ZAGG ZPDWC Wireless Charging Desk Mat User Guide

ZAGG ZPDWC Wireless Charging Desk Mat

Product Information

The FCC certification of this device indicates that it has undergone RF exposure testing in typical operating conditions. The testing ensures that when a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second, the device fully complies with the FCC RF Exposure requirements of KDB 447498.

Specifications

• Model: [Insert Model Name/Number]
• FCC Certification: Yes
• Operating Distance: 20 centimeters
• Compliance: FCC RF Exposure requirements of KDB 447498

Product Usage Instructions

1. Step 1: Unboxing
   Open the product packaging and remove all contents. Ensure that all components are included and undamaged.

2. Step 2: Charging
   Before first use, connect the device to a power source using the| provided charging cable. Allow the device to charge fully before proceeding.

3. Step 3: Power On/Off
   To turn on the device, press and hold the power button for 3 seconds. The device will emit a startup sound or display an indicator light. To turn off the device, press and hold the power button again until it powers down.

4. Step 4: Pairing
   Activate the Bluetooth function on your smartphone or other compatible device. Put the device into pairing mode by pressing and holding the pairing button for 5 seconds. The indicator light will start flashing rapidly. On your smartphone, select the device from the list of available Bluetooth devices to establish a connection.

5. Step 5: Usage
   Once the device is paired successfully, you can start using it. Follow the specific instructions provided in the user manual for the intended purpose of the device. Ensure that you keep a distance of at least 20 centimeters from the device surface during operation.

For a full instruction manual, please visit

zagg.to/instructions.

Set-up

Lay the ‘Nireless Charging Desk Mat 1at on your desk or tabletop. Plug the integrated use.-c cable into your compatible power adapter.

To Charge
Place your digital device (phone, tablet, keyboard, mouse, stylus, etc.) on the I OW wireless charging spot centered at the top of the mat Digital devices should be able to accept up to I avv of povver.

To Clean

• Use a dean, damp doth to v.ipe the Wireless Charging Desk Mat
• Do not v.ipe the charging spot centered at the top of the mat
• Do not put Wireless Charging Desk Mat in the washing machine or dishwasher.
• Do not submerge the Wireless Charging Mat in water.

To Straighten
If your Wireless Charging Desk M«t develops a lump or ripple.
bend the ripple in the opposite direction for 5 seconds. This should help straighten it out Once the mat is smoothed down, it will relax over time to a flat position again.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: I) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
  protection against harmful interference in a residential installation.

• This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consu~the dealer or an experienced radio/TV technician for help.

• Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment

Radiation Exposure Statement

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

References

• Shop ZAGG for mobile accessories from our industry-leading brands—mophie, InvisibleShield, ZAGG, Gear4 and more.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>