MMIZOO W1681 Wrist Blood Pressure Monitor User Guide
- June 16, 2024
- MMIZOO
Table of Contents
MMIZOO W1681 Wrist Blood Pressure Monitor User Guide
Install batteries
-
Open the battery cover.
-
Insert 2 “AAA” batteries.
-
Close the battery cover.
Set the date and time
- Press and hold SET for 6 seconds, continue to press SET to enter year setting.
- Press MEM to select the year.
- Press SET to cofirm.
- Repeat steps above to select and confirm the month, day, hour and minute.
For details, refer to the instruction manual.
Set the voice
-
Press and hold SET for 6 seconds, continue to press SET to until enter the SP setting.
-
Press MEM to switch the ON/OFF.
-
SP ON means voice on,
SP OFF means voice off. -
Press ON/OFF to cofirm.
For details, refer to the instruction manual.
Apply the wrist cuff
-
Put your wirst through the cuff loop.
Your palm and the display should face upward. -
Position the cuff leaving 0.5 inch between the cuff and the bottom of your palm.
-
Firmly wrap the cuff.
For details, refer to the instruction manual.
Sit correctly
For details, refer to the instruction manual.
Take a reading
-
Press the [ ON/OFF ] button.
-
Remain still until the wrist cuff deflates.
-
Your reading is displayed.
Press the [ON/OFF] button to turn the monitor off.
For details, refer to the instruction manual.
FAQ
Why are my blood pressure readings sometimes different?
Your blood pressure changes constantly based on your daily activities and time
of day.
Because of this, some fluctuations can be expected. That’s why it is important
to use averages over time to compare readings.
Because each person is different, it is important to consult with your
physician about what your numbers mean to you.
Why are readings different when measuring on the wrist and arm?
The principle of operation of a blood pressure monitor is to measure the
arterial pressure caused by the flow of blood.
Because the arteries on the wrist are relatively narrower compared to the arm
the readings may be slightly different from those of an arm blood pressure
monitor.
How come my doctor’s reading differs from my home readings?
Having your blood pressure measured by a healthcare professional in a
physician’s office can cause nervousness and may result in an elevated
reading.
However, when you measure your blood pressure at home, you are in a relaxed
state, that why the readings may vary differently.
TIPS 1
For accurate readings:
- Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for 30 minutes before taking a measurement.
- Rest for at least 5 minutes before taking a measurement.
- Sit quietly with your legs uncrossed and your feet flat on the floor.
TIPS 2
We recommend using “alkaline batteries”.
If the battery is depleted, it will not work correctly, Please check the battery before use and replace it if necessary.
Shenzhen Yuezhongxing Technology Co., Ltd
NO.2 Zhenye Road, Lilian Community, Pingshan District,
Shenzhen, Guangdong, 518118, China
Contact us 24/7 at www.mmizoous.com
Email us via: support@mmizoous.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>