BYSTAMP KY2CB3 Electronic Stamp Test Report User Manual
- June 16, 2024
- BYSTAMP
Table of Contents
BYSTAMP KY2CB3 Electronic Stamp Test Report
Product Information
Specifications
- Manufacturer: BYSTAMP SAS
- Address : 3 RUE LOUIS DE BROGLIE 56000 VANNES FRANCE
- Regulatory Information: Available in the KEYMO(r) application
- Certification Number : FCC ID: 2A998-KY2CB3, IC: 30059-KY2CB3
- FCC Compliance : Part 15 of the FCC Rules
- ISED Compliance : ISED Canada licence-exempt RSS standard(s)
- IC: Class B digital apparatus complies with Canadian ICES-003
- VCCI Compliance : VCCI B
- Frequency / Maximum Power : 2.4 GHz (Bluetooth) / < 100 mW
Product Usage Instructions
Regulatory Information
To access regulatory and certification information:
- On PC/Mac, open the KEYMO(r) application and go to Help > Regulatory.
- On iOS/Android, open the KEYMO(r) application and go to Settings > Regulatory.
FCC Compliance
This device complies with part 15 of the FCC Rules. Please ensure the following:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
EMC Compliance
This product has demonstrated EMC compliance under the following conditions:
- Compliant peripheral devices were used.
- Shielded cables were used between system components.
ISED Compliance
This device complies with the ISED Canada licence-exempt RSS standard(s). Please note:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Compliance
This Class B digital apparatus complies with Canadian ICES-003.
VCCI Compliance
This product complies with VCCI B standards.
RF Exposure
This product is exempt from SAR evaluation under exemption limits for routine evaluation from ISDE and FCC RF exposure guidelines for portable devices.
FAQ
Q: Where can I find the regulatory information for the product?
A : The regulatory information can be found in the KEYMO(r) application. On PC/Mac, go to Help > Regulatory. On iOS/Android, go to Settings > Regulatory.
Q: What are the FCC compliance requirements for this device?
A : This device complies with part 15 of the FCC Rules. It should not cause harmful interference and must accept any interference received.
Q: What is the maximum power and frequency of the product?
A : The product operates at a frequency of 2.4 GHz (Bluetooth) and has a maximum power of less than 100 mW.
Q: Does this product comply with ISED Canada standards?
A : Yes, this device complies with ISED Canada licence-exempt RSS standard(s).
Regulatory and certification information is available in the KEYMO(r) application. On PC/Mac, Go to Help > Regulatory. On iOS/Android, Go to Settings > Regulatory.
Certification number
FCC ID : 2A998-KY2CB3
IC : 30059-KY2CB3
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components
Responsible party (contact for FCC matters only)
BYSTAMP SAS 3 RUE LOUIS DE BROGLIE 56000 VANNES FRANCE
ISED
This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)
Disposal and Recycling Information
The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities.
The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Frequency / Maximum Power
2.4 GHz (Bluetooth) / < 100 mW
RF Exposure
This product is exempt from SAR evaluation under exemption limits for routine evaluation from ISDE and FCC RF exposure guidelines for portable devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>