Sailangde P07-MAX Selfie Stick Instructions

P07-MAX Selfie Stick
Instructions

SELFIESTICK INSTRUCTIONS

HOW TO USE

1. Startup: press and hold the camera button for 3 seconds to start the machine, and the indicator Bashes to enter the search state.
2. Bluetooth connection: open the mobile phone Bluetooth search “VIP” and dick the oonnection. After the connection is suasssftil the indicator light goes out
3. Photographing: when lhe remote oontrol is connected with the mobile phone, dick the photographing button, the indicator Bashes and tates pictures.
4. Shutdown without connection: when the remote control is in ihe state of no connection and no operation, it will automatically shut dcewn for about 5 minutes.
5. Connected shutdown: when the remcte control is connected with the mobile phone, it will enter the sleep state without operation for about 10 minutes, and then automatically shut down without operation for about 10 minutes.
6. Sleep: after entering the sleep state, press the photo tey to connect the mobile phone.
7. Shutdown: in the power on and sleep state, bng press the photo key for 3 seconds, the indicator Bashes off and shuts dcwn.
8. Back connection ftjnction: lhe remote control has memory connection function. When the mobile phone Bluetooth is turned on, the remote control will automatically connect the matched mobile phone.

Remove The Self Timer

Slide up and out of the remote control.

How To Replace The Battery

Push the battery back cover to open the remote control cover

Clip can rotation
Flip freely and shoot horizontally and vertically to take photos from multiple angles, which is more free to take photos. How do I open the tripod
Open outward at the handle position to change to tripod mode. Tripod mode
When the self timer lever changes to tripod mode, pay attention to pull out the last section of the lever and adjust it until the tripod is stable.

Product parameters

Width of holding mobile phone: 65-90mm Supported mobile phone size: 4.7-7 inches

Remote control parameters

Button battery:Battery model: cr1620 button battery (replaceable – as shown in Figure 2) Battery voltage: 3V Battery capacity: 70OmAh Bluetooth version: 5.2 Bluetooth Name: VIP
Solution to the case of failure of remote control to connect to mobile phone

1. Turn on the Bluetooth of the mobile phone and clear some paired Equipment
2. Turn off and restart the phone.
3. Him off and restart the Bluetooth remote control.
4. Him on the Bluetooth connection again.
5. Turn on ihe mobile phone Bluetooth, turn on the remcte control, and search the mobile phone interfaceWhen you get lhe VIp dick Connect and the interface displays “connecting’ When “connect / pair”, press the remote control button continuously and quickly that islt can be connected normally ( Excitation is only required for the first connectionLive, automatic connection in the future, normal use)

For Android phones, press the remote control to add soundSolution to the problem of quantity “ focus adjustment and / or no response.

1. Open the camera to enter the photographing interface.
2. Swipe left or find the camera settings.
3. Click the volume key function.
4. Set the volume key function to shutter (do not select zoom or zoom) Focus).
5. The setting path of individual mobile camera is different please find it yourself

This remote control only supports the video recording function of mobile camera, and does not support the video recording function of live app.

Operation methcxj:

1. Connect the Bluetooth remote control to the mobile phone
2. Enter the camera on the mobile phone or download other camera App software
3. Switch to video interface
4. Click the remote control button to record the video
5. Click the button again to end the video recording

Operating mode:

1. Remote control, effective distance 10m
2. Tripod mode
3. Handheld mode

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>