Meixitoy ST120 Mini Photography Fill Light User Guide
- June 16, 2024
- Meixitoy
Table of Contents
Meixitoy ST120 Mini Photography Fill Light User Guide
Safety warning
- This product is not waterproof please do not let the product come into contact with liquid or damp, otherwise it may cause electric shock hazard;
- This product has a built-in battery. It is prohibited to put this product in fire or water, and it is forbidden to heat the product;
- Please do not disassemble the product by yourself. If the product fails please contact the dealer for repair. Disassembling the product by yourself may cause accidents and are not covered by the warranty;
- This use of the product may have a fever, do not place near flammable or explosive items.
Precautions
- When the fill light is on, do not look directly at the light source to avoid eye damage;
- When installing to the camera, please do not try to hold the product to pick up the camera. The interface design of the product cannot bear the weight of the camera may cause unexpected consequences;
- Please store the product out of the reach of children.
Part Name
Product features
120lamp beads design, built-in 5000mAh lithium battery each lamp bead represents 25% of the power, steeples adjustment of multiple lighting modes to switch at will, up to 20 creative lighting effects
Packing list
- Fill light*1
- Diffuser*1
- Type-C charging cable*1
- Cold shoe base*1
- Manual*1
- Color film*6
Specification
| Project | Specifications |
|---|---|
| Model | ST120 |
| Battery type | Built-in 5000mAh lithium battery |
| Charging interface | Type-C |
| Working voltage | 3.7V |
| Number of lamp beads | LED*120PCS |
| Power | 12W |
| CRI | >95 |
| Color temperature | 2500-9000K |
| Beam angle | 120° |
| Main material | ABS |
| Product Size | W106 x D16 x H66mm |
| Product weight | 117g |
Instructions for use
-
Installation Use 1/4″-20 screw holes to install this product on a camera or tripod
-
Switch machine, color temperature adjustment and brightness adjustment
Turn the knob to control the power switch and the brightness stepless adjustment
Product Charging
The charger will be powered on, and then use a USB to Type-C charging cable to connect the charging cable to the fill light, at this time the power indicator will stay water blinking, indicating that it is charging, when the indicator no longer blinks, indicating that charging is complete and all lights are on.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>