WAHFAY WN7015 Acrylic End Table Instruction Manual
- June 16, 2024
- WAHFAY
Table of Contents
WAHFAY WN7015 Acrylic End Table
ACCESSORIES DISPLAY
The accessories display includes a diagram showing various components laid out for identification. There are panels of different sizes, with the largest being a tabletop. Additionally, a set of smaller items, possibly screws or fasteners, are aligned in two rows, indicating their quantity and uniformity.
INSTALLATION STEPS
-
STEP 1
Invert the tabletop and install the side panel. The illustration shows a tabletop being flipped upside down with a side panel standing vertically, ready to be attached at its edge. -
STEP 2
How to use the installation tool: Fix the nut, turn the screw. The image depicts a close-up view of a hand using a tool to tighten a nut onto a bolt. Red arrows indicate the direction to turn the tool for tightening. -
STEP 3
Install another side panel. This diagram illustrates the addition of the second side panel, making the structure start to resemble the outline of a box or a piece of furniture. -
STEP 4
Install the shelf. A shelf is placed horizontally, connecting the two side panels at their midpoints, as shown in the illustration. -
STEP 5
Complete. The final image shows the fully assembled piece, which appears to be a small table or nightstand with a shelf.
Specifications
| Step | Instruction | Illustration Description |
|---|---|---|
| 1 | Invert the tabletop and install the side panel. | The Tabletop is inverted |
with a side panel positioned at the edge.
2| Fix the nut, turn the screw using the installation tool.| Hand tightening a
nut with a tool, indicated by red arrows.
3| Install another side panel.| The second side panel is being added to the
structure.
4| Install the shelf.| Shelf connecting the two side panels at the midpoint.
5| Complete the assembly.| Fully assembled table or nightstand with shelf.
FAQ
-
What tools are required for the assembly?
Based on the image, an installation tool is required to fix the nuts and turn the screws. -
Can the shelf be adjusted to different heights?
The image only showcases the shelf being installed at the midpoint of the side panels; however, adjustability might depend on the design not depicted here. -
How many fasteners are needed for assembly?
The accessories display shows two rows of fasteners, indicating a specific quantity required for the complete assembly. -
Is it necessary to invert the tabletop during assembly?
Yes, step 1 specifically instructs to invert the tabletop before installing the side panels.