Siweier DG09 Open Ear ENC Bluetooth Headphone User Manual
- June 16, 2024
- Siweier
Table of Contents
Siweier DG09 Open Ear ENC Bluetooth Headphone
Summary Of Button Function
- Power On/Off/Volume up
- Volume down
- LED indicator
- charging port
- Multifunction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
- Noise reduction microphone
On : When the headphone is in power-off state, press and hold power
button for 3 seconds with blue LED flickering , reminding tone: power on .
Off : When the headphone is in power-on state, press and hold power
button for 5 seconds with red LED flickering once, reminding tone: power off.
Connect BT : When the headphone is in power-off state, press and hold it
for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone: pairing. After the device (smart phone, tablet computer, etc.)
discovers DG09, press it to connect.
Connected successfully: When the headphone is successfully linked to the
device, blue LED will flicker every 3 seconds with reminding tone: Connected
Pause/Play : When the music is on , single click the multi-function
button to pause or play.
Answer/Hang-up: click multi-function button to answer when there is an
incoming call. Click the multi-function button to end the ongoing call.
Vol+: Press the Vol+ once to turn up the volume.
Vol-: Press the Vol- once to turn down the volume.
Next Track: Double-click the multi-function button skip to next track.
Last Track: Triple-click the multi-function button skip to last track.
Assistant : Long press the multi-function button for 3 seconds to enter
Voice Assistant model. Long press 3 seconds again to exit the Voice Assistant
model
Reset : After plugging the USB charging line, the headphone will be reset
and powered off for charging.
Clear all paring info : Long press the Power On/Off button and Volume
down button for 5 seconds simultaneously
Charging : In case of using USB charging line for charging, connect the
headphone with the USB power. During the charging, LED turns red. After
charging, the LED turns blue.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
Music play time ——————-Standard: 10 hours
Stand by time ———————-200 hours
Charging time ———————2 hours
BT version————————–5. 3
Speaker impedance ————–32Ω±3
Microphone sensitivity ———–40±2db
Product weight ———————29 .5g
Connection distance ————–15 meters
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessive long time maitake you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(!) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.