PULWTOP BH118F USB C Hub Instruction Manual

June 16, 2024
PULWTOP

PULWTOP BH118F USB C Hub

PULWTOP-BH118F-USB-C-Hub-PRO

Physical Layout

PULWTOP-BH118F-USB-C-Hub-1

Note:

  1. All USB-C ports only support data transfer, not support charging and video.
  2. It is recommended to connect three hard drives at a time.
  3. When connecting to a mobile phone, you need to download the assistant file:
    • Android: Android file transfer
    • iPhone/iPad: iMazing

Introduction

USB 3.2 GEN210Gbps Hub with Aluminum Profiled USB C cable and all-aluminum profile housing. The USB multiport adapter is easy to use and portable. The total length of the wire is 30CM plus and the diameter is SMM, USB C 3.2 GEN 2*4 & 10 Gbps 3A MAX/TYPE-C 0.9A.

Specifications

  • Output: USB-C 3.2 GEN2*4 & 10Gbps 3A MAX/TYPEC 0.9A
  • Input Parameters: USB-C 3.2 GEN2*1 & 1 0Gbps 3A MAX
  • Product Size: 90.239.Bl 5.8mm
  • Product working temperature: Room Temperature: 25 ‘C
  • Full Load: lower than 45 C
  • Product weight: 65g

Package Content

  • USB-C Multi-port Hub
  • Instruction Manual

Troubleshooting

  1. Does this hub support video transmission?
    No, all 4 USB-C ports only support data transfer.

  2. When I connect all 4 USB-Cports, why can’t I reach 10Gbps?
    This 4-port USB-C upstream interface has a maximum theoretical bandwidth of 10 Gbps. When we connect only one USB-C port, the maximum speed (10Gbps) can be achieved, but when multiple USB-C ports are connected, the bandwidth will be automatically allocated, so less than 10 Gbps.

  3. Can l charge my laptop via any USB-C port?
    All these 4 USB ports are data ports only. We cannot charge our laptop via any of these ports.

  4. Will these USB-C ports supply power to external devices?
    The four USB-C ports on this Hub have an external output power of about 4.5 w (SV 0.9A). So it can power downstream devices at very low power, but this will drain power from the connected master device.

  5. Can the product support connecting a USB-C to a J45 adapter?
    The product supports connecting a USBC to RJ45, you need to manually set the IP.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals