KICKER TW1 True Wireless ENC Earbuds Owner’s Manual

KICKER TW1 True Wireless ENC Earbuds

Product Information

Specifications

• Model: TW2
• Charging Time: 2.5 Hours
• Touch Sensor: Yes
• Audio Controls: Yes
• FCC ID: RGR-BTLREMAA, RGR-KTWS1, RGR-KTWS2
• Certifications: FCC, C22.2 No.60065

Product Usage Instructions

Charging

1. Connect the charging cable to the charging port of the TW2 earbuds.
2. Plug the other end of the charging cable into a power source.
3. Allow the earbuds to charge for approximately 2.5 hours until fully charged.

Pairing

1. Turn on the TW2 earbuds by pressing the power button.
2. Select “TWS1 KICKER” or “TWS2 KICKER” on your device’s Bluetooth settings to pair with the earbuds.

Inserting and Adjusting Earbuds

1. Gently insert the earbud into your ear canal.
2. Rotate the earbud slightly while pushing it in for a secure fit.
3. If the fitment is unsatisfactory, try using a different ear tip (TW2) for a better fit.
4. To remove the ear tip, squeeze and twist it until it detaches from the earbud.

Using Touch Sensor

The TW2 earbuds feature a touch sensor for audio controls:

• Double tap to play/pause audio.
• Triple tap to skip to the next track.
• Tap and hold for 2 seconds to activate the voice assistant.

FCC Compliance

This device complies with Part 15 of the FCC rules. To ensure proper operation and prevent interference:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to a different circuit than the receiver.
• If experiencing issues, consult a dealer or an experienced radio/TV technician for assistance.

FAQ

• Q: How long does it take to charge the TW2 earbuds?
• A: The TW2 earbuds take approximately 2.5 hours to fully charge.
• Q: How do I pair the TW2 earbuds with my device?
• A: Turn on the earbuds and select “TWS1 KICKER” or “TWS2 KICKER” on your device’s Bluetooth settings.
• Q: How do I adjust the fit of the earbuds?
• A: Gently insert the earbud into your ear canal and rotate it slightly while pushing for a secure fit. If the fitment is unsatisfactory, try using a different ear tip (TW2).
• Q: How do I control audio playback with the TW2 earbuds?
• A: Use the touch sensor on the earbuds. Double tap to play/pause, triple tap to skip to the next track, and tap and hold for 2 seconds to activate voice assistant.
• Q : What should I do if I experience interference with the TW2 earbuds?
• A: Follow the FCC compliance guidelines mentioned in the user manual. Reorient or relocate the receiving antenna, increase the separation between equipment and receiver, or consult a professional for assistance.

what is in the box

Scan here for the owner’s manual Escanee aquí para manual del propietario

Charging

Using instruction

• Select “TWS1 KICKER” or “TWS2 KICKER” to pair. Seleccione “TWS1 KICKER” o “TWS2 KICKER” para emparejar

• Insert earbud, and gently turn while pushing. If fi tment is unsatisfactory, please try a different ear tip (TW2). Inserte el auricular y gírelo suavemente mientras
  empuja.Si el accesorio no es satisfactorio, pruebe con una punta de oreja diferente (TW2).

• Squeeze and twist to remove tip (TW2). Apriete y gire para quitar la punta. (TW2).

• See owner’s manual for earbud reset instructions. Consulte el manual del propietario para obtener instrucciones para restablecer el dispositivo

FCC CAUTION

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A
PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES

• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
• CONNECT THE EQUIPMENT TO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.

FCC ID: RGR-BTLREMAA RF WARNING FOR MOBILE DEVICE

THIS EQUIPMENT COMPLIES WITH FCC RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. THIS EQUIPMENT SHOULD BE INSTALLED AND OPERATED WITH A MINIMUM DISTANCE OF 20 CM BETWEEN THE RADIATOR AND YOUR BODY.

• FCC ID: RGR-KTWS1
• FCC ID: RGR-KTWS2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>