rizoma BS209 4D Right Rearview Mirror User Manual
- June 4, 2024
- rizoma
Table of Contents
BS209 4D Right Rearview Mirror
User Manual
BS209 4D Right Rearview Mirror
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to
mount and use the product correctly and enjoy all the features it has. For
your protection and safety, RIZOMA expressly recommends that you have the
installation of the product performed by skilled personnel. Improper
installation, repair, or maintenance, can cause accidents. Keep this user
guide as a reference for the future. RIZOMA accepts no liability for any
damage, of a kind, which may be caused, directly or indirectly, to persons or
things as a result of incorrect assembly or failure to observe all the
assembly instructions. We also invite you to comply with provisions of the
Highway Code and Traffic rules and/or to additional regulations in force in
your Country.
– Attention: This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.
- Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
- For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
- After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights, and steering. We strongly suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products.
If your products are leaking, bent, deformed, cracked, chipped, or worn, no
matter how slight, immediately have a RIZOMA dealer inspect the products
before you ride again. In any case, never try to repair or modify the Rizoma
products or their components, always replace them with Rizoma original
components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before.
For your, safety Rizoma suggests always contacting your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
The 4D mirror is CE-homologated and features special convex, anti-dazzle,
aspherical glass. This last aspect provides more comfortable peripheral
Vision.
Made entirely from billet aluminum, the special 3D machining process gives it
an aerodynamic lift to maximize stability. The result of innovative technical
choices, this new mirror combines a mixture of soft and bold lines with
refined, multi-faceted machining. Consult the website
www.rizoma.com, and click on the BS209 page in the
section “MEDIA”, to download the homologation document in PDF format.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine is similar to the ambient temperature. WARNING: TO CLEAN YOUR DETAILS OF THE KIT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR DETAILS BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
INSTALL MIRROR
ADJUSTMENT MIRROR
RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based on contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full-face helmet), that has been approved by ANSI, SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
styles, such as full-finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries
where homologation is required.
Thus RIZOMA® Srl declines any responsibility for different use of its
products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>