cpac System SID2M HMI Controller Instructions
- June 16, 2024
- cpac System
Table of Contents
**cpac System SID2M HMI Controller Instructions
**
Additional Type Approval information and Safety Precautions/Warnings!
Legal Statements for SID 2.0, SID 2.0M and SID 2.0MLTE.
This document contains
- Additional Type Approval information such as type approval symbols, numbers and texts for the SID 2.0 unit required by national authorities and where this information is not found on the device itself due to limited space.
- Legal Statements and Safety Precautions/Warnings for the SID 2.0 unit required by national authorities.
Country/ Region| Additional Type Approval Information –
Statements/Precautions/Warning
---|---
Canada| Contains IC: 10224A-201903EG25G
| This device complies with Part 15 of the FCC Rules and with RSS-210 and
RSS-247 of Industry Canada. Operation is subject to the following two
conditions.
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation. t. NOTE: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
USA| Contains FCC ID: XMR201903EG25G
This device complies with Part 15 of the FCC Rules and with RSS-210 and RSS-247 of Industry Canada. Operation is subject to the following two conditions. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTICE: Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment.
Radio frequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter should not be co-located or operating in conjunction with any other antenna or transmitter.
Japan| Device approval numbers R: 202-JKM116 T: D23-0028 202
LTE module: Quested EG25-G Approval number JATE: AD 19 0040 201 / 00 Approval
number TELEC: 201-190133 / 00
Europe| WLAN: This device may be operated at 2412-2472 MHz, 5150-5350
MHz and 5470-5725 MHz.