GHORA S1 Smart Dog Bark Control Collar Instruction Manual
- June 16, 2024
- GHORA
Table of Contents
GHORA S1 Smart Dog Bark Control Collar
Product Introduction
- Specifications:
- Product Name: Smart Dog Bark Control Collar
- Age Recommendation: For dogs over 6 months
- Not suitable for aggressive dogs
- Keep out of reach of children
- Product Components:
- Bark Collar
- User Manual
- Metal Prongs
- Prong Covers
- Magnetic Charging Cable
- Mode Button
Product Usage Instructions
- Test The Product
- 1A. Charge the Bark Control Collar before use:
- You can charge the product via PC, Power Bank, or Charger with an output voltage of 5V for 2-3 hours.
- Description of Charging:
- When the product is on charge, the battery bar blinks from left to right and 2 indicators blink fast.
- When the product is fully charged, the battery bar stops blinking and 2 indicators become solid.
- A warning tone will be delivered if the product is on charge with an improper charger.
- Notes:
- Improper charger means one with an output voltage over 5V, which can usually be seen on its surface.
- Use the magnetic charging cable provided in the package. Other magnetic charging cables may not be suitable and may cause electric damage.
- 1B. Power on the Bark Control Collar:
- Press and hold the Power Button for 2 seconds to power it on. The display will turn on, and 2 indicators will start to blink slowly.
- 1CB. Set the Bark Control Collar to Test Mode:
- The display will show digit 0. After that, imitate a dog bark towards the sensor Mic located at the back of the product.
- Press the power button to get to the Test Mode, make sure the digit shows 0 before the test.
- 1DB. The Bark Control Collar responds at Test Mode:
- Note: The hexagon hole on the Test Bulb Tool can be used to fasten or unfasten the Probes to the Contact Points.
- If the product responds as described above, you’ve succeeded in setting up the Bark Control Collar properly.
- Put the Product on Your Dog
- Note: Have a look if you have a small dog!
- Please ensure to fit the product snugly, yet loose enough to allow one finger to fit between the strap and your dog’s neck.
- If the product responds as described above, you’ve succeeded in setting up the Bark Control Collar properly.
- Mode Setting
- The following instructions will guide you through the process of switching modes:
- Power on the product by pressing and holding the Power Button for 2 seconds.
- Press the Mode Button to switch modes. The mode icons will be changed according to the display.
- Modes:
- Variable Warning Tone: 6 variable warning tones of different frequencies in 6 steps.
- Variable Warning Tone + Vibration Mode: 6 variable warning tones + 3 levels of vibration working collaboratively in 6 steps.
- Vibration Mode: 3 levels of vibration in 3 steps.
- Variable Warning Tone + Vibration Mode + Shock Mode: 6 variable warning tones + High level vibration + 6 levels of shock working collaboratively in 6 steps.
- Indicators:
- Blinking Fast: Product is on charge.
- Blinking Slowly: Product is in standby mode.
- Blinking Alternately: Battery is low.
- Become Solid: Product is fully charged.
- FAQ (Frequently Asked Questions):
- Q: Can I use this collar for aggressive dogs?
- A: No, this collar is not suitable for aggressive dogs.
- Q: Can I use this collar for puppies?
- A: This collar is recommended for dogs over 6 months old. Please consult with a veterinarian before using it on puppies.
- Q: Can children use this collar?
- A: No, this collar is for dog use only. Keep it out of reach of children.
Important Safety Information
Product Information
Test The Product
You can charge the product via PC, Power Bank or Charger with output voltage of 5V for 2-3 hours.
1A. Charge the Bark Control Collar before use
- Description of Charging
- When Product is on charge, battery bar blinks from left to right and 2 indicators blink fast.
- When product is fully charged, battery bar stopblinkingand2 indicators becomes solid.
- A warning tone will be delivered if product is on charge with an improper charger.
Notes:
- Improper charger means one with output voltage over 5 V, which can usually be seen on the surface of it.
- Use the magnetic charging cable in package, other magnetic charging cable may not be suitable for the product and may cause electric damage.
- 1B. Power on the Bark Control Collar
- Display will turn on and 2 indicators starts to blink slowly.
- Press and hold the Power Button for 2 seconds to power it on.
- 1CB Set the Bark Control Collar to Test Mode, the display will showdigit0.After that, imitate a dog bark towards the sensor Mic located at thebackoftheproduct.
- When the product is set on Test Mode, it will deliver tone, vibration and static shock after you imitate dog bark towards the sensor Mic whichever function icons are on.
- 1DB The Bark Control Collar responds at Test Mode:
- Note: The hexagon hole on the Test Bulb Tool can be used to fasten to the Contact Points.
- Hold the Test Bulb Tool on the contact points when test the shock function.
- If the product responds as described above, you’ve succeeded at setting up the Bark Control Collar properly.
- 2^ Put the Product on Your Dog
- Note: have a look if you have a small dog! Please ensure to fit the product snugly, yet loose enough to allow one finger to fit between the strap and your dog’s neck.
- If the product responds as described above, you’ve succeeded at setting up the Bark Control Collar properly.
- (3^ Mode Setting
- The following instruction will guide through the process of switching modes.
- Power on the product by pressing and holding the Power Button for 2 seconds
- Press the Mode Button to switch modes, modeicons will be changed according in display
- Modes:
Indicator & Display
Mode Icons
Battery Icon
- Battery bar indicates battery levels
Protection Mode
Indicators
Test Mode
- When the product is set on Test Mode, the digit shows 0 and will shows 5 after test completed or if test isnot conducted within 5 seconds.
Sensitivity Level
- Adjust the sensitivity level from 1-5 by pressing the Power Button Level 5 is the most sensitive and level 1 is the least.
How It Works
Icon Description:
- Variable
- Warning Tone Vibration
- Shock
NOTES:
- The product will go to next step if your dog keeps barking within 1 minute.
- Theproductwill automatically go back to Step l if it is not activated within 1 minute.
FAQS
Frequently Asked Questions Answers
- Q: Why doesn’t the product work when the dog barks?
- A: Please first ensure to fit the product snugly, yet loose enough to allowonefingertofitbetween the strap and your pefs neck. Some dogs has weak barking, in this caseyouwillneed to level up the sensitivity level. Thick coat on the neck area may alsohavesmallchanceto decrease the sensing from the barking, trim the coat near the area where youplacetheproduct. is the product triggered sometimes in a noisy environment thoughgisn’tbarking?
- A: Though we have optimized the barking detection to the best, some environmentnoisesmay have similar frequency to barking, which may have small chance to activatetheproduct.Please lower the sensitivity level.
- Q: Can I use the product when there are other dogs playing around?
- A: Dogs will bark when playing and get excited, for the comfort and safetyof yourpet,wedon’t suggest using this product in such environment.
- Q: How do I know if I can use this product for my pet?
- A: The product is designed for healthy dogs over 6 months old. Most importantly, this product cannot be used on unhealthy or aggressive dogs, andifyouare unsure whether this product is appropriate for your pet, please consult your veterinarianor a certified trainer.
- Q: Can this product stop my dog*s howl?
- A: No, this Bark Control Collar is designed to detect the barking only. It cannot detectorstopthe howling.
- Q: Can I charge this product with any type of charger?
- A: No, you are suggested to charge this product with charger of 5Voutput voltage, becausecharger with output voltage of 9V or 12V may cause damage to the product. Theproductwillstop charging automatically if input voltage becomes too high and deliver warningtone.
- Q: Will my dog stop barking completely?
- A: The Bark Control Collar effectively and humanely stops all barking whenit isworn.Itshould only be worn during periods of unwanted barking.
- Q: ls the Bark Control Collar safe and humane?
- A: Yes. The Bark Control Collar is designed to get your dog’s attention, not topunishhim.However, the initial Static Shock correction may startle your dog
- Model: S1
- Version: 2.0
- Made in P.R.C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>