TRL MANUAL

TRL 32 Inch Built in Grill

LINE DRAWINGS

INSTALLATION INSTRUCTIONS & OWNER’S MANUAL

NAME: TRL 32”/ TRL 38”/ TRLD 44”
PART #: TRL32/ TRL38/ TRLD44

Natural gas & liquid propane configuration
THANK YOU
Thank you for your purchase. We’d like to welcome you to the Summerset family of luxury outdoor kitchen products and look forward to being a part of your home for years to come. As a family business with over 30 years of industry experience, we aim to deliver exceptional quality and personal service. Welcome to the Summerset family and we hope you love your new grill!
FOR YOUR RECORDS
Please record the following information and refer to it when contacting Summerset Professional Grills or an authorized dealer. The serial number is located on the rating plate. The rating plate is located on the exterior basin of the grill (fire box) and on the underneath side of the drip tray (select models only).
For warranty information and to register your grill visit, amddirect.com/register
To view on your phone, scan the QR code on your smart phone’s camera app. (For Android devices, use Google Lens.)

http://amddirect.com/register

INSTALLER:
Please leave this manual for the owner
Serial Number:……………………………
Model:……………………………………….
Date of Purchase:………………………..
Place of Purchase:……………………….

WARNING!
READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE USING YOUR GRILL TO REDUCE THE RISK OF:
Fire, burn hazard, personal injury or property damage, improper installation or electric shock.
WARNING!
THIS PRODUCT IS DESIGNED FOR OUTDOOR USE ONLY
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read this manual thoroughly before installation, use, or servicing of this product.
WARNING!
CODE AND SUPPLY REQUIREMENTS:
This grill must be installed in accordance with local codes and ordinances, or, in the absence of local codes, with the latest National Fuel Gas Code (ANSI Z223.1/ NFPA 54), or Natural Gas and Propane Storage and Handling Installation Code (CSA-B149.1)
DANGER!
IF YOU SMELL GAS:
Shut off all gas supply lines to the grill.
Extinguish any open flame.
Carefully open the lid. Remember, it may be extremely hot!
If odor continues, keep everyone away from the grill and immediately call your gas supplier or your fire department.
WARNING!
CALIFORNIA PROPOSITION 65
This product can expose you to chemicals including Chromium which is known to the State of California to cause cancer and birth defects or other reproductive harm. California law requires businesses to warn customers of potential exposure to such substances. To minimize exposure to the substances, always operate this unit according to the use and care instructions found in this manual. Be certain to provide adequate ventilation when cooking.
WARNING!
EXPLOSION HAZARD:
DO NOT use the grill as a storage area for flammable materials. Keep area clear and free from combustible materials, gasoline, and other flammable vapors and liquids. Failure to do so can result in death, explosion, or fire an LP cylinder not connect for use shall not be stored in the vicinity of this or any other appliance.
WARNING!

• The outdoor cooking gas appliance and its dedicated shutoff valve must be disconnected from the gas supply piping system during pressure testing of that system at test pressures in excess of .5 psi (3.5kPa).
• The outdoor cooking gas appliance must be isolated from the gas supply piping system by closing its dedicated manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than .5 psi (3.5kPa).

WARNING!
STATE OF MASSACHUSETTS

• Massachusetts requires all gas be installed using a plumber or gas fitter carrying the appropriate Massachusetts license.
• All permanently-installed natural gas or propane installations require a  T” handle type manual gas valve be installed in the gas supply line to this appliance.
• This does not apply to portable propane installations using a 20 pound cylinder.

WARNING!
SAFETY AND INSTALLATION WARNINGS

• Please read all instructions before installation or operating your gas grill to prevent injury and appliance damage
• All gas grills will get hot during use. Use extreme caution when operating the grill
• Do not touch hot surfaces. Always use the handle to open or close the grill
• Never use dented, rusty or damaged propane cylinders. Never store additional or empty propane cylinders in the grill cabinet or in the vicinity of this or any other appliance
• Close supervision is necessary when this or any appliance is used near children. Keep children away from the grill during operation and until the grill has cooled off
• Children should never be left alone or unattended in an area where a grill is located. Place your grill well away from areas where children play. Do not store items that may interest children in or around the grill, in the cart, or in the masonry enclosure
• Never move the grill when hot. When in use, portions of the grill are hot enough to cause severe burns
• Always maintain the required clearances from combustibles as detailed. The grill is designed for outdoor use only. Never use in a garage, building, shed, breezeway, or other enclosed area. Do not use this grill under any unprotected overhead combustible construction
• Gas grills are not designed or certified for and are not to be installed in or on recreational vehicles, portable trailers, boats or any other moving installation
• Always have an ABC Fire Extinguisher accessible — never attempt to extinguish a grease fire with water or other liquids
• Store your grill in a well-ventilated area. If stored indoors, detach and leave L.P. cylinder outdoors in a well-ventilated area away from heat and away from where children may tamper with it
• Keep any electrical supply cords and the fuel supply hoses away from any heated surfaces. Electrical cords should be placed away from walkways to avoid tripping hazard
• Do not repair or replace any part of the grill unless specifically recommended in this manual. Other service should be performed by a qualified technician
• If the grill is installed by a professional installer or technician, be sure that he/she shows you where your gas supply shut-off is located. All gas lines must have a shut-off that is readily and easily accessible. If you smell gas, check for gas leaks immediately. Check only with a soap and water solution. Never check for gas leaks with an open flame
• Do not twist the gas supply hose
• Inspect the L.P. gas supply hose prior to each use of the grill. If there is evidence of excessive abrasion or wear, or the hose is cut, it must be replaced before using the grill
• The use of accessories, regulators, or components are not recommended by the appliance manufacturer and may cause injuries and will void warranty
• Never light the grill with the hood closed and be certain the burners are positioned and seated over the gas valves and on the burner support
• Never lean over the cooking surface when lighting or operating the grill
• Use barbecue tools with wood handles and insulated oven mitts when operating the gril
• Be sure the gas supplied to the grill conforms to the model you purchased. A natural gas grill requires natural gas to operate; a liquid propane grill requires liquid propane to operate
• Never connect the appliance to an unregulated gas supply line. Grills operated without a regulator are unsafe and will not be serviced until installed properly and safely. Unsafe operation without a gas regulator will void the warranty
• Grills operating with natural gas must be installed with the NG regulator supplied with the unit and set to 4.0” of water column pressure
• Grills operating with liquid propane must be installed with an LP regulator and set to 11” of water column pressure

REPLACEMENT PARTS LIST

Item| DESCRIPTION| TRL 32”| QTY| TRL 38”| QTY| TRLD 44”| QTY
---|---|---|---|---|---|---|---
1| TOP HOOD| HOOD-TRL32| 1| HOOD-TRL38| 1| HOOD-TRLD44| 1
2| IR BACK BURNER COVER| BBE-COV-SS| 1| BBE-COV-SS| 1| BBE-COV-SS| 1
3| BACK BURNER IGNITOR ELECTRODE| BBE-SS| 1| BBE-SS| 1| BBE-SS| 1
4| BACK BURNER IGNITOR WIRE| BBW-TRL32| 1| BBW-TRL38| 1| BBW-TRLD44| 1
5| IR BACK BURNER| IR-BACKBURN-LG| 1| IR-BACKBURN-LG| 1| IR-BACKBURN-LG| 1
6| REAR HOOD| REAR HOOD-TRL32| 1| REAR HOOD-TRL38| 1| REAR HOOD-TRLD44| 1
7| LEFT LIGHT BOX| LIGHT SS-L| 1| LIGHT SS-L| 1| Light SS-L| 1
8| HALOGEN LIGHT BULB| LIGHT BULB-SS| 2| LIGHT BULB-SS| 2| LIGHT BULB-SS| 2
9| LIGHT BRACKET| HEAT SHIELD-TRL| 1| HEAT SHIELD-TRL| 1| HEAT SHIELD-TRL| 1
10| RIGHT LIGHT BOX| LIGHT SS-R| 1| LIGHT SS-R| 1| LIGHT SS-R| 1
11| BACK BURNER ORIFICE| BBO-SS| 1| BBO-SS| 1| BBO-SS| 1
12| BACK BURNER ORIFICE ELBOW| BBO-SS-ELBOW| 1| BBO-SS-ELBOW| 1| BBO-SS-ELBOW| 1
13| WARMING RACK| WARM-TRL32| 1| WARM-TRL38| 1| WARM-TRD44| 1
14| GRATES| GRATE-TRL32| 3| GRATE-TRL38| 4| GRATE-TRLD-L(5)S(1)| 5+1
15| BURNER COVERS W/BRIQUETTES| BRNCOV-TRL-LG| 3| BRNCOV-TRL-LG
BRNCOV-TRL-SM| 2
2| BRNCOV-TRL-LG| 4
16| MAIN BURNERS| UTUBE-TRL| 3| UTUBE-TRL| 4| CAST-TRL| 4
17| BASIN/FIRE BOX| BASIN-TRL32| 1| BASIN-TRL38| 1| BASIN-TRLD44| 1
18| CRUMB TRAY| CRUMB-TRL32| 1| CRUMB-TRL38| 1| CRUMB-TRLD44| 1
19| BASIN FRAME| N/A| 1| N/A| 1| N/A| 1
20| DRIP TRAY| DRIP-TRL32| 1| DRIP-TRL38| 1| DRIP-TRLD44| 1
21| TRANSFORMER| TRANS-SS| 1| TRANS-SS| 1| TRANS-SS| 1
22| TRANSFORMER WIRE| TRANS WIRE-NEW| 1| TRANS WIRE-NEW| 1| TRANS WIRE-NEW| 1
24| LP REGULATOR W/ HOSE| REG HOSE LP| 1| REG HOSE LP| 1| REG HOSE LP| 1
25| LP REGULATOR FITTING| REG FIT-LP| 1| REG FIT-LP| 1| REG FIT-LP| 1
26| REGULATOR BRACKET| REG BRAK| 1| REG BRAK| 1| REG BRAK| 1
27| NG REGULATOR| REG-TRL-NG| 1| REG-TRL-NG| 1| REG-TRL-NG| 1
28| NG REGULATOR FITTING| REG FIT-NG| 1| REG FIT-NG| 1| REG FIT-NG| 1
29| FLEX TUBE FOR MANIFOLD| FLEX TUBE-MAN| 1| FLEX TUBE-MAN| 1| FLEX TUBE-MAN| 1
30| MANIFOLD| MAN-TRL32| 1| MAN-TRL38| 1| MAN-TRLD44| 1
31| VALVE GASKET SEAL| O-RING| 4| O-RING| 5| O-RING| 5
32| BACK BURNER VALVE| BBV-SS| 1| BBV-SS| 1| BBV-SS| 1
33| MAIN BURNER VALVE| MV-SS| 3| MV-SS| 4| MV-SS| 4
34| IR BACK BURNER FLEX TUBE| FLEX TUBE-BB-TRL32| 1| FLEX TUBE-BB-TRL38| 1| FLEX TUBE-BB-TRLD44| 1
35| KNOB BEZEL| KNOB BEZEL LG| 4| KNOB BEZEL LG| 5| KNOB BEZEL LG| 5
36| CONTROL KNOBS| KNOB LG| 4| KNOB LG| 5| KNOB LG| 5
37| LOGO PLATE| LOGO PLATE-SS| 1| LOGO PLATE-SS| 1| LOGO PLATE-SS| 1
38| LIGHT SWITCHES FOR INTERIOR LIGHTS| SWTCH-LIGHT-SS| 1| SWTCH-LIGHT-SS| 1| SWTCH-LIGHT-SS| 1
39| LIGHT SWITCHES FOR LED LIGHTS| SWTCH-LIGHT-SS| 1| SWTCH-LIGHT-SS| 1| SWTCH-LIGHT-SS| 1
40| FRONT CONTROL PANEL| FRONT-TRL32| 1| FRONT-TRL38| 1| FRONT-TRLD44| 1
41| LED WIRE HARNESS| LED WIRE-TRL32| 1| LED WIRE-TRL38| 1| LED WIRE-TRLD44| 1
42| LED BULB| LED BULB-SS| 1| LED BULB-SS| 1| LED BULB-SS| 1
43| HEAT SEPARTORS| HEAT SEP-TRL| 2| HEAT SEP-TRL| 3| HEAT SEP-TRLD| 1
45| ROTISSERIE MOTOR BRACKET| ROT-MOT-BRAK-SS| 1| ROT-MOT-BRAK-SS| 1| ROT-MOT- BRAK-SS| 1
46| ROTISSERIE MOTOR| ROT-MOT| 1| ROT-MOT| 1| ROT-MOT| 1
47| ROTISSERIE HANDLE| ROT HAND| 1| ROT HAND| 1| ROT HAND| 1
48| ROTISSERIE SPIT COLLAR| ROT COLLAR| 1| ROT COLLAR| 1| ROT COLLAR| 1
49/50| ROTISSERIE FORKS| ROT FORKS| 2| ROT FORKS| 2| ROT FORKS| 2
51| ROTISSERIE SPIT| SPIT-TRL32| 1| SPIT-TRL38| 1| SPIT-TRLD44| 1
52| HOOD HANDLE| HOOD HAND| 1| HOOD HAND| 1| HOOD HAND| 1
53| HOOD HANDLE SPACER| HHS-SS| 2| HHS-SS| 2| HHS-SS| 2
54| HOOD HANDLE END CAP| HHEC-SS| 2| HHEC-SS| 2| HHEC-SS| 2
55| HOOD BUMP| HOOD BUMP SS| 2| HOOD BUMP SS| 2| HOOD BUMP SS| 2
56| TEMPERATURE GAUGE| TEMP| 1| TEMP| 1| TEMP| 1
57| TEMPERATURE GAUGE BEZEL| TEMP BZL| 1| TEMP BZL| 1| TEMP BZL| 1

EXPLODED VIEW

BEFORE GRILLING

SHIPMENT ARRIVING DAMAGED:
VISIBLE DAMAGE
If your shipment arrives with visible damage to the box/carton, be sure the damage is noted on the bill of freight or express receipt and signed by the person making the delivery. File claim for damages immediately, regardless of the extent of damage.
CONCEALED DAMAGES
If damages are unnoticed until the grill is unpacked, notify the transportation company or carrier immediately and file a concealed damage claim with them. This should be done within (5) days of the delivery date. Be sure to hold on to the box/carton for inspection. We cannot assume responsibility for damage or loss incurred in transit.
TESTING FOR LEAKS
Create a soapy water solution of 1 part soap and 3 parts water. Confirm that all control knobs are in the off position. Turn on the fuel supply. For natural gas, turn the valve handle ¼ turn to align with the gas flow. For LP, turn the cylinder valve counter clockwise one full rotation. Apply the soap solution generously by paint brush or squirt bottle on all connections and fittings. If bubbles appear to grow on any of the connections, you have a gas leak. IMMEDIATELY turn off the gas supply. Wash off the soapy solution with cold water and dry. Tighten the loose joint or replace the faulty part with manufacturer recommended replacement parts. DO NOT attempt to repair the L.P. cylinder valve if it is damaged. The only way to safely resolve a damaged cylinder is to replace it by calling an authorized gas appliance service technician or an LP gas dealer. Repeat the leak test to ensure that no leaks are present. Do not use the appliance until the leak is corrected.
IMPORTANT NOTES:
BE MINDFUL OF WIND DIRECTION
When selecting a suitable location, consider important factors such as exposure to the wind and foot traffic patterns. If you have a freestanding grill, position it so the prevailing wind blows into the front control panel (at your back when grilling), allowing for proper front to rear airflow . Built-in grills located in areas with prevailing winds should be protected by a wind barrier, wind deflector, or wind guard. The grill is designed to pull in air from the front and exhaust through the rear of the unit. Winds hitting the back of the grill directly may cause problems. Be sure wind doesn’t blow into the hood gap, on the back of the grill just below the top of the lid when closed.
GAS LINE LENGTH
Keep all gas supply lines as short as possible. Gas lines lose pressure over distance and with each elbow or “t” fitting added. This drop in pressure affects grill performance.
PROPER LEVELING
PROPER LEVELING DURING INSTALLATION IS CRITICAL. A GRILL THAT IS OUT OF LEVEL WILL CAUSE ERRATIC BURNER COMBUSTION AND INEFFICIENT, UNEVEN HEATING. THE GRILL SHOULD BE LEVEL IN ALL DIRECTIONS. ADJUSTMENTS MAY NEED TO BE MADE EACH TIME WHEN MOVING A FREESTANDING UNIT.
CONSTRUCTION ZONES
Keep all stainless steel products away from construction zones. Construction debris such as (but not limited to) stone dust, stucco, and lime dust could damage or permanently discolor stainless steel products. Keep all caustic chemicals including chlorine and pool cleaning products away from stainless steel at all times.

INSTALLATION

CUT OUT DIMENSIONS

OVERALL PRODUCT DIMENSIONS

ALL BBQ ISLANDS MUST BE MANUFACTURED FROM “NON COMBUSTIBLE” MATERIAL. IF COMBUSTIBLE MATERIAL IS BEING USED, A SUMMERSET GRILL LINER IS REQUIRED.
NOTE:
For the minimum clearances between the grill and any side or rear walls, your setup must fall within one (or more) of the following:
IMPORTANT NOTES:
Clearance between grill and strictly non- combustible wall (i.e. brick wall, Clearance Fig. 1). The grill must have a minimum of 4” right, left and rear clearance from any noncombustible wall. This allows for proper ventilation and helps prevent dangerous overheating.

Clearance between grill and protected combustible wall (i.e. a non-combustible wall in front of a combustible wall to serve as a barrier. This can be accomplished by brick or a metal stud finished with non-combustible substrate. Clearance Fig. 2). The grill must have a minimum of 14” right, left and rear clearance from the protected combustible wall. (The 4” non-combustible material clearance, plus an additional 10” clearance between the grill and protected wall.)

SIDE AND REAR WALL CLEARANCES
Clearance between grill and combustible wall (Clearance Fig. 3). The grill must have a minimum of 18” right, left and rear clearance from any combustible wall.

BACK SPLASH CLEARANCE (IF APPLICABLE)
If a non-combustible backsplash exists, it must have a minimum of a 4” clearance from the rear of the grill (to allow for proper ventilation and help prevent dangerous overheating. Clearance Fig. 4).

IMPORTANT NOTES:
This 4” backsplash clearance must first be met prior to any non-combustible walls beginning behind it.
OVERHEAD CONSTRUCTION AND EXHAUST HOOD REQUIREMENTS
This grill is designed for outdoor use only. DO NOT use this grill inside a building, garage, or enclosed area. DO NOT use this grill in or on a recreational vehicle or boat.
When installing this grill in a combustible surround, a Summerset insulating jacket/grill liner must be used.
A minimum five (5) foot clearance is required between the countertop and the overhead construction.
When installed under combustible overhead construction, the area above the cooking surface of the grill must be covered with an exhaust hood. The exhaust hood provides the protection for the combustible overhead construction.
IMPORTANT NOTES:

• DO NOT use this appliance under unprotected combustible overhead construction.
• When installed under overhead noncombustible construction, an exhaust hood is highly recommended.

EXHAUST HOOD REQUIREMENTS
When using an exhaust hood, the area above the cooking surface of the grill must be covered with a hood larger than the cooking area of the grill, AND with a minimum of 1200 CFM (cubic feet per minute) for proper outdoor application.

Combustible Overhead Construction: Exhaust hood required.
Non-Combustible Overhead Construction: Exhaust hood is highly recommended.
UNPACKING YOUR GRILL
Included with your TRL grill are the following loose items:
Cooking Grates: TRL32(3),TRL38(4), TRLD44(5)
Burner Covers: TRL32(3),TRL38(4), TRLD44(5)
Warming Rack: TRL32(1), TRL38(1), TRLD44(1)
Drip Tray: TRL32(1), TRL38(1), TRLD44(1)
Heat Zone Separators: TRL32(2), TRL38(3), TRLD44 (3)
Rotisserie Kit: TRL32(1), TRL38(1), TRLD44(1)
Conversion Kit:

• Set of orifices
• If grill is factory set LP, NG orifices will be included
• If grill is factory set NG, LP orifices will be included
• The drip tray will be at the bottom of the unit and will slide into the drip tray support brackets.
• Above the heat shields are the Stainless Steel Burners (already installed).

The burner covers or briquette trays are above the burners and attach to the mounting pegs located inside the firebox.
The cooking grates are placed above the burner covers and finally the warming rack is placed on the mounting tabs on upper back

GAS REQUIREMENTS

NATURAL GAS AND LIQUID PROPANE REQUIREMENTS
WARNING!
GAS LINES
Never connect a high pressure gas line directly to the grill. A pressure regulator must be installed on all gas equipment. Removing or failing to install the pressure regulator can result in fire and serious personal injury and will void the warranty
MINIMUM PRESSURE REQUIREMENTS
Ensure the gas supplied meets the minimum pressure requirements. See below table for gas requirements measure in water column (w.c.) pressure:

Both the regulator and burner orifices have been tuned for the type of gas specified on the rating plate. Converting to a different type of gas requires a conversion kit. Conversion kits are included with this grill and located with the manual. Converting gases may require additional parts not included with this grill. (See Gas Conversion section for details).
IMPORTANT:
All installation and all installation parts must conform to local codes with the National Electrical Code, ANSI Z223.1/ NFPA 70 latest edition and the National Fuel Gas Code ANSI Z223.1/NFPA 54 in the U.S. and CGA-B149.1/.2 in Canada
NATURAL GAS REQUIREMENTS
• Done by a qualified professional only

1. Check the Rating Plate to make sure the gas supply you are hooking up to is the gas type the grill is manufactured for.
2. To ensure satisfactory performance, the gas supply line must be sized to accommodate the total BTU requirements of all the gas-fire equipment that will be connected to that line.
3. In no case should pipe less than 1/2” inside diameter or 1” outside diameter ever be used to connect this product.
4. For built in enclosure, a single vent is required on opposite sides to create cross-ventilation. Vent may be positioned on the upper or lower level side of the enclosure.

NOTE: DO NOT use any tape, pipe dope or threading compound on any flare fitting This will cause a clog in the regulator and prevent your grill from functioning properly.
CONNECTING TO THE NG REGULATOR

LIQUID PROPANE TANK REQUIREMENTS
Turn off the gas at the supply when grill is not in use.
Please ensure:

• The LP gas tank has a shutoff valve, terminating in an LP gas supply tank valve outlet that is compatible with a Type 1 tank connection device. The LP gas tank must also have a safety relief device that has a direct communication with the vapor space of the tank.
• The tank supply system must be arranged for vapor withdrawal.
• The LP gas tank used must have a collar to protect the tank valve.

Never connect an unregulated LP gas tank to your gas grill. The gas regulator assembly supplied with your gas grill is adjusted to have an outlet pressure of an estimated 11” water column (W.C.) for connection to an LP gas tank.

• Use a standard 20 lbs. LP tank with QCC – 1 fitting
• Grills set up for LP gas come equipped with an LP hose regulator assembly for connection to a standard 20 lbs. LP cylinder (Type 1)

CONNECTING TO THE LP TANK
The hose and regulator are connected in the following manner:

• Insert the regulator inlet into the cylinder valve and turn the black coupling nut clockwise until the coupling nut is hand tight. DO NOT over-tighten this connection.
• To disconnect the coupling nut, first make sure the main cylinder valve is turned off . Grasp the coupling nut and turn counter clockwise. The inlet will then disengage.

FILLING AND REFILLING LP GAS CYLINDERS
All purging and refilling of LP gas cylinders must be performed by qualified personnel in the LP gas industry. Never store a spare LP gas cylinder under or near this appliance.
Never fill the LP gas cylinder beyond 80 percent full. Failure to follow these instructions may result in explosion, personal injury or death.
LP gas grill models are designed for use with a standard 20 lb. liquid propane gas (LP) tank with type (1) valve connections. (Not included) Never connect your gas grill to an LP tank that exceeds this capacity. A tank of approximately 12 inches in diameter by 18-1/2 inches high is the maximum size LP gas tank to use. A propane tank with an OPD (Overfill Prevention Device) must be used. This safety feature prevents the tank from being over-filled which can cause malfunction of the LP gas tank, regulator and/ or grill.
The LP cylinder must be constructed and marked in accordance with the specification for LP gas cylinders of the U.S. Department of Transportation (DOT) and designed for use with a Type 1 system only. Be sure to read and follow all LP connection instructions.
A dented or rusty LP cylinder may be hazardous and should be avoided. If in doubt, have it checked by your LP supplier. Always check for leaks after every LP cylinder change. (See Checking For Leaks)
Cylinders must be stored outdoors in a wellventilated area out of the reach of children. If your grill is stored indoors, the LP cylinder must be stored outside, in upright position and away from excessive heat.
IMPORTANT
All installation and all installation parts must conform to local codes with the National Electrical Code, ANSI Z223.1/ NFPA 70 latest edition and the National Fuel Gas Code ANSI Z223.1/NFPA 54 in the U.S. and CGA-B149.1/.2 in Canada
CONNECTING TO A SIDE BURNER
You will need a ‘T’ adapter fitting (not provided) or similar connection to connect a single gas line to both a side burner and a grill. We recommend a licensed gas technician install all gas lines. See figure for installation of a ‘T’ adapter.

LIQUID PROPANE INSTALLATION
NOTE: Ventilation is required in the enclosure on opposite sides to create cross-ventilation. Liquid propane is heavier than natural gas and vents should be located near the bottom of the enclosure.

WARNING!
Before lighting the burners, inspect the gas supply piping or hose. If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use. Always keep your face and body as far away from the grill as possible when lighting.

LIGHTING THE GRILL

Never operate the grill unattended. DO NOT OPERATE ROTISSERIE BURNER WITH WARMING RACK INSTALLED
Your Summerset Professional Grill is equipped with reliable, high-efficiency piezo ignition valves. Below are instructions for valve ignition and manual ignition lighting.
VALVE IGNITION
PLEASE Keep your face and body away from the grill top when lighting

• Open the hood before lighting; do not attempt to ignite burners while hood is  closed.
• Make sure gas supply is turned on.
• Make sure burner control knobs are in the “OFF” position.
• Press in the control knob then slightly turn the knob counterclockwise while still pressing in.
• Then in the above position after 5 seconds allowing the gas to reach the manifold (10 seconds for back burner).
• Turn the knob counterclockwise past the ignition to the high setting to ignite. You will hear the one time clicking sound of the spark ignition.
• After ignition, set the knob to the desired setting

NOTE:

1. If the burner doesn’t ignite, wait five (5) minutes before repeating steps 4-7.
2. DO NOT turn on more than one valve at a time.

MANUAL IGNITION
CAUTION: Always wait five (5) minutes for gas to clear after any unsuccessful lighting attempts.
Follow steps 1-4

1. Place a long lighter or match near the manual flash tube. For TRLD44 attach a long match to the lighting rod (match holder) and place near interior burner. For back burners, hold the flame against back burner.
2. Hold lighter or match flame near area for five (5) seconds. Then depress the appropriate control knob and while pressing, turn it counterclockwise to the HIGH position.
3. Remove the lighter or match when the burner lights and release the control knob.
4. If the burner does not light within five (5) seconds of turning the control knob, immediately depress the knob and turn the control knob to OFF. Wait five (5) minutes before repeating steps 2-4 of the MANUAL LIGHTING instructions.

NOTE: Keep the hood closed during the pre-heat period.
BEFORE LIGHTING ROTISSERIE BURNER
IMPORTANT: REMOVE THE WARMING RACK PRIOR TO TURNING ON THE ROTISSERIE BURNER. Turning the rotisserie burner on while the warming rack is installed will cause the warming rack to warp and void the warranty.

MAINTENANCE TIPS

PRE-HEATING THE GRILL
Pre-heating your grill every time you use it is extremely important. Pre- heating allows the briquettes to properly heat up, providing more even and more consistent cooking results. Preheat your grill by igniting all main burners. Then close the hood and allow the grill to heat for 10 to 15 minutes, the hood thermometer should reach approximately 450°. Once you’ve reached your desired pre-heat temperature, turn off the burners that you won’t be using to cook your food. Remember, surface temperature can be up to 200° higher.
SHUT OFF INSTRUCTIONS

1. To shut off the unit, depress each valve control knob and while pressing turn clockwise to the “OFF” position.
2. Always close the valve from the gas supply after each use of the unit.

NOTE: When using a portable propane tank: Propane tanks are equipped with a safety shutdown device that may cause low or no gas pressure/flame at the burners if operating and lighting instructions are not followed exactly.
CLEANING THE DRIP TRAY
The drip tray should be cleaned after each use. After the grill is completely cool, remove the drip tray by pulling it out until it stops, then lifting the front edge until the drip tray comes free. Clean it with hot soapy water or an oven-style cleaning product and re-install. When using an ovenstyle cleaning product be sure to carefully follow the manufacturer’s instructions. Many of these cleaners are toxic and can damage the stainlesssteel finish if not used properly. Also, check the tray after rain. If you’ve left the grill uncovered, you may need to remove the drip tray to drain the water from the tray.
LOW FLAME ADJUSTMENT

• To Adjust the Burner to a Low Setting Make sure the grill is cool
• Remove the racks so you can see the flames while adjusting the burner
• Light the burner and allow it to preheat on high for 3 minutes
• Turn the burner to “LOW”
• Pull off the control knob
• Use a flat head screw driver and adjust the “gold flathead screw” in the valve to the proper flame height

MAINTENANCE TIPS
STAINLESS STEEL NEEDS TO BE CLEANED?!?
ABSOLUTELY!
Stainless steel needs to be cleaned for aesthetic considerations and to preserve corrosion resistance. Stainless steel is protected from corrosion by a thin layer of chromium oxide. Oxygen from the atmosphere combines with the chromium in the stainless steel to form this passive chromium oxide film that protects from further corrosion. Any contamination of the surface by dirt, or other material, hinders this passivation process and traps corrosive agents reducing corrosion protection. Thus, routine cleaning is necessary to preserve the appearance and integrity of the surface.
GRILL EXTERIOR
Routinely wash with warm soapy water and apply stainless steel polish to protect grill exterior
GRILL INTERIOR

• Burn off excess food debris and marinades for 15 minutes after cooking
• Once the unit is cool, turn over the burner covers and burn the top side (the burner covers are reversible and are able to be mounted upside down for cleaning purposes)
• Use an approved stainless-steel oven cleaner to remove grease build up
• Routinely have a professional barbecue cleaning company detail the barbecue for best results and longevity

STAINLESS STEEL MAINTENANCE
After each use wipe down the exterior of the grill to remove grease and splatters. Use a commercially available stainless-steel cleaner to clean and polish the exterior surfaces. Doing these things on a regular basis minimizes the amount of effort required
When removing stubborn stains:

• Do not use metallic abrasives and always rub in the direction of the grain
• Some household cleaning products are not suitable for stainless steel; be sure to read the label before using on the grill
• Always use the mildest cleaning solution firs , scrubbing in the direction of the grain
• Specks of grease may gather in the grain of the stainless steel and bake on to the surface, giving the appearance of rust
• To remove these baked-on foods use a fine to medium grit non-metallic abrasive pad (Scotch Brite is good) in conjunction with a stainless steel cleaner
• Solutions used for cleaning concrete and masonry can be very corrosive and will ‘attack’ stainless steel
• Be sure your Summerset products are well protected before using these products

IMPORTANT NOTE: FOR LOCATIONS NEAR COASTAL AREAS AND POOLS

304 stainless steel materials used in the construction of your Summerset

Professional Grill are highly rust resistant, however, chlorine  in the air from swimming pools or the salt from sea air may cause surface rust to appear and even create some pitting if left on the product.
Here are a few tips to avoid this:

• Regularly wipe down the exterior surfaces with a damp cloth (micro fiber towels work well)
• Allow the surfaces to dry before installing the cover. Do not cover a damp grill
• In extreme environments apply a rust inhibitor which leaves a microscopic protective layer on the grill
• For seasonal storage use the product referred to above, ensure the grill is dry, then cover and secure the cover to minimize the amount of damp air getting to the surface

GRILL FEATURES

After your first use, certain areas of the grill may discolor from the intense heat given off by the burners – this is normal and cannot be cleaned off . For light and heavy food stains there are many different stainless steel cleaners available.
ROTISSERIE INSTALLATION
CAUTION: Light with grill hood open. When using the back burner, keep the grill lid closed to prevent heat loss, provide proper convection and provide proper venting, opening frequently to avoid hood warping. This will ensure even cooking temperatures.
When using the rotisserie with the hood open, be careful in windy conditions, always being mindful of heat dispersion.
Do not use the rotisserie motor in the rain. Do not leave the motor on the grill when not in use.

1. Remove the warming rack, cooking grates, and burner covers if necessary
2. Mount the rotisserie motor bracket on either side of the grill nearest the outlet
3. Slide the rotisserie motor onto the rotisserie motor bracket
4. Insert rotisserie spit (rotisserie rod) into motor
5. Place 1st fork onto the rotisserie spit and secure tightly
6. Position the meat onto the spit securing to the 1st fork
7. Place 2nd fork onto the spit securing to the meat and tighten screw
8. Insert collar onto spit
9. Screw on handle nut and handle
10. Add a drip pan beneath the meat to catch drippings and retain moisture in the meat
11. Light back burner per lighting instructions in this manual and close grill lid

IMPORTANT: : Turn the back burner to low or off when stopping the rotisserie to prevent over cooking
HEAT-ZONE SEPARATOR INSTALLATION
To install the heat zone separators, please insert the heat zone separators as shown in the figure below.

OPTIONAL DROP-IN SEAR BURNER INSTALLATION
The preferred location to install a drop-in sear burner is on the far left of the grill. This will allow for a sear zone while maximizing the main burner grilling space. To install a drop-in sear burner:

• Remove the grate and burner covers to access the main burner
• Remove the cotter pin in the rear securing the main burner (if necessary)
• Remove main burner
• Remove cross tube in between main burners allowing for drop-in sear burner to rest flat, if necessary
• Install sear burner with the center of the orifice positioned in the center of the burner and rest the back of sear burner flat on the rear of the grill. There is a locating pin in the rear of the sear burner that must be seated correctly.

LIGHTING OPTIONAL DROP-IN SEAR BURNER

1. Open the hood before lighting; do not attempt to ignite burners while hood is  closed.

2. Make sure gas supply is turned on.

3. Make sure burner control knobs are in the “OFF” position.

4. Press in the control knob then slightly turn the knob counterclockwise while still pressing in.

5. Hold in the above position for 5 seconds allowing the gas to reach the manifold.

6. Turn the knob counterclockwise past the ignition to the high setting to ignite.
   You will hear the one time clicking sound of the spark ignition.

7. After ignition, set the knob to the desired setting.

8. Using the main burner sear zone can cause extreme damage. 100% attendance to this style of cooking is required.

POWER FRONT PANEL LED
To power internal halogen and external LED lights, insert the trans wire (two prong connection) into the transformer. Plug the transformer into an electrical outlet rated for the transformer.

GOLD STANDARD WARRANTY

Your investment in AMD Direct products is backed by the strongest warranty in the industry. In addition to precision engineering and outstanding performance, AMD Direct products include our GOLD STANDARD LIFETIME WARRANTY with all replacement parts 100% non-prorated. Effective with purchases as of 3/1/23.
AMD Direct Warranty is valid for original purchaser at original site of delivery with proof of purchase and photo documentation only. Registration form must be submitted online within 30 days of the purchase date to validate the warranty. Warranty is void upon transfer of ownership. Warranty does not apply to products installed in any commercial, rental, or nonresidential application that have not maintained proper upkeep. Warranty covers replacement parts only. Manufacturer is not responsible for labor or labor- related costs. Warranty does not cover discoloration, surface rust, corrosion, or oxidation, which may occur due to harsh environments, chemicals, or overheating. Warranty will not apply for damage resulting from improper installations, abuse, extreme environments, grease fires, or misuse. Proof of regular and proper maintenance is required. Coastal, humid, and/or salt environments are subject to manufacturer review. All out-of-box claims must be made within 30 days of purchase and must be made prior to installation. Any product installed damaged will be considered damaged during installation and not covered under warranty. Warranty and registration forms are available at www.amddirect.com/register. Please be advised – all display models are sold “as is” and the warranty covers the following items only: main burners (Gold Standard Lifetime Warranty), grates (Gold Standard Lifetime Warranty), burner covers (Gold Standard Lifetime Warranty). All warranties are subject to the review and approval of the manufacturer.

AMD DIRECT GAS APPLIANCES (GRILLS, SIDE/POWER BURNERS, GAS GRIDDLE & OVEN)

• Gold Standard Lifetime Warranty on Construction and Manufacturer Defects
• Gold Standard Lifetime Warranty on Stainless Steel Construction
• Gold Standard Lifetime Warranty on Cooking Grates, Burners, Burner Covers, Valves, Flame Tamers, and Heat Zone Separators, Temperature Gauges, & Hood Springs
• Gold Standard Lifetime Warranty on Briquette Systems
• 3 Year Warranty on all Other Parts, Components, & Electrical, Including: LED Bulbs, Wire Harness, & Switches; Power Source Wire; Transformer; Interior Halogen Light Wire & Bulb

VENT HOODS, REFRIGERATION, COLD STORAGE & SINKS
VENT HOODS

• 5 Year Warranty on all Stainless Steel Construction
• 3 Year Warranty on Blowers, LED Lighting, Wiring Harness and Switches

15″ & 24″ REFRIGERATION MODELS

• 3 Year Warranty on all Construction Including Compressors
• 1 Year Warranty on Transformer, LED Bulbs, LED Harness, Power Source Wire, LED Switches, Interior Halogen Light Wire/Bulbs

21″ REFRIGERATION MODELS

• 1 Year Warranty on all Construction & Electrical Components Including Compressor, Transformer, LED Bulbs, LED Harness, Power Source Wire, LED Switches, Interior Halogen Light Wire/Bulbs

COLD STORAGE & SINKS

• Gold Standard Lifetime Warranty on Ice Chests
• Gold Standard Lifetime Warranty on Drains & Faucets

DRAWERS, DOORS, GRILL LINERS, & CARTS

• Gold Standard Lifetime Warranty on Construction, Workmanship and Materials for all Stainless Steel Parts, Including Doors, Drawers, Grill Liners, & Carts
• 3 Year Warranty on Electrical (Warming Drawers)

COVERS

• Gold Standard Lifetime Warranty on Covers, Including Grills, Carts, Side/Power Burners, Gas Griddle & Oven

COMMERCIAL APPLICATIONS
GAS GRILLS

• Gold Standard Lifetime Warranty on Workmanship, Construction, & Manufacturer Defects for All Commercial and/or Hospitality Applications
• Warranty is Void Upon Misuse, Including Lack of Regular Cleaning, Vandalism, or Theft
• Warranty is Valid Only if Regular Maintenance is Exercised. Due to the Nature of Commercial Applications (Multiple Users, Lack of Control of Use, etc.) Regular Maintenance is Mandatory

WE MAKE IT ALL
Summerset Professional Grills strives to meet every outdoor living expression. We offer a wide range of products from grills, refrigeration, sinks, accessories and more. Our goal is to ensure you have everything you need to create your perfect outdoor atmosphere. No matter the style or budget, Summerset will deliver an experience that will help create the ultimate backyard getaway.

ACCESSORIES
Summerset’s full line of stainless steal outdoor kitchen components makes sure you have everything you need for the perfect outdoor kitchen experience. Double-lined construction provides the extra insulation and resilience needed against the elements, soft closing drawers offer a luxurious feel, and a thicker flange provides a sturdy, seamless fit and elegant style that will work with any countertop and island finish

REFRIGERATION
Summerset offers a wide variety of luxury stainless steel refrigerators, wine coolers, and kegerators. With up to 6.6 cubic feet of storage, these appliances will help keep your food fresh, wine chilled, and beer flowing, bringing the function of your indoor refrigeration outside to join the party.

SINKS & BAR PREP
Take your outdoor kitchen to the next level with our sinks and ice chests. The Summerset Beverage Center is complete with an ice compartment, sink, towel holder, speed rail with condiment tray, LED lights, and a built-in bottle opener. When you’re grilling, we want to make sure you have everything you need conveniently on hand.

Summersetgrills.com
14520 Delta Lane Suite 105. Huntington Beach, CA. 92647 800.966.8126

Documents / Resources

| SUMMERSET TRL 32 Inch Built in Grill [pdf] User Manual
TRL 32 Inch Built in Grill, TRL, 32 Inch Built in Grill, Built in Grill, in Grill, Grill
---|---

References

• AMD Direct
• Register — AMD Direct
• Summerset Grills
• Register — AMD Direct

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>