Marshall Emberton II Bluetooth Portable Loudspeaker User Manual

Marshall WILLEN Portable Bluetooth Loudspeaker

DEVICE LAYOUT

GENERAL

1. USB-C POWER INPUT
   Charge the speaker by plugging it into a USB power source.

2. FASTENING STRAP
   Unhook the lower-right side of the strap by stretching it gently.

3. BLUETOOTH BUTTON
   Push and hold the Bluetooth® button until the LED turns to a slow red pulse to start pairing mode.

4. MICROPHONE
   The microphone lets you use Willen as a speakerphone. While in a call, push the Bluetooth button to toggle between using Willen for the call and your phone.

5. BATTERY INDICATOR
   The 5 segment Battery indicator shows the battery charge with a steady light and a rising animation indicates charging.

6. CONTROL KNOB

7. Push and hold for 2 seconds to turn on/off

8. Push once to play/pause

9. Push right/left to skip forward/back

10. Hold right/left to fast forward/rewind

11. Hold upwards/downwards to adjust the volume

12. Push once to answer or end a call

13. Push twice to reject a call

INSTRUCTIONS

BLUETOOTH PAIRING

1. Push and hold the control knob until the speaker turns on.
2. Push and hold the Bluetooth button until the LED turns to a slow red pulse.
3. Select WILLEN from your audio device’s Bluetooth list.

PERFORMING A FACTORY RESET
A factory reset will return the speaker to its original settings, excluding any firmware updates.

Note: This will delete all user settings and the speaker will need to be set up again.

1. Ensure that the speaker is on.
2. Push and hold the Bluetooth button for 7 seconds. All indicators turn off and the speaker restarts.
3. Remove WILLEN from your audio device’s Bluetooth list before pairing again.

MARSHALL BLUETOOTH APP
Download the Marshall Bluetooth app to get the most out of your speaker and keep it up to date with the latest software.

STACK MODE

Connect two or more Willen speakers in a Stack session for a bigger sound. Play anything on the main speaker and all speakers in the session will play in sync. You can adjust the volume on any individual speaker for the perfect balance.

1. MAIN SPEAKER
   Triple press the Bluetooth button to start or end a Stack session. The LED starts to blink until any other speaker joins the session.

2. ADDITIONAL SPEAKER
   Double press the Bluetooth button on any speaker you want to add to the session. The LED starts to blink until the speaker has joined a session. While in a session, the speaker will disconnect from any previously connected audio device and will try to reconnect after leaving the session. To remove a speaker from the session, double press the Bluetooth button on that speaker.

TROUBLESHOOTING

PROBLEM CAUSE                            ACTION

The speaker does not turn on| The battery has no charge| Plug the speaker into a USB power source to charge it
Cannot connect or pair with a

Bluetooth device

| Bluetooth is not enabled on your device (smartphone, tablet, computer)| Activate Bluetooth on your audio device
The speaker is not turned on| Push and hold the control knob for

2 seconds to turn on the speaker before setting it in pairing mode

Cannot play in Stack mode| The playback device is not connected to the main speaker| Make sure that your playback device (phone or computer) is paired with the main speaker
Bluetooth connection drops out| The Bluetooth devices are too far apart, or the connection is affected due

to obstacles

| Move the devices closer to each other so that they are unobstructed by obstacles such as walls or doors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>