Hishell J10 Wireless Bluetooth Earbuds User Manual

Hishell J10 Wireless Bluetooth Earbuds

Product Information

Specifications

• Product name : J10
• Bluetooth version : 5.3+EDR
• Connection distance : 15m
• Charging time : about 1 hour
• Input : 5V-1A

Product Usage Instructions

Product Function Introduction

The J10 Ear Phones have the following functions and features:

• Multi-touch point
• Volume adjustment keys
• Display light
• Headset charging contacts
• Left ear logo
• Right ear logo
• Type-C charging interface
• Power indicator light

Packaging Accessories

The J10 Ear Phones come with the following accessories:

• Charging case
• Earphones
• Charging cable
• 3 pairs of ear-tips
• Certificate
• Ear cap cue cards
• User manual

Instructions for Headset Touch Operation

The J10 Ear Phones can be operated using touch gestures. Here are the touch operations:

• Left ear touch:
  • Long press for about 3 seconds to turn on/off
  • Single tap to play/pause
• Right ear touch:
  • Long press for about 2 seconds to turn on/off
  • Single tap to answer/hang up calls

Connection

To connect the J10 Ear Phones to your device, follow these steps:

1. Open your phone or other device and enable Bluetooth.
2. Search for “J10” and click Connect.
3. Open the cover of the charging case to connect the earphones. The left and right ears can be connected separately.

Turn it off

To turn off the J10 Ear Phones, you can do the following:

• Put the earphones into the charging compartment and close the lid to shut down.
• If there is no activity for 5 minutes, the earphones will enter sleep shutdown mode.
• Long press the touch area of either earphone for about 5 seconds to turn on/off.

Charging Instructions

The J10 Ear Phones can be charged using the charging case. Here are the charging instructions:

1. Unilateral headset charging:

   • Place the left earphone in the charging compartment and close the lid. The left earphone display light will run from low to high (L1 to L4) and turn off when fully charged.
   • Place the right earphone in the charging compartment and close
     the lid. The display light of the right earphone will run from low to high (L1 to L4) and turn off when fully charged.

2. Charge both left and right ears simultaneously:

   • Put both earphones into the charging compartment at the same
     time and close the lid. The indicator lights on both sides of the earphones will run from low to high (L1 to L4) and turn off when fully charged.

3. Charging in the charging compartment:

   • After opening the lid, the four lights will gradually light up at the same time, indicating the charge compartment battery level. After 10 seconds, the lights will go out.
   • When using the data cable to charge the charging compartment, the lights will turn on from left to right (LED1 to LED4), with each light representing 25% of the power. When the charging cable is unplugged, the lights will be on for 10 seconds and then turn off.

Matching and Resetting Method

If you need to match or reset the J10 Ear Phones, follow these steps:

1. Remove the earphones from the charging case.
2. Touch (L) the left earphone 7 times and wait for 3-5 seconds. The left and right earphones will slowly flash blue lights to indicate successful pairing.
3. To reset, touch both the left and right earphones 8 times and put them back into the charging case.

FAQ

Q: How do I connect the J10 Ear Phones to my device?

A: To con ect the J10 Ear Phones to your device, follow these steps:

1. Open your phone or other device and enable Bluetooth.
2. Search for “J10” and click Connect.
3. Open the cover of the charging case to connect the earphones. The left and right ears can be connected separately.

Q: How do I turn off the J10 Ear Phones?

A : To turn off the J10 Ear Phones, you can do the following:

• Put the earphones into the charging compartment and close the lid to shut down.
• If there is no activity for 5 minutes, the earphones will enter sleep shutdown mode.
• Long press the touch area of either earphone for about 5 seconds to turn on/off.

Q: How do I charge the J10 Ear Phones?

A: The J10 Ear Phones can be charged using the charging case. Here are the charging instructions:

1. Unilateral headset charging:
   • Place the left earphone in the charging compartment and close the lid. The left earphone display light will run from low to high (L1 to L4) and turn off when fully charged.
   • Place the right earphone in the charging compartment and close the lid. The display light of the right earphone will run from low to high (L1 to L4) and turn off when fully charged.
2. Charge both left and right ears simultaneously:
   • Put both earphones into the charging compartment at the same time and close the lid. The indicator lights on both sides of the earphones will run from low to high (L1 to L4) and turn off when fully charged.
3. Charging in the charging compartment:
   • After opening the lid, the four lights will gradually light up at the same time, indicating the charge compartment battery level. After 10 seconds, the lights will go out.
   • When using the data cable to charge the charging compartment, the lights will turn on from left to right (LED1 to LED4), with each light representing 25% of the power. When the charging cable is unplugged, the lights will be on for 10 seconds and then turn off.

Product Function introduction

1. Multi-touch point 8
2. Volume adjustment keys
3. Display light
4. Left ear logo
5. Headset charging contacts
6. Right ear logo
7. Power indicator light
8. Type-C charging interface

Packaging accessories

1. Charging case,earphones
2.  Charging cable
3. pairs of ear-tips
4. Ear cap cue cards
5.  Certificate
6. User manual

Instructions for headset touch operation

Long press

Long press for 2 seconds

Long press for 5 seconds

Long press for 2 seconds

Right ear touch

Earphone connection instructions

Connection

• Device connection: Open your phone or other device, search for “J10”, and click Connect.
• Open the cover to connect the charging compartment. The left and right ears can be connected separately.

Turn it off

• Put the earphones into the charging compartment and close the lid to shut down
•  No work for 5 minutes, sleep shutdown
• Long press for about 5 seconds to turn on/ off the ear

Charging instructions

Unilateral headset charging

• After the left earphone is placed in the charging compartment and the cover is closed, the left earphone display light will run from low to high (L1 to L4), and it will turn off when fully charged.

• After the right earphone is placed in the charging compartment and the cover is closed, the display light of the right earphone runs from low to high (L1 to L4), and goes out when fully charged.

Charge both left and right ears simultaneously

• Put the earphones into the charging compartment at the same time and close the lid, the indicator lights on both sides of the earphones will run from low to high (L1 to L4), and they will turn off when fully charged.

Charging in the charging compartment

• After opening the lid, the four lights will gradually light up at the same time, and then display the charge compartment battery level. After 10 seconds, the lights will go out.
• When the charging compartment uses the data cable to charge, from the left to the right (LED1 to LED4), each light is 25% of the power, and it is fully on. When the charging cable is unplugged, it turns on for 10 seconds and then turns off.

Matching and resetting method

Remove the headset, touch (L) the left ear 7 times and wait 3-5 seconds, binaural slow flashing blue light pairing success (please refer to the index below ) touch the left and right ear eight times reset, put into the filling bin.

• The the display are tutorially to sec ods of displaying the curene opened,
• Touch 7 times and wait for 3-5 seconds to pair successfully, Touch & to reset.
• For the second use, open the charging cover and automatically reconnect to the huetooth

The basic parameters

Matters needing attention

• Please make sure the product is fully charged before the first use;Or charge it first.
• Please use a brand charger or computer USB to charge the headset (note: 5V-1A charger).
• Stay away from WIFI and routers and other high frequency transmitting devices, which may affect the signal reception of the unit and cause the phenomenon of sound blocking and disconnection.
• Please use the product in an effective environment (15m) and there should be no physical barriers (such as walls, etc.) between the BT device and the headset.When the headset appears unilateral no sound, binaural pairing unsuccessful and other phenomena, please refer to item 6 (pairing and reset method) to re-pair the headset connection, reconnect the product normal use!

Safety warning

• Please ensure that the product is not used or stored in high tem perature or humid environment to avoid affecting the product performance.
• Do not drop or drop the product from high altitude to avoid dam age.
• Please contact manufacturer if there is any product problem, an d don’t disassemble the product for repair.

Thanks for buying our J10 TWS earphone which comes with wireless stereo, left and right channel separation and HIFI sound functions. And It can be used alone or in pairs. We welcome your suggestions and comments on our products and services!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>