SUNNY HEALTH FITNESS JJD2601 Smart Air Walk Trainer User Manual

SUNNY HEALTH FITNESS JJD2601 Smart Air Walk Trainer

IMPORTANT! Please retain the owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US:

• support@sunnyhealthfitness.com or
• 1- 877 – 90SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheartedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat-level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/ or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 220 lbs (100 kgs).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool, dry conditions. You should avoid storage in extremely cold, hot, or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use!

PRE-ASSEMBLY CHECKLIST

Ordering Replacement Parts (U.S. and Canadian Customers only)

Please provide the following information in order for us to accurately identify the part(s) needed:

• The model number (found on cover of manual)
• The product name (found on cover of manual)
• The part number found on the “EXPLODED DIAGRAM” (page 13) and “PARTS LIST”.

Please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 1:

Unfolding the Air Walker Trainer

Pull out the large Ball Pin (No. 26), located halfway through the swing bars, to unlock the swing bars. Pull out the Ball Pin (No. 43) located in the hinge where the two support tubes meet. This will unlock the Connecting tube (No. 45) from the Main Frame (No. 1). Push the Connecting Tube (No. 45) away from the Main Frame (No. 1) or the direction indicated by the arrow. Reinsert the Ball Pin (No. 43) into the aligned holes on the hinge to secure the Main Frame (No. 1).
NOTE: When the Connecting Tube (No. 45) moves, the Right Front Tube (No. 23), Right Rear Tube (No. 24), Left Rear Tube (No. 27) and Left Front Tube (No. 28) will move as well. Be careful not to hurt your arms.
Unfold the Left Pedal Tube (No. 36L) and Right Pedal Tube (No. 36R) to have the machine fully unfolded.

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 2:

Attaching the Support Tube

Remove 2 Allen Screws (No. 16) From Support Tube (No. 11). Insert the Support Tube (No. 11) into the slot located at the top of the Main Frame (No. 1). Align the holes on the Support Tube (No. 11) with the holes on the slot. Insert two Allen Screws (No. 16) into each hole and use the Allen Key (No. A) to secure them. Insert the Ball Pin (No. 26) into the top hole of the Support Tube (No. 11) for safekeeping.

STEP 3:

Assembling the Handlebars

Remove 2 Bolts (No. 6), 2 Washers (No. 5) and 2 Nuts (No. 4) from Left Handlebar (No. 3L). Make sure the square holes on each handlebar are facing outward, as shown on the left. Insert 2 Bolts (No. 6) making sure the square part of the bolts lock into the square holes on the Left Handlebar (No. 3L). Place a Washer (No. 5) and a Nut (No. 4) on each Bolt (No. 6) and use a Wrench (No. B) to secure the Left Handlebar (No. 3L) onto the Left Front Tube (No. 28). Use the same steps to secure the Right Handlebar (No. 3R) onto the Right Front Tube (No. 23).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 4:

Assembling Device Holder

Unscrew the Nut (No. 57) and Flat Washer (No. 56) on the Device Holder (No. 54). Attach the Device Holder (No. 54) to the Device Holder Support Tube (No. 51) by using the same Nut (No. 57) and Flat Washer (No. 56).
NOTE: The gap (F) of the Device Holder (No. 54) and the gap (G) of the Device Holder Support Tube (No. 51) should be aligned.
Remove 2 Bolts (No. 58) from Device Holder Support Tube (No. 51). Insert the Device Holder Support Tube (No. 51) into the Main Frame (No. 1). Then secure it with 2 Bolts (No. 58) using an Allen Key (No. A).

STEP 5:

Attaching the Meter

Slide the Meter (No. 17) onto the bracket located on the Main Frame (No. 1 ).

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

STEP 6:

Attaching the Resistance Band

Attach one side of the Resistance Band (No. 50) on the hook under the Left Pedal Tube (No. 36L). Then pass through the slot between the Wheel (No. 49) and the sheet metal under the Left Pedal Tube (No. 36L). (Show as the arrow).
Continue to pass through the Resistance Band (No. 50) to the slots between the Wheels (No. 49) on the Connecting Tube (No. 45) (Show as the arrow). Next, pass it through the Wheel (No. 49) and the sheet metal under the Right Pedal Tube (No. 36R) (Show as the arrow). Then attach the end of the Resistance Band (No. 50) to the hook under the Right Pedal Tube (No. 36R)
NOTE: There are 3 hooks under the Left Pedal Tube (No. 36L) and Right Pedal Tube (No. 36R). The hooks can be used to adjust the resistance according to your own needs.

FOLDING INSTRUCTIONS

1. Take out the Ball Pin (No. 43) from the Main Frame (No. 1). Hold the Device Holder Support Tube (No. 51), then move the Connecting Tube (No. 45) toward the Main Frame (No. 1) as pictured.
   NOTE: When the Connecting Tube (No. 45) is moved, the Right Front Tube (No. 23), Right Rear Tube (No. 24), Left Rear Tube (No. 27) and Left Front Tube (No. 28) will move as well. Be careful not to hurt your arms.

2. Insert Ball Pin (No. 43) into the folding hole of the Main Frame (No. 1). Insert the Ball Pin (No. 26) into the hole H1 of the Left Rear Tube (No. 27), the hole H2 of the Main Frame (No. 1) and the hole H3 of the Right Front Tube (No. 23) accordingly.

3. Fold the Left Pedal Tube (No. 36L) and the Right Pedal Tube (No. 36R) in the direction indicated by the arrows.
   NOTE: After folding, it is recommended that the product be placed against the wall to prevent falling.

EXERCISE METER

KEY FUNCTION:

• MODE/SELECT: To select the function you want. Hold the key for 3 seconds to reset CNT TIME CAL values.
• AUTO ON/OFF: The monitor will be turned on automatically when the exercise starts or the key is pressed. The monitor will be automatically turned off after 4 minutes of inactivity.

FUNCTIONS:

• TIME: Display the total time since the exercise started
• CNT: Display the step count while exercising.
• CAL: Display the total calories burned while exercising.
• TOT CNT: Display the total steps of all your sessions. The Total Count will be reset once you replace/disconnect the battery.
• SCAN: Press the button to select “scan”. This function will automatically scan through TIME, CALORIES and TOTAL COUNT displayed on the bottom of the monitor.

SPECIFICATIONS

• CNT————————————————–0—9999 TIMES
• TIME————————————————-00:00—99:59 MIN: SEC
• CALORIES—————————————–0—9999 KCAL
• TOT.CNT——————————————-0—9999 TIMES

NOTE: Please replace the battery when the meter does not display properly.

BATTERY INSTALLATION AND REPLACEMENT

BATTERY INSTALLATION:

1. Press the buckle of the battery cover on the back of the Meter (No. 17) to remove the battery cover.
2. Install 2 AA batteries into the battery case on the back of the Meter (No. 17). Pay attention to the battery + and – ends before installing.
3. Press the buckle of the battery cover, then put the battery cover back to the back of the Meter (No. 17).
   The installation is complete!

BATTERY REPLACEMENT:

1. Press the buckle of the battery cover on the back of the Meter (No. 17), to remove the battery cover.
2. Remove the 2 old AA batteries in the battery case and install 2 new AA batteries into the battery case on the back of the Meter (No. 17). Pay attention to the battery + and – ends before installing.
3. Press the buckle of the battery cover, then put the battery cover back to the back of the Meter (No. 17).
   The replacement is complete!

NOTE: Always change both batteries at the same time. Do not mix battery types and do not mix old and new batteries. Dispose of batteries according to your state and regional guidelines.

USING THE AIR WALKER TRAINER

• PLACING YOUR FEET ON THE AIR WALKER TRAINER
  Stand behind the Air Walker Trainer with each hand holding one of the handlebars. Make sure to push and pull each handlebar prior to placing your feet on the foot pedals, to feel the tension and motion of the machine. Steadily hold the right handlebar as you place your right foot on the right pedal. Continue to steadily hold each of the handlebars as you balance on your right foot to lift your left foot and place it on the left pedal.

• USING THE AIR WALKER TRAINER
  For optimal movement, you will need to have a steady push and pull motion. As you push one arm, you will need to pull the other arm, in tandem, to create a steady walking motion on the machine. Make sure you are balanced and use smooth, controlled movements.

• Balance Adjustment
  Before using, check the balance of the product to ensure it is safe for use. Put the product on a flat, even surface. If the product is slightly uneven, rotate the Adjustable Caps (No. 46) on the Main Frame (No. 1) to compensate for the uneven ground.

APP CONNECTION

1. Scan the QR code below to download the SunnyFit app onto your mobile device
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in.
3. Ensure that the Bluetooth function is turned on from your mobile device.
4. To connect the equipment to the SunnyFit app:
   • a. From the “Workout” tab, press on the “Search” button to search for your equipment.
   • b. Once your equipment appears on the list, tap the “Select” button to confirm.
   • c. NOTE: If your equipment does not appear on the “Searching for Equipment” list, check the METER on your equipment to ensure that it is not in sleep mode and your phone’s Bluetooth function is on, then tap “Retry” to search again.
   • d. Once your equipment shows up on the “Workout” tab as “Currently Selected,” your equipment is now ready to display, track, and record your equipment’s workout stats on the app!
5. If you are unable to replicate these steps or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com, or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”).

PARTS LIST

No.| Description| Spec.| Qty.|  | No.| Description| Spec.| Qty.
---|---|---|---|---|---|---|---|---
1| Main Frame|  | 1| 33R| Right Pedal Connector|  | 1
2| Sponge| φ29φ23200| 2| 34| Bearing Sleeve|  | 4
3L| Left Handlebar|  | 1| 35| Screw| ST4.820| 4
3R| Right Handlebar|  | 1| 36L| Left Pedal Tube|  | 1
4| Nut| M8| 10| 36R| Right Pedal Tube|  | 1
5| Washer| φ8.2φ161.5| 10| 37| Plug| F25501.5| 2
6| Bolt| M842| 4| 38| Stopper|  | 4
7| Screw| M820| 4| 39| Connecting Sleeve|  | 2
8| Bolt Cap|  | 4| 40| Plug| F25252.0| 4
9| Washer| φ8.2φ251.5| 4| 41| Front Cap| φ50| 2
10| Bearing Sleeve|  | 8| 42| Bolt| φ1232.5,M8| 1
11| Support Tube|  | 1| 43| Ball Pin| φ1066.5| 1
12| Chest Pad|  | 1| 44| Bolt| φ1222.5,M8| 1
13| Plug| F20401.5| 3| 45| Connecting Tube|  | 1
14| Knob| M830| 1| 46| Adjustable Cap| φ50| 2
15| Screw| M815| 1| 47| EVA Pad|  | 1
16| Allen Screw| M816| 2| 48| Bolt| M840| 5
17| Meter| JJD2601| 1| 49| Wheel| φ21φ8.122| 5
18| Plug| F60602.0| 1| 50| Resistance Band| φ8*580| 1
19| Magnet Bracket|  | 1| 51| Device Holder Support

Tube

|  | 1
20| Screw| M3| 1| 52| Sleeve| φ22| 2
21| Magnet|  | 1| 53| Bolt| M875| 1
22| Cap|  | 4| 54| Device Holder|  | 1
23| Right Front Tube|  | 1| 55| Device Holder Fix Plate|  | 1
24| Right Rear Tube|  | 1| 56| Flat Washer| φ6.4φ181.2| 1
25| Plug| φ251.5| 2| 57| Nut| M6| 1
26| Ball Pin| φ10180| 1| 58| Bolt| M816| 2
27| Left Rear Tube|  | 1| 59| Bolt| M512| 1
28| Left Front Tube|  | 1| A| Allen Key| S6| 1
29| Pedal|  | 2| B| Wrench| S10-13-17| 1
30| Nut| M10| 4| C| Battery| AA| 2
31| Washer| φ10.5φ26*2.0| 4| D| Thank You Card|  | 1
32| Bearing Sleeve|  | 4| E| User Manual|  | 1
33L| Left Pedal

Connector

|  | 1|  |  |  |

EXPLODED DIAGRAM

Track your fitness progress &join FREE workout courses! DownloadSUNNYFIT” today!

Find us on social media @sunnyhealthfitness

• Inst: @sunnyhealthfitness
• FB: @sunnyhealthandfitness
• Twitter: @sunnyhealthfit
• youtube: sunnyhealthfitness
• titok: sunnyhealthfitness
• Pinterest: sunnyhealthandfitness
• www.sunnyhealthfitness.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>