device or the lighting system.
Product Usage Instructions
- Open the backbox of the pinball machine and fold down the cover.
- Place a soft object between the bezel and the disc to take the pressure off the bezel and avoid scratches on the siderails.
- Unscrew the speaker and mount the Speaker Light Kit on the bracket where the speaker was sitting before. The opening with the cables must point towards the DMD.
- Mount the speaker on the Speaker Light Kit. If the speaker system has an additional mounted capacitor, it has to be fixed at the UPPER screw to avoid short circuits.
- Connect the controller board to the Speaker Light Kit via the 3-pin connector.
- Connect the system to the pinball machine.
- Make sure that + and – are not interchanged while mounting the connector on the board. (+) = red cable (-) = black cable.
- Place the voltage transformer (small black box) in the backbox and close the cover.
- Reconnect the power plug and start the system.
- Use the remote control to set the colors fixed or select an effect.
We hope you enjoy the Speaker Light Kit Rotation System from SpeakerLightKits.de!
Note in advance
- The SpeakerLigtKit Rotation System works with a 5V power supply.
- It is powered by the 12 V power supply of the pinball machine.
- It should only be connected as described in this manual in order not to cause damage to the device or the lighting system.
Even if working with a low voltage, it is recommended to unplug the pinball machine before opening and mounting.
Assembly
Open the backbox and fold down the cover.
It is recommended to put a soft object between the bezel and the disc to take
the pressure off the bezel and avoid scratches on the siderails.
Unscrew the speaker
- Mount the SpekerLightKit on the bracket where the speaker was sitting before. The opening with the cables must point towards the DMD.
- Mount the speaker on the SpeakerLightKit.
- If the speaker system has an additional mounted capacitor, it has to be fixed at the UPPER screw, because it could cause a short circuit at the side.
- The right and left loudspeakers are identical in mounting.
- Connect the controller board to the SpeakerLightKit via the 3-pin connector and connect the system to the Pinball.
- When mounting the connector on the board, make sure that + and – are not interchanged.
- (+) = red cable
- (-) = black cable
- Place the voltage transformer (small black box) in the backbox and close the cover.
- Reconnect the power plug and start the system.
- The remote control can be used to set the colors fixed or select an effect.
- We wish you a lot of fun with the rotation set from SpeakerLightKits.de