TOMZON D15 Mini Drone User Manual

D15 Mini Drone
User Manual

DANGER Only suitable for age 14+

Package List

| |
---|---|---
RC Drone| Remote Control| Battery
| |
Opener| Screwdriver| Blades Guard
| |
Extra Propellers| USB Charging Cable| User Manual

Safety Precaution

1. In order to ensure the requirements of electromagnetic environment of aviation radio station, it is forbidden to use all kinds of model remote controllers in the area with radius of 5000m and center point of airport runway. During the period when the relevant national departments issue radio control orders, the remote controller of the model shall be stopped according to the requirements.
2. Please fly in the warm,sunny and windless weather. Please do not fly in the severe weather conditions such as overheating, super cooling, strong wind and rainstorm.
3. In order to avoid accidents, please fly indoors or outdoors in an open space, and keep a safe distance from people, pets, empty wires and other obstacles, Most importantly, please do not let the drone out of your sight.
4. After the aircraft started, please do not touch the high-speed rotating gear, rotor and other parts of the aircraft, so as to avoid the risk of strangulation.

Drone LED Indicator Status

The indicators flashes slowly| The remote control is not connected to the drone
---|---
The indicators stay on| Normal status
The indicators flashes twice quickly| Headless mode
The indicators light flashes quickly| Calibrating

Trouble Shooting

The indicator of the drone flashes slowly
and does not respond to the remote control.| 1. The remote control is not connected to the drone
2. Low battery| 1. Perform frequency matching operations.
2. Recharge the battery.
The propellers could spin, but cannot take-off.| 1. Low battery
2. The propellers are installed in wrong orientation.
3. The propellers are distorted.| 1. Recharge the battery
2. Install the propellers in right orientation.
3. Replace the propellers.
The drone sways sharply.| The propellers are distorted.| Replace the propellers.
Drone cannot stay balanced in flight.| 1. Gyro sensor is not calibrated
2. The propellers were distorted.| 1. Recalibration
2. Replace the propellers.
The drone indicators flashes and the
remote control emits a “beep~beep” sound| Low battery| Recharge the battery

APP

Download the App
Scan the QR code below or search “Tomzon-V” in App Store or Google Play to download the App.

http://www.vison- st.com/app/download/Tomzon-V

For the smartphone with Android 5.0+:
Search and download ” Tomzon-V ” from Google Play. Or scan the QR code below to download. For the smartphone with iOS 9.0+:
Search and download ” Tomzon-V ” from App Store. Or scan the QR code below to download.

Connect to the APP:

1. Long press the power switch of the drone for 1S to start the drone, and confirm that the camera’s Wi-Fi signal light (red light) enters the slow flashing state, indicating that the Wi-Fi module is ready.

2. 2.1 Wi-Fi Connection (IOS)
   1 Go to the setting, swipe down to find the Tomzon-V APP. Turn on the local network, Wi-Fi and cellular network authorization.2 Enter the wireless settings of the mobile phone, click the Wi-Fi name:
   Tomzon_D15_xxxxxx. 2.2 Wi-Fi connection (Android)
   Enter the mobile phone WLAN settings, click to connect to the aircraft  Wi-Fi: Tomzon_D15_xxxxxx, select in the mobile hotspot Internetnetwork data detection prompt: Keep WLAN Connection.

3. After successful connection, click connect and enter the APP flight interface to start the flight experience.

Note:
If the drone’s Wi-Fi is not occurring on your phone, please open your phone’s airplane mode and restart the drone to try again. Or please just contact the official email for technology support.

Aircraft Profile

1. Camera
2. Motor
3. Indicator light
4. Propeller
5. The aircraft has two types of blades (“A” and “B”). The logo “A” or “B” is printed on the arm and propeller respectively. When replacing propeller, please match according to the corresponding “A” or “B” logo.
6. Propeller guard
7. Power button (Long press the power button to turn on / off the aircraft.)

Install the propeller

Install the battery Install the protective guard

Charge
Charge the battery as shown in the figure. When charging, the red light of USB charger will be on. After charging, the red light of USB charger will be off.

Remote Control Profile

1 Slow / Normal / Fast
(Short press to switch the flying speed)
2 Left control stick
3 Trimming
4 Power button
5 Right control stick
6 Intelligent Flight Mode (Short press to start / Pause rotation mode, long press for 1 second to start / Pause surround mode)| 7 Photo / Video
(Short press to take a photo. Long press for 1 second to start/stop recording)
8 Take off / Land
(Short press to take off / Land, Long press for 3 seconds to trigger emergency stop)
9 Headless mode
10 3D Roll
11 Phone clip
---|---

Prompt:

1. The drone supports two control modes, mode 1 and mode 2.
   Mode1: The Left joystick controls the drone’s ascending / descending, turn left / right; The Right joystick controls forward / backward, left / right side flight.
   Mode2: The left joystick controls forward / backward, turn left / right; The Right joystick controls drone’s ascending / descending, left / right side flight.
   Mode 1 is the default setting when the remote control was turned on.
   To switch the mode 2: Press and hold the key 1, and then turn on the remote control.

2. The following describes the control methods, taking mode 1 as an example.

Install the remote control battery

Use the screwdriver to press down to the position shown in the figure, and open the battery cover to install the battery (not included).

Quick Start

Frequency matching

1. Turn on the drone and place it on a horizontal surface.
2. Turn on the power of the remote control, and it will make a beep.
   Afterwards, the remote control emits two beeps, indicating that the linking is successful.

Calibration

Push the two control sticks downwards outward 45° together.
Tips:

1. During calibration, the remote control beeps, the drone indicators flashes quickly, and the calibration complete indicator light is always on.
2. When the drone crashes, please recalibrate it.

Take off
Method 1: Short press to take off.
Method 2:

1. Push the two control sticks at at the same time time as shown in the figure.
2. Push the left stick up slowly and the drone will take off.

Landing
Method 1:

Short press to land, and the drone will land slowly.
Method 2: Pull the left stick down slowly until the drone lands, keep the left stick at the lowest position until the motor stops rotating, and the drone lands successfully.

Emergency Stop

In case of emergency, long press the button for 3 seconds, the motor of the drone will stop and fall.
**** Only stop motors during the flight when emergent situation happens, or the risk of drone damage will increase.

Basic Flight

Altitude & Rotate
The following example use the Mode 1.
Note:

Use “left control stick” to control the altitude & rotation during flight. Forward / Backward / Left / Right
Use “right control stick” to control forward/backward/left/right during flight.

Headless mode

Headless mode means that when the aircraft is flying, the movement direction of the aircraft is fixed, which does not change with the orientation of the aircraft, as shown in the figure.

Direction setting:
Under the headless mode, the drone’s front direction is where the drone’s head face at that moment, so please make sure you have placed the drone in the right direction. If you need to change the drone’s front direction, you should restart the drone and re-pairing it again.

3D Flip mode

Step 1: Press the “3D Roll” button to start the roll mode, at this time the remote control keeps beeping.
Step 2 : Push the right stick forward, and the drone will roll forward 360° immediately.
Tip: If you want to roll in other directions, please push the right stick to other directions.

Fine tuning

If the drone keeps tilting in a certain direction after take-off, rather than hovering smoothly in a specific position, it may be affected by the air currents in the environment the drone is in.
Please operate the position shown in the icon to make fine adjustments.
For example, if the drone keeps flying to the left, you need to fine-tune the operation of the drone to the right.

Intelligent Flight Mode

Rotation mode
Short press to start / Pause rotation mode.
Surround mode
Long press for 1 second to start / Pause surround mode. Tip:

1. To ensure safety, please install the protective cover first and use this function in an open environment.
2. In this mode, you can only control the rising and down of the drone.
3.  When pushing the direction joystick, the drone will exit this mode immediately.

Specification

Drone

Take-off weight| 53g
Drone size| Fold：11.24.84.5cm
Unfold：17.114.24.5cm
Working frequency| 2.4GHz
Maximum remote control distance| 50~60m (No interference，no shelter)
Image transmission range| 20~30m (No interference，no shelter)
Battery| 3.7V 580mAh 2.146Wh
Working temperature| 0-40℃
Remote control
Working frequency| 2.4GHz
Remote control battery| 3 × AAA battery (not included)

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Street, Baoan District, Shenzhen
Battery information| 5V **** 1A
Charging voltage / current| Lipo 580mAh 3.7V 2.146Wh
FCC ID| 2ALOXD10
EC REP 1:
Like Sun GmbH.
Planckstr.59, 45147 Essen, Germany| EC REP 2:
DST Co., Ltd.
Fifth Floor 3 Gower Street, London, WC1E 6HA, UK

CAUTION

This toy is recommended for children 14 years of age and older. To ensure that the child’s play is both safe and fun, please read the operating instruction and the general safety rules with your child.

• Keep eyes, face, fingers and hair away from the rotor blade, tail blade and gear, as they will rotate at very high speed while the aircraft is flying.
• Adult supervision is recommended when the aircraft is being operated.

WARNING

Warning: The product should only be used by adults and children over 14 years. Adult supervision is required for children under 14 years.

Email: support@tomzontoys.com
Web: www.tomzontoys.com
FB: www.facebook.com/tomzonofficial
support.de@tomzontoys.com
support.fr@tomzontoys.com
support.uk@tomzontoys.com
support.it@tomzontoys.com
support.es@tomzontoys.com
support.jp@tomzontoys.com

References

• 没有找到站点

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>