H Koenig hsx16 Slow Horizontal Juicer Instruction Manual

: June 5, 2024
: H Koenig

Table of Contents

Safety Warning
Components and Functions
Operation methods
Operation Procedure
Cleaning of the juice extractor.
Safety Index
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

hsx16 Slow Horizontal Juicer
Instruction Manual
https://goo.gl/fw5nnz

Safety Warning

Power of AC220-240V~/50Hz shall be supplied to this product. Please confirm your power supply before use.
Be sure to disconnect the power supply before disassembly/re-assembly of or adjustment to this product.
This product is intended for a Y connection; in case of any damage to the flexible wire, to avoid any hazard, contact our customer service or send it to our authorized service station for replacement, and do not try to disassemble it without our authorization.
Prior to use, please check the power cable, plug, filter, auger, feeding chute, and other parts, and in case of any damage, stop using this product and contact our customer service immediately without unauthorized disassembly or repair to avoid any potential hazard.
For the need of any repair during use, contact our customer service or send it to our authorized service station without unauthorized disassembly or repair to avoid any potential hazard.
Prior to operating this product, make sure that any such removable parts as the feeding chute, auger, filter, and end cap have been mounted in place.
During operation, do not put your finger or any other sharp object into the feeding chute to touch the auger or any other rotating part, so as to prevent any personal injury or damage to this product. Do not use any object in place of the feeding rod. Do not keep your eye close to the feeding chute to avoid any accident.
The food material needs to be cut into proper pieces so as to pass through the feeding chute to extract Please remove the hardcore, seed, skin, or shell of the food before use.
The proper amount of force shall be used to push the food material in, not excessive but sufficient to have it cut off exactly.
The filter, end cap, auger or feeding chute may be dyed by the juice during operation, which is a normal phenomenon and has no effect on edibility and does no harm to health.
This product has safety protection after a long time of use more than 20min, it will stop automatically. And in such case, rest it for 20-30 minutes before restarting it, so as to cool the motor down and prolong the product service life
In case that current limit protection is triggered or the motor is locked and stops automatically, disconnect the power supply and keep the switch in position “off”, and press Rotate Backwards button on the power switch, and then discharge the food material and then press Rotate Forwards to restart the machine. If the problem continues, it is recommended to remove any food material inside the feeding chute before restarting so as to protect the motor.
Upon completion, remove any removable part only after the motor/auger has stopped rotating and the power has been disconnected.
Any part in contact with food material is clean, safe, and reliable in compliance with related food hygiene codes.
Do not put the machine into or use water or any other liquid for washing, so as to prevent any damage.
Do not use any steel wool, abrasive cleaning agent, or corrosive liquid such as gasoline or acetone to clean this product.
This product shall be stored in a place out of the child’s reach and inaccessible to any physically/mentally disabled or poorly experienced/intellective persons (including children).
This product is intended for use by individuals or families.
Never feed food by hand. Always use a food pusher
Do not use fingers to scrape food away from the discharge disk while the appliance is operating. Cut type injury may result
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Do not use outdoors.
Do not move the appliance when in use.
Unplug from the main power socket when not in use.
Do not submerge the main unit in water
Do not sterilize any accessories of the appliance using hot water with a temperature higher than 176 ˚F (80 ˚C) or a microwave oven. The unit may get overheated, deformed and damaged
FOR HOUSEHOLD USE ONLY.
Do not attempt to repair the appliance. Contact a qualified service technician.
A short power-supply cord is provided to reduce the hazards resulting from entanglement or tripping over a long cord. Do not use an extension cord as it can be pulled on by children causing the unit to tip over
Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
Keep the appliance and its power cord out of reach of children under 8 years of age.
When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
Make sure that the voltage rating on the typeplate corresponds to the main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
Never leave the unit unattended while in operation.
Please keep this document at hand and give it to the future owner in case of transfer of your device
Do not use outside.
The device is not intended to be operated by external timer means or a remote control system
The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.

Components and Functions

H Koenig hsx16 Slow Horizontal Juicer - figure 1

Operation methods

No.| Component
Name| Function Description
---|---|---
1| Power Cable| For connection to the power supply.
2| Housing| The main unit contains a motor and other components, providing power output.
3| Locking ring| Press down of this ring to lock the feeding chute -locks the parts in place during assembly
4| On/off knob| Up:on / neutral:off /down:reverse
5| Pushrod| used for pushing ingredients close to the Spiral Pusher for higher juice extraction
6| Hopper| used for holding ingredients prior to juicing
7| Feeding chute| -food ingredients are fed through the chute to be processed
8| Auger| used for incorporating and grinding the ingredients
9| Filter| filters juice through a mesh strainer (used for vegetables and fruits)
10| Endcap| safety feature that ensures proper assembly The fruit pulp comes out from this part
11| Juice baffle| To separate juice foam from the container.
12| Juice Container| -used for collecting the extracted juice
13| Residue
Container| used for collecting the pulp (from juicing)

Prior to first use, thoroughly clean any parts in contact with food material.

| Button Operation Description:
• Rotate Forwards button: start work
• “0” button: To stop and shut down the machine.
• Reverse button: For use in case of residue blockage or motor locking. (Tips: in case of residue blockage or motor locking, press and hold Rotate Backwards button for approximately 3 seconds to rotate the auger reversely and then release it; press Rotate Forwards button to resume normal operation.
---|---

Operation Procedure

Operate this product by following the steps below:

| 1| Lift locking ring (2) and insert feeding chute (1) into the main body. Then press down locking ring(2) to fix
---|---|---
| 2| Align the metal rod of the auger with the opening in the Main Body.
Push it in. If the auger will not go in all the way, slightly rotate it and try again.
| 3| With the wide opening first, align the notches on a filter to the openings in the feeding chute. Push it in.
| 4| While pushing the end cap into the feeding chute, align the notches on the end cap to the openings in the feeding chute.
Turn the Juicer Cap counterclockwise
| 5| Place juice container underfeeding chute with its opening right below the outlet. (juice baffle should be mounted in the container in advance to separate foam in the juice)
| 6| Place the pulp container below the end cap outlet, and close the juice container.
| 7| Install the hopper on the upper end of the feeding chute.
The hopper can make the feeding of food ingredients more convenient, particularly when small-particle food ingredients like grapes and strawberries are processed
| 8| Connect to the power supply and get ready for operation.
(Before power-on, make sure the knob is in the Off position.)
| 9| Clean the food and cut it into pieces small sufficiently to pass through the feeding chute, and place them onto the hopper.
• Any hardcore, seed, skin, or shell shall be removed in advance.
| 10| • Froward: start to work
• Off: power-off, stop the work
• Reverse: rotate in the reverse direction to solve food stuck problem
| 11| Load the food material in through the inlet and push them in with propelling rod.
• Proper amount of force shall be used to push the food the material in, not excessive but sufficient to have it cut off exactly. (Do not put your finger or any other object into the inlet! If the residue/juice container is full, disconnect the power supply and clear it up before restarting.）

Cleaning of the juice extractor.

Before cleaning this product, be sure to shut down the switch to disconnect the power supply.
Clean this product after using it.
The main unit cannot be washed with water and must be cleaned with a twisted wet cloth instead.
Before storing it, make sure this product is clean and dry.
Disassemble this product to wash the components by following the steps below:

| | First, lift up the pushrod and hopper
---|---|---
| | First, lift up the pushrod and hopper
| | After removing the feeding chute assembly, detach the end cap in a clockwise direction, then take out the filter and auger in the turn. All removable components can be washed with water.

Safety Index

Rated Voltage	220-240V—
Rated Power	150W
Rated Frequency	50Hz
Continuous Operating Time	510 minutes
Interval Time	?AO minutes

Environment
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05