HANUU B0B97BP6DN Powered Air Purifying Respirator User Manual
- June 16, 2024
- HANUU
Table of Contents
POWERED AIR PURIFYING RESPIRATOR
Precautions
- Before using the blower, the power should be sufficient / normal operation, and the connection must be checked before use. There must be no looseness. in order to avoid air leakage and endanger the health of users.
- lease insert the appropriate length of hose inserted into the end of the mask into the buckleon the safety belt, tighten the belt to fix the long tube on the belt. To prevent the mask from being worn when dragged.
- Check the airtight ness of the whole machine and seal the joint inserted into the end of the blower by hand to inhale. Feeling holding your breath means that the airtight ness of the mask is good. Then insert the blower hose socket and turn on the blower at the same time to input fresh air into the mask for the user to breathe.
- After each use, wipe off the mask, snorkel and accessories, and put the long tube into the storage box. The environment of the storage place should be kept dry, ventilated and avoid heat. The mask lens must not come into contact with organic solvents to avoid damage. In addition collision and friction should be avoided as much as possible to avoid scratching the lens surface. Men should shave their beards before wearing the mask, so as not to affect the tightness of the mask.
- Long tube masks should be kept by a special person and checked regularly. If problems are foundthey should be repaired in time, and if necessary, replace damaged parts.
- In normal use, if you smell an odor or the air supply is weak, please check or replace the filteiconsumables in time.
Caveat
When the following conditions occur, you should immediately stop working and
evacuate fromthe scene
- When breathing is difficult
- Harmful gas from the hand
- When smelling harmful gas
- When the eyes, nose, mouth, etc. are irritated due to harmful gases
- When the abnormality of the air flow is managed or when the air supply is stopped
- Due to power outages, failures, etc, when the operation is stopped
- Suitable for a variety of dusty workplaces, suitable for preventing all kinds of particles (dust, mist, smoke, etc) and not exceeding the standard odor.
- Not suitable for an oxygen-deficient working environment (the air environment with an oxygen content of less than 18% is an oxygen-deficient environment), not suitable for DLH concentration (an concentration that immediately threatens life and health), and not suitable for working places that may cause an explosion.
Assembly Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>