OMANIFER Mini Bluetooth Thermal Printer Instruction Manual

OMANIFER Mini Bluetooth Thermal Printer

Please read the instructions carefully before using this product The specification is for reference only., the specific operation shall be in kind

Brief Introduction

Welcome and thank you for choosing our products, in order to understand and use our products more quickly, it is recommended that you read this manual carefully before use, and keep it properly for future reference. Warnings and precautions in the instruction manual should be complied with. If there is any reference error, we hope that users will understand that the design content will be changed without notice.
This product is a unique shape, exquisite design, easy to operate children’s digital printer, designed for children’s digital products, so that children in use to learn more imagination play, experience the fun of nature.

Key/Interface Specification

Please charge for the first time and unplug the charger before us

Use the wizard

1. First use please charge first, long press the power key 3 seconds to boot.

2. Apple store or Google search :
   Fun print I installed APP to use.
   
   Fun print

3. After bluetooth is enabled, use the app downloaded from the mobile phone to connect to the Bluetooth printer in the TAB bar of “My Device”. After successful connection, the note can be printed.

Paper replacement course

1. Take out the old paper roll and put the new paper roll in the direction shown. The paper should be put straight and not crooked. (Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shaped)

2. Cover the paper bin, the machine can automatically absorb paper after normal use.

3. After the above steps are correct, the machine can print normally.

Battery Warning Note

1. Please use SV charger to charge according to the specification to avoid damage to the machine.
2. Disassembly, impact, extrusion or fire are prohibited;
3. If severe bulging occurs, do not continue to use;
4. Do not put in high temperature environment, battery after immersion is prohibited to use;
5. Replacement with the wrong type of battery can be explosive, be sure to follow the instructions to dispose of used batteries.

Matters needing attention

1. When charging, please gently Insert or pull out the charging line to prevent excessive force damage to the port;

2. After charging, please unplug the charging line In time;

3. ln order to avoid danger, do not use or charge In high temperature, high humidity, excessive smoke and dust environment, such as:
   bathroom, steam room, open fire, etc;

4. Improper charging may lead to print head damage;

5. Do not touch the print head to prevent overheating and scalding;

6. Tear paper blade sharp, be careful not to touch.

The depth of the print can be controlled th rough the APP in the »Concentration« section as shown in the picture below. The concentration setting can be set to Shallow, Moderate or Deepen.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>