ELCO Lighting EL918ICA 6 Inch Sloped Ceiling Medium Base IC Airtight Single Wall New Construction Housing User Manual
- June 4, 2024
- ELCO Lighting
Table of Contents
EL918ICA 6 Inch Sloped Ceiling Medium Base IC Airtight Single Wall New
Construction Housing
User Manual
ELCO Slant allows for installation in sloped ceilings ranging from 2/12 (10°) to 6/12 (26.5°). Can be used in insulated ceilings. Fits in 2″ x 8″ joist construction.
Features
- Airtight aluminum Single Wall Construction.
- Integral thermal protector guards against improper lamping.
- Designed for use in 2/12 to 6/12 sloped ceiling.
- Socket: Medium base E26.
- Compatible with Medium Base Incandescent, CFL or LED
- Lamp MAX. 75W. Works with LED Quick-Connect Inserts with PSA30 Socket Adapter.
Specifications
Wattage | 75W |
---|---|
Voltage | 120V |
Lamp Type | Medium Base (E26) |
Damp Location | Listed |
Technical Details
Construction:
IC Rated for Direct Contact with Insulation.
Designed for use in 2/12 to 6/12 sloped ceilings.
Housing adjusts in the frame to accommodate up to 1 1/4” ceiling thickness.
Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2×8 joists or taller are
used. High-strength hanger bars can
easily be nailed to joists. A template for hole cutout is provided with each
housing. Suitable for T-grid and drop
ceiling applications. See the installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2”
trade-size conduit knockouts and four pry-out knockout slots for easy romex
installation.
Hanger Bars: Pre-installed hanger bars with True Nail easy installation in
regular lumber, engineered lumber, and Laminated Beams. Integral T-bar slots
for easy installation in T- Bars. Spans up to 24″ and can be repositioned 90°.
Score lines allow for tool-free hanger bar size reduction. Integral leveling
flange allows for single-person installation while aligning the housings with
the joists.
Electrical:
- Rated for 120V or 277V input.
- For 277V step down to 120V housing consult factory.
Trims: Compatible with ELCO Line Voltage Slope Trims.
Listings: UL Listed for Damp Location.
UL is Listed for Direct Contact with Insulation and Combustible Material.
UL is Listed for Feed Through.
Meets restricted air flow requirements (Per ASTM E-283 Standard).
Dimensions
Product Number
Item | Lamp type | Watts | Voltage |
---|---|---|---|
EL918ICA | Medium Base (E26) | 75W | 120V |
2042 E. Vernon Ave., Vernon, CA 90058
Tel 323-231-2600 Fax
323-231-3200
elcolighting.com
© ELCO Lighting 2022. All rights reserved
Rev. 25 Aug 2021
ELCO Lighting reserves the right to make specification and design changes
without notice.
2042 E. Vernon Ave., Vernon, CA 90058