Electrolux EW7W3865LO Washer Dryer User Manual

Electrolux EW7W3865LO Washer Dryer

Product Information

The Electrolux EW7W3865LO Washer Dryer is a versatile appliance that combines the functions of a washing machine and a dryer. With decades of professional experience and innovation, this product is designed to provide great results every time. It features a worktop, detergent dispenser, control panel, door handle, rating plate, drain pump filter, feet for leveling, drain hose, inlet hose connection, mains cable, transit bolts, and hose support. The rating plate displays the model name, product number, electrical ratings, and serial number.

Product Usage Instructions

1. Safety Information: Before installing and using the appliance, carefully read the supplied instructions. Keep the instructions in a safe and accessible location for future reference.
2. Children and Vulnerable People Safety: Take caution to ensure the safety of children and vulnerable individuals.
3. Installation: Follow relevant national regulations for proper installation.
4. Electrical Connection: To avoid the risk of fire and electric shock, follow the provided instructions for electrical connection.
5. Water Connection: Connect the water inlet hose to a water tap with a 3/4” thread. Ensure that the water supply pressure is between 0.5 bar (0.05 MPa) and 10 bar (1.0 MPa).
6. Use: Take precautions to avoid injury, electric shock, fire, burns, or damage to the appliance during use.
7. Service: Contact the Authorised Service Centre for any service or repairs. Provide the model, PNC, and serial number of the appliance.
8. Disposal: Follow the relevant regulations for the disposal of Waste Electrical and Electronic Equipment (WEEE).
9. Technical Data: The appliance has dimensions of 59.7 cm (width), 84.7 cm (height), and 57.3 cm (total depth). The electrical connection requires a voltage of 230 V, overall power of 2000 W, a fuse of 10 A, and a frequency of 50 Hz. The appliance has a level of protection against solid particles and moisture, indicated by the IPX4 rating. The water supply should be cold with a minimum pressure of 0.5 bar (0.05 MPa) and a maximum pressure of 10 bar (1.0 MPa). The maximum wash load is 8.0 kg for cotton, and the maximum dry load is 5.0 kg for cotton and 3.0 kg for synthetics. The maximum spin speed is 1600 rpm.
10. Installation: Follow the safety chapters for proper installation. Start by unpacking the appliance and removing all items from the drum.

EW7W3865LO
EN Washer Dryer

User Manual

2 www.electrolux.com

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux. Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support
Register your product for better service: www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information

ENGLISH 3
Subject to change without notice.

SAFETY INFORMATION
Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability. · This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. · Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. · Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. · Children should be supervised to ensure that they do not play with the appliance. · Keep all packaging away from children and dispose of it appropriately. · Keep detergents away from children. · Keep children and pets away from the appliance when the door is open. · If the appliance has a child safety device, it should be activated.

4 www.electrolux.com
· Children shall not carry out cleaning and user maintenance of the appliance without supervision.
1.2 General Safety · This appliance is for washing and drying domestic-
type machine-washable and dryable laundry only. · Do not use the dryer function if laundry has been
soiled with industrial chemicals. · This appliance is designed for single household
domestic use in an indoor environment. · This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels. · Do not change the specification of this appliance. · The appliance shall be installed as a freestanding product or below the kitchen worktop if space margins permit. · Do not install the appliance behind a lockable door, a sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open. · Connect the mains plug to the mains socket only at the end of the installation process. Make sure that the mains plug is accessible after installation. · The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. · WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility. · Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of unwanted gases into the room from appliances burning gas or other fuels, including open fires. · Exhaust air must not be discharged into a flue which is used for exhausting fumes from any appliances burning gas or other fuels.

ENGLISH 5
· The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 10 bar (1.0 MPa).
· The appliance maximum load is 8.0 kg. Do not exceed the maximum load of each programme (refer to the “Programmes” chapter).
· The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
· Old hose sets must not be reused. · If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. · Wipe away lint or packaging debris that has accumulated around the appliance. · Items that have been soiled with substances such as vegetable or mineral oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed separately with an extra amount of detergent before being dried in the washer dryer. · Do not use the appliance if items have been soiled with industrial chemicals. · Do not dry unwashed items in the wash dryer. · Items such as foam rubber (latex foam), shower caps, waterproof textiles, and rubber backed articles and clothes, or pillows fitted with foam rubber pads should not be dried in the washer dryer. · Fabric softeners, or similar products, should only be used as specified by the product manufacturer’s instructions. · Remove all objects from items that could be a source of fire ignition such as lighters or matches. · WARNING: Never stop the washer dryer before the end of the drying cycle unless all items are quickly removed and separated so that residual heat can dissipate.

6 www.electrolux.com

· The final part of the washer dryer cycle takes place without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them.
· Do not use high pressure water sprays and/or steam to clean the appliance.
· Clean the appliance with a moist cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
· Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

SAFETY INSTRUCTIONS

Installation
The installation must comply with relevant national regulations.
· Follow the installation instructions supplied with the appliance.
· Do not install or use the appliance where the temperature can be less than 0°C or where it is exposed to the weather.
· Always keep the appliance vertical when it is being moved.
· Make sure that there is air circulation between the appliance and the floor.
· Remove all the packaging and the transit bolts.
· The floor area on which the appliance is to be installed must be flat, stable, heat resistant and clean.
· Keep the transit bolts in a safe place. If the appliance is to be moved in the future they must be reattached to lock the drum to prevent an internal damage.
· Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
· Do not install or use a damaged appliance.
· Do not install the appliance where the appliance door cannot be fully opened.

· Adjust the feet to have the necessary space between the appliance and the flooring.
· When the appliance is in its permanent position, check if it is levelled correctly with the aid of a spirit level. If it is not, adjust the feet accordingly.
2.2 Electrical Connection
WARNING! Risk of fire and electric shock.
· WARNING: This appliance is designed to be installed / connected to a grounding connection in the building.
· Always use a correctly installed shockproof socket.
· Do not use multi-plug adapters and extension cables.
· Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
· Do not touch the mains cable or the mains plug with wet hands.
2.3 Water Connection
· The inlet water shall not exceed 25 °C.
· Do not cause damage to the water hoses.

· Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
· Ensure that there are no visible water leaks during and after the first use of the appliance.
· Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for the replacement of the inlet hose.
· When unpacking the appliance, It is possible to see water flowing from the drain hose. This is due to the testing of the appliance with the use of water in the factory.
· You can extend the drain hose to maximum 400 cm. Contact the Authorised Service Centre for the other drain hose and the extension.
· Make sure that there is access to the tap after the installation.
2.4 Use
WARNING! Risk of injury, electric shock, fire, burns or damage to the appliance.
· Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
· Do not touch the glass door while a programme operates. The glass can get hot.
· Do not dry damaged (torn, frayed) items that contain padding or fillings.
· If laundry has been washed with a stain remover, carry out an additional rinse cycle before starting a drying cycle.
· Make sure that all metal objects are removed from the laundry.
· Dry only fabrics that are suitable to dry in the appliance. Follow the cleaning instruction on the item label.
· Do not sit or stand on the open door of the appliance.
· Do not dry dripping wet clothes in the appliance.
· Do not let hot items to touch the plastic parts of the appliance.

ENGLISH 7
· Remove a detergent ball (if used) before starting a drying programme.
· Do not use a detergent ball if setting a non-stop programme.
2.5 Service
· To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
· Please note that self-repair or nonprofessional repair can have safety consequences and might void the guarantee.
· The following spare parts will be available for 10 years after the model has been discontinued: motor and motor brushes, transmission between motor and drum, pumps, shock absorbers and springs, washing drum, drum spider and related ball bearings, heaters and heating elements, including heat pumps, piping and related equipment including hoses, valves, filters and aquastops, printed circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including reset software, door, door hinge and seals, other seals, door locking assembly, plastic peripherals such as detergent dispensers. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
· Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
2.6 Disposal
· Disconnect the appliance from the mains electrical and water supplies.
· Cut off the mains electrical cable close to the appliance and dispose of it.

8 www.electrolux.com

· Remove the door catch to prevent children or pets from becoming trapped in the drum.
· Dispose of the appliance in accordance with local requirements
3. PRODUCT DESCRIPTION
3.1 Appliance overview

1

2

3

for the disposal of Waste Electrical and Electronic Equipment (WEEE).

8

9

4 5
6

10 11 12

7

1 Worktop 2 Detergent dispenser 3 Control panel 4 Door handle 5 Rating plate 6 Drain pump filter 7 Feet for levelling the appliance

8 Drain hose 9 Inlet hose connection 10 Mains cable 11 Transit bolts 12 Hose support

A

B Mod. xxxxxxxxx

Prod.No. 910000000 00

C

000V ~ 00Hz 0000 W

D

00A
00000000

The rating plate reports the model name (A) , product number (B), electrical ratings (C) and serial number (D).

TECHNICAL DATA

Dimension

Width/ Height/ Total depth

59.7 cm /84.7 cm /57.3 cm

ENGLISH 9

Electrical connection

Voltage Overall power Fuse Frequency

230 V 2000 W 10 A 50 Hz

Level of protection against ingress of solid parti- IPX4 cles and moisture ensured by the protective cov- er, except where the low voltage equipment has no protection against moisture

Water supply 1)

Cold water

Water supply pressure Minimum Maximum

0.5 bar (0.05 MPa) 10 bar (1.0 MPa)

Maximum wash load Cotton

8.0 kg

Maximum dry load

Cotton Synthetics

5.0 kg 3.0 kg

Spin Speed

Maximum spin speed 1600 rpm

1. Connect the water inlet hose to a water tap with a 3/4” thread.

INSTALLATION

WARNING! Refer to Safety chapters.

5.1 Unpacking

1

1. Open the door. Remove all the items from the drum.

2

Accessories delivered with the appliance may vary depending on the model.
2. Put the packaging element on the floor behind the appliance and carefully put it down onto its rear side. Remove the polystyrene protection from the bottom.

CAUTION! Do not lay washing machine on its front.
3. Put the appliance back into an upright position. Remove the power supply cable and the drain hose from the hose holders.

10 www.electrolux.com
It is possible to see water flowing from the drain hose. This is because the washing machine has been tested at the factory. 4. Remove the three transit bolts and pull out the plastic spacers.
We recommend that you keep the packaging and the transit bolts for any transport of the appliance. 5. Put the plastic caps, that you find in the user manual bag, in the holes.

WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.
The inlet hose
CAUTION! Make sure there is no damage to hoses and there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for a replacement inlet hose.
1. Connect the water inlet hose to the back of the appliance.
45º 20º

5.2 Information for installation
Positioning and levelling
Adjust the appliance correctly to prevent vibration, noise and movement of the appliance when it operates.
1. Install the appliance on a flat hard floor. The appliance must be levelled and stable. Make sure that the appliance does not touch the wall or other units and there is air circulation below the appliance.
2. Loosen or tighten the feet to adjust the level. All feet must rest firmly on the floor.

2. Position it toward left or right depending on the positon of the water tap. Make sure that the inlet hose is not in vertical position.
3. If necessary, loosen the ring nut to set it in the correct position.
4. Connect the water inlet hose to the cold water tap with 3/4” thread.

WARNING! The inlet water shall not exceed 25 °C.
Water drainage
The drain hose should stay at a height of no less than 60 cm and not more than 100 cm.
You can extend the drain hose to maximum 400 cm. Contact the authorised service centre for the other drain hose and the extension.
It is possible to connect the drain hose in different ways:
1. Make a U shape with the drain hose and put it around the plastic hose guide.

ENGLISH 11
3. If the end of the drain hose looks like this (see the picture), you can push it directly into the stand pipe.
4. To a stand pipe with vent hole – Insert the drain hose directly into a drain pipe. Refer to the illustration.

2. On the edge of a sink – Fasten the guide to the water tap or to the wall.
Make sure that the plastic guide cannot move when the appliance drains and the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance.

The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm min. 1.5″) must be larger than the external diameter of the drain hose.
5. Without the plastic hose guide, to a sink spigot- Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration.

12 www.electrolux.com
Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink.
1
ø16
2
W011

The rating plate and the ‘Technical Data’ chapter indicate the necessary electrical ratings. Make sure that they are compatible with the mains power supply.
Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use.
Connect the appliance to an earthed socket.

Connect the drain hose to the spigot and tighten it with a clamp. Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink.
6. Position the hose directly to a built-in drain pipe in the room wall and tighten it with a clamp.

The power supply cable must be easily accessible after installing the appliance.
For any electrical work required to install this appliance, contact our Authorised Service Centre.
The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.

5.3 Electrical connection
At the end of installation you can connect the mains plug to the mains socket.

ACCESSORIES

6.1 Available in www.electrolux.com/shop or from authorised dealer

Only appropriate accessories approved by ELECTROLUX ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated.

7. CONTROL PANEL

7.1 Special features
Your new washer-dryer meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption and detergent consumption and proper care of fabric.

· SteamCare system, thanks to FreshScent steam programme, offers the perfect solution for refreshing even the most delicate garments without washing. Use the delicate fragrance exclusively developed by ELECTROLUX to add a pleasant

feeling of “just-washed” garment to the removing odours and wrinkles action. · Thanks to the Soft Plus option, the fabric softener is uniformly spread out in the laundry and deeply penetrates the fabric fibres favouring a perfect softness.
7.2 Control panel description

ENGLISH 13
· The SensiCare System detects the laundry load size defining the programme duration in 30 seconds. The washing programme is tailored to the laundry load and the type of fabric without consuming more time, energy and water than necessary.

1

23

4

56

7

14
The permanent options are set by holding pressed the relative button for at least 3 seconds.
1 Programme dial 2 Spin touch button 3 Temperature touch button 4 Display 5 Time Dry touch button 6 Auto Dry touch button 7 Start Pause touch button 8 Delay Start touch button

13 12 11 10 9 8
9 Mode Dry touch button and permanent Anti-crease option
10 Time Manager touch button and permanent Child Lock option
11 Stain touch button and permanent Soft Plus option
12 Prewash touch button and permanent Extra Rinse option
13 Mode Wash touch button 14 On/Off push button

14 www.electrolux.com
7.3 Display

The Temperature area: Temperature indicator . Cold water indicator.
Door locked indicator.

Child safety lock indicator.

The digital indicator can show:
· Programme duration (e. g. phase).

· Delay time (e. g. ).

· Cycle end (

).

· Warning code (e.g.

).

· Error indicator (

).

Time Manager indicator.

Time Dry indicator.

Steam phase indicator.

Auto Dry indicator: Iron dry Cupboard dry Extra dry
Washing phase indicator

Extra Rinse indicator.

Soft Plus indicator.

, washing and/or drying

ENGLISH 15

Drum clean indicator. This is a recommendation to perform the drum cleaning. Refer to paragraph “Cleaning the drum” in “Care and cleaning” chapter.
Anti-crease phase indicator. Read the ‘Permanent Anti-crease’ paragraph for more details.
Drying phase indicator.
The spin area: Spin speed indicator
No Spin indicator. Spin phase is off.
Rinse Hold indicator.
Maximum load indicator (refer to “The SensiCare System load detection ” paragraph).
It flashes when the laundry load exceeds the maximum declared load of the selected programme.
Add garments indicator. It lights at the beginning of the wash- ing phase, when it is still possible to pause the appliance and add more laundry.

7.4 Multilingual badges
Adhesive badges in different languages are supplied with the appliance.
The desired badge can be glued next to the programme dial.

UltraWash Denim Outdoor Villa Silkki
Koneen puhdistus Anti-Allergy

Puuvilla
Puuvilla Synteettiset
Hienopesu Pika 14 min.
Huuhtelu Tyhjennys/Linkous

8. DIAL AND BUTTONS
8.1 Introduction
The options/functions are not available with all washing programmes. Check the compatibility between options/functions and washing programmes in the “Programme Chart”. An option/function can exclude another one, in this case the appliance doesn’t allow you to set incompatible options/ functions.

8.2 On/Off
Press this button for a few seconds to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off.
As the Stand-by function automatically deactivates the appliance after several minutes to reduce the energy consumption, you may need to activate the appliance again.
For more details, refer to Stand-by paragraph in Daily Use chapter.

16 www.electrolux.com
8.3 Temperature
When you select a washing programme, the appliance automatically proposes a default temperature.
Touch this button repeatedly until the desired temperature value appears on the display.
When the display shows the indicators , the appliance does not heat the
water.
8.4 Spin
When you set a programme, the appliance automatically sets the maximum spin speed allowed, except for programme Denim. With this option you can decrease the default spin speed.
Touch repeatedly this button to: · Decrease the spin speed. The
display shows only the spin speeds available for the set programme. · Additional spin options No Spin
. Set this option to deactivate all spin phases. The appliance performs the only draining phase of the selected washing programme. Set this option for very delicate fabrics. The rinses phase uses more water for some washing programmes
· Activate the Rinse Hold option. The final spin is not performed. The water of the last rinse is not drained out to prevent the fabrics from creasing. The washing programme ends with water in the drum.
The indicator is on display. The door stays locked and the drum turns regularly to reduce creasing. You must drain the water to unlock the door.
If you touch the Start Pause button, the appliance performs the spinning phase and drains the water.
The appliance empties the water out automatically after 18 hours approximately.

8.5 Mode Wash
This button allows to activate or deactivate the washing mode. When the washing mode is activated, the button indicator is on.
8.6 Prewash
With this option you can add a prewash phase to a washing programme.
The corresponding indicator above the touch button illuminates.
· Use this option to add a pre-wash phase at 30 °C before the washing phase. This option is recommended for heavily soiled laundry, especially if containing sand, dust, mud and other solid particles.
The options can increase the programme duration.
8.7 Permanent Extra Rinse
With this option you can permanently have an extra rinse when you set a new programme.
To activate/deactivate this option, hold the Prewash button pressed for 3
seconds until the indicator comes on/ goes off on the display.
When it is activated, the appliance will default to this option after you switch it off or change/reset the programme.
This option increases the programme duration.
8.8 Stain
Touch this button to add the stain phase to a programme.
The corresponding indicator above the touch button illuminates.
Use this option for laundry with hard stains to remove.
When you set this option, put the stain
remover into compartment .

ENGLISH 17

Eco 40-60 Cotton Synthetics

This option increases the programme duration. This option is not available with a temperature lower than 40 °C.

indicator

8.9 Permanent Soft Plus
Set this option to optimise the fabric softener distribution and improve fabric softness.
Recommended when you use fabric softener.
To activate/deactivate this option , hold the Stain button pressed for 3 seconds
until the indicator comes on/goes off on the display.
When it is activated, the appliance will default to this option after you switch it off or change/reset the programme.
This option increases the programme duration.
8.10 Time Manager
With this option you can reduce the programme duration depending on the load size and the degree of soiling.
When you set a washing programme, the display shows the default duration and
dashes.
Touch Time Manager button to reduce the programme duration according to your needs. The display shows the new programme duration and a number of dashes will decrease accordingly:
suitable for a full load of normally soiled garments.
a quick cycle for a full load of lightly soiled garments.
very quick cycle for a smaller lightly soiled load (max. half load recommended).
the shortest cycle to freshen up a small amount of laundry.
The Time Manager is available only with the programmes in the table.

1. Default duration for all programmes.

Time Manager with steam

programmes

When setting a steam programme, this button allows to chose three steam levels and the programme duration is reduced accordingly:

·

: maximum.

·

: medium.

·

: minimum.

8.11 Child Lock
With this option you can prevent children from playing with the control panel.
To activate/deactivate this option, hold the Time Manager button pressed until
the indicator comes on/goes off on the display.
When it is activated, the appliance will default to this option after you switch it off or change/reset the programme. If
you press any button, the indicator blinks to indicate that the buttons are disabled.

8.12 Mode Dry
This button allows to activate or deactivate the drying mode. When the drying mode is activated, the button indicator is on.

18 www.electrolux.com
8.13 Permanent Anti-crease

This option adds a short anti-crease phase at the end of the programme.
This phase reduces fabric creasing and facilitates the fabric ironing.
To activate/deactivate this option, hold the Mode Dry button pressed for 3
seconds until the indicator comes on/goes off on the display.
When it is activated, the appliance will default to this option after you switch it off or change/reset the programme.
This option can increase the programme duration.

When the programme stops the display

shows

,the indicator and the

Start Pause led are lit. The drum performs smooth movements for about 30 minutes to keep the steam benefit. By touching any button the anti-crease movements stop and the door unlocks, the appliance proposes again the previous set programme.

To interrupt the anti-crease phase, you can also: · Press the On/Off button for a few
seconds to activate or the deactivate the appliance. · Turning the programme dial in another position.

A small laundry load helps to reach better results.

8.14 Time Dry
Touch this button to set the time that suits the fabrics you have to dry (refer to

“Timed drying” table). The display shows the set value.
Each time you touch this button the time value increases by 5 minutes.
You cannot set all time values for different types of fabrics.

8.15 Auto Dry
Touch this button to set one the automatic dryness levels proposed by the appliance.
On the display the relevant dryness indicator goes on:

·

Iron dry: laundry to be ironed.

·

Cupboard dry: laundry to be put

in store.

·

Extra dry: laundry to be fully dried.

You can not set all automatic levels for each type of fabrics.

8.16 Delay Start
With this option you can delay the start of a programme to a more convenient time.
Touch the button repeatedly to set the required delay. The time increases in steps of 1 hour up to 20 hours.
The display shows the selected delay
time. After touching the Start Pause button, the appliance begins the countdown and the door is locked.

8.17 Start Pause
Touch the Start Pause button to start, pause the appliance or interrupt a running programme.

PROGRAMMES

Programme Chart

ENGLISH 19

Programme Default tem- perature Temperature range

Reference spin speed Spin speed range

Maxi- mum load

Programme description (Type of load and level of soiling)

Eco 40-60 (Wash only mode)
40 °C1)

1600 rpm 8.0 kg White cotton and fast-coloured cotton.

1600 rpm –

Normally soiled items.

400 rpm

Eco 40-60 + Cupboard dry level (Wash & Dry mode)
40 °C2)

1600 rpm 5.0 kg 1600 rpm 1000 rpm

Eco 40-60 + Cupboard dry level (Dry only mode)

5.0 kg White cotton and fast-coloured cotton. –

Cotton 40 °C 90 °C – Cold

1600 rpm 8.0 kg White cotton and coloured cotton. Normal-

(1600- 400

ly, heavily and lightly soiled items.

rpm)

Synthetics 40 °C 60 °C – Cold

1200 rpm (1200 400 rpm)

3.0 kg

Synthetic items or mixed fabric items. Nor- mally soiled items.

Delicate 30 °C 40 °C – Cold

1200 rpm 2.0 kg Delicate fabrics such as acrylics, viscose

(1200- 400

and mixed fabrics requiring gentler wash-

rpm)

ing. Normally and lightly soiled items.

Wool 40 °C 40 °C – Cold

1200 rpm (1200 400 rpm)

1.5 kg

Machine washable wool, hand washable wool and other fabrics with «hand washing» care symbol3).

20 www.electrolux.com

Programme Default tem- perature Temperature range

Reference spin speed Spin speed range

Maxi- mum load

Programme description (Type of load and level of soiling)

Steam programme Steam programme can be used for reducing wrinkles and odours4) of garments that just need to be refreshed, avoiding washing. The fabric fibres are relaxed and after- wards ironing becomes effortless. When the programme is completed, quickly re- move the laundry from the drum5). Steam programmes do not perform any hygienic cycle. Do not set this programme with the following type of items: · Items that are not suitable for tumble drying. · Items with label “Dry clean only”.
FreshScent System ELECTROLUX fragrance. If you use this special gentle fragrance, your laundry will scent as just washed. Read carefully the instructions supplied with the fragrance. Re- duce the fragrance dosage when treating smaller load. By means of the Time Man- ager button, you can reduce the programme duration when treating items labeled to be washed at low temperature. DO NOT: · Tumble dry the garments treated with fragrance. Its benefit would evaporate. · Use the fragrance with different purposes than those here described. · Use the fragrance on new garments. New garments may contain residual finishing
compounds which are not compatible with it.
The fragrance is available on ELECTROLUX web shop or by authorised dealer.

FreshScent

1.0 kg Cottons, Synthetics, Delicates. Short and

gentle steam programme to refresh even your

very delicate garments, including very delicate

garments with sequins, lace etc. When treat-

ing smaller loads, the programme duration

–

can be further reduced by means of the Time Manager option.

WARNING! Do not use this programme with wool and garments labelled as dry- clean only.

Spin/Drain

1600 rpm (1600 400 rpm)

8.0 kg

All fabrics, except woollens and delicate fabrics. To spin the laundry and to drain the water in the drum.

ENGLISH 21

Programme Default tem- perature Temperature range Rinse

Reference spin speed Spin speed range

Maxi- mum load

Programme description (Type of load and level of soiling)

1600 rpm 8.0 kg (1600- 400 rpm)

All fabrics, except woollens and very deli- cate fabrics. Programme for rinsing and spin- ning the laundry. The default spin speed is the one used for cotton programmes. Reduce the spin speed according to the type of laundry. If necessary, set the Extra Rinse option to add rinses. With a low spin speed, the appliance performs delicate rinses and a short spin.

1200 rpm

Machine Clean (1200 –

60 °C

400 rpm)

Maintenance cycle with hot water to clean and freshen the drum and to remove residue that may cause odour. For the best result use this cycle once a month. Before running this cycle, remove all items from the drum. In the wash- ing phase compartment of the detergent dis- penser, put the flap of the compartment in up- ward position. Pour a cup of chlorine bleach or a washing machine cleaner in the washing – phase compartment. DO NOT use both to- gether.
After the drum cleaning, run a fur- ther rinse cycle with empty drum and no detergent to remove any residue of bleach.

If you set this programme with the Mode Dry, the appliance performs the anti- fluff action. Refer to chapter ‘Fluff in the fabrics’.

Anti-Allergy 60 °C

1600 rpm (1600 400 rpm)

8.0 kg

White cotton items. This high-performance wash program combined with steam vapour, removes more than 99,99% of bacteria and vi-
ruses6) keeping the temperature above 60°C throughout the washing phase; with an addi- tional action on the fibers thanks to a vapour phase, an enhanced rinsing phase ensures a proper removal of detergent and micro-organ- ism residues. This program ensures also a proper reduction of pollens/allergenic items.

22 www.electrolux.com

Programme Default tem- perature Temperature range
Outdoor 30 °C 40 °C – Cold

Reference spin speed Spin speed range

Maxi- mum load

1200 rpm 2.0 kg (1200- 400 rpm)

Programme description (Type of load and level of soiling)
Do not use fabric softener and make sure that there is no soften- er residue in the detergent dis- penser.

Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner in- sulation.
By performing a combined wash and dry programme, the drying phase also acts as water-repel- lent restorer. Make sure that the garment care label permits tumble drying.

Denim 30 °C 40 °C – Cold
MixCare 30 °C 60 °C – 30 °C

1200 rpm (1200 400 rpm)
1600 rpm (1600 400 rpm)

Quick 20′ Wash&Dry 60′ 30 °C 40 °C – 30 °C

1200 rpm

3.0 kg 5.0 kg
1.0 kg

Special programme for Denim clothing with delicate washing phase to minimize colour fading and marks. For better care a reduced load size is recommended.
Programme to treat mixed fabrics (cotton and synthetic items) up to 5 kg. Complete wash- ing programme that washes the daily soiled laundry efficiently at 30 °C and ensures a good performance in only 69 minutes. Add a drying phase to have a complete wash&dry treatment.
Programme to treat up to 1 kg of mixed syn- thetic shirts load in 20 minutes only. Add a drying phase to have a complete wash&dry treatment in 60 minutes.

ENGLISH 23

Programme Default tem- perature Temperature range

Reference spin speed Spin speed range

Maxi- mum load

Programme description (Type of load and level of soiling)

Reset position. The display shows dashes only.

1. According to Commission Regulation EU 2019/2023. This programme at default tem- perature and spin speed, in washing only mode, with rated capacity 8.0 kg is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.
   For the reached temperature in the laundry, the programme duration and other data, please refer to ‘Consumption Values’ chapter. The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.

2. According to Commission Regulation EU 2019/2023. This programme at default tem- perature and spin speed, in washing and drying mode, with rated capacity 5.0 kg and with Cupboard dry level performs the wash and dry cycle able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle and, after drying phase, the laundry can be immediately stored in a cupboard. 3) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn’t rotate or doesn’t rotate properly, but this is normal for this programme. 4) Steam programme doesn’t remove particularly intense odour. 5) After the steam treatment the laundry can be humid. Hang items out for a few minutes. 6) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomo- nas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testma- terialien AG in 2021 (Test Report No. 202120117).
   Programme options compatibility
   Programme

Spin No Spin Prewash 1) Stain Time Manager Delay Start

Eco 40-60 Cotton Synthetics Delicate

24 www.electrolux.com
Programme

Spin No Spin Prewash 1) Stain Time Manager Delay Start

Wool FreshScent Spin/Drain Rinse Machine Clean Anti-Allergy Outdoor Denim MixCare

Quick 20′ Wash&Dry 60′

1. Prewash and Stain cannot be selected together. 2) If you set the No Spin option, the appliance performs draining only.

Suitable detergents for each programme

Programme Universal powder1)

Liquid Uni- Liquid for Delicates

versal

coloureds woollens

Eco 40-60

—

Cotton

—

Synthetics

—

Delicate

—

—

—

Special —

ENGLISH 25

Programme Universal powder1)

Liquid Uni- Liquid for Delicates

versal

coloureds woollens

Special

Wool

—

—

—

Anti-Allergy

—

—

Outdoor

—

—

—

Denim

—

—

MixCare

—

—

Quick 20′

Wash&Dry

—

—

—

60′

1. At temperature higher than 60 °C the use of powder detergent is recommended.

= Recommended — = Not recommended
9.2 Woolmark Wool Care – Blue
· The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool

garments labelled as “hand wash” provided that the products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M2103. · The wool drying cycle of this machine has been tested and approved by The Woolmark Company. The cycle is suitable to dry wool garments which are labelled “hand wash” provided that the garments are washed in a Woolmark endorsed hand washing cycle and dried according to the instructions issued by the manufacturer. M2104. The Woolmark symbol is a Certification mark in many countries.

9.3 Automatic drying

Initial cycle times for programmes with Auto Dry option are only estimates, the actual drying time may slightly differ from the time displayed.

Dryness Level Extra Dry For towelling materials

Type of fabric
Cottons and Linen (bathrobes, bath towels, etc)
Denim garments

Load up to 5.0 kg
up to 3.0 kg

26 www.electrolux.com

Dryness Level Cupboard Dry For items to be stored
Iron Dry Suitable for ironing

Type of fabric
Cottons and Linen (bathrobes, bath towels, etc)

Load up to 5.0 kg

Synthetics and mixed fabrics (jumpers, blouses, under- wear, household and bed linen)

up to 3.0 kg

Delicate fabrics

up to 2.0 kg

(acrylics, viscose and deli-

cate mixed fabrics)

Wool items (woollen jumpers)

up to 1.0 kg

Outdoor sporting gar-

up to 2.0 kg

ments

(outdoor clothing, technical,

sport fabrics, waterproof

and breathable jackets,

shell jackets)

Denim garments

up to 3.0 kg

Cottons and Linen

up to 5.0 kg

(sheets, tablecloths, shirts,

etc)

9.4 Timed drying

Dryness Level Type of fabric

Extra Dry For towelling materials

Cottons and Linen (bathrobes, bath towels, etc)

Denim garments
Cupboard Dry Cottons and Linen For items to be (bathrobes, bath towels, etc) stored

Load Spin Suggested (kg) speed duration
(rpm) (mins)

1400 5.0

180 – 200

3.0 1400 1.0 1400 3.0 1200 1.0 1200 5.0 1400

120 – 140 60 – 70
120 – 140 70 – 90
170 – 190

3.0 1400 1.0 1400

110 – 130 50 – 60

ENGLISH 27

Dryness Level Type of fabric

Load Spin Suggested (kg) speed duration
(rpm) (mins)

Synthetics and mixed fabrics (jumpers, blouses, underwear, household and bed linen)

3.0 1200

80 – 100

1.0 1200

45 – 55

Delicates (acrylics, viscose and delicate mixed fabrics)

2.0 1200

100 – 120

1.0 1200

60 – 80

Wool (woollen jumpers)

1.0 1200

110 – 130

Outdoor sporting garments (outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets)

2.0 1200

120 – 140

1.0 1200

80 – 90

Denim garments

3.0 1200

110 – 130

1.0 1200

60 – 80

Iron Dry Suitable for ironing

Cottons and Linen (sheets, tablecloths, shirts, etc)

5.0 1400

100 – 120

3.0 1400

65 – 85

1.0 1400

40 – 50

10. SETTINGS
10.1 Acoustic signals
This appliance has different acoustic signals, that operate when:
· You activate the appliance (special short tune).
· You deactivate the appliance (special short tune).
· You touch the buttons (click sound). · You make an invalid selection (3 short
sounds). · The programme is completed
(sequence of sounds for about 2 minutes). · The appliance has a malfunction (sequence of short sounds for about 5 minutes).

To activate/deactivate the acoustic signals when the programme is completed, touch the Mode Wash and the Prewash buttons simultaneously for about 2 seconds. The display shows On or Off.
If you deactivate the acoustic signals, they continue to operate when the appliance has a malfunction.

28 www.electrolux.com

11. BEFORE FIRST USE

1. Make sure that the electrical power is available and the water tap is open.
2. Pour 2 litres of water into the detergent compartment marked by
. This action activates the drain system. 3. Pour a small quantity of detergent
into the compartment marked by .

4. Set and start a programme for cotton at the highest temperature without any laundry in the drum.
This removes all possible dirt from the drum and the tub.

12. DAILY USE – WASHING ONLY

WARNING! Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains socket.
2. Open the water tap. 3. Press the On/Off button for a few
seconds to activate the appliance. A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door. 2. Empty the pockets and unfold the
items before you put them in the appliance. 3. Put the laundry in the drum, one item at a time. Do not put too much laundry in the drum. 4. Close the door firmly.

CAUTION! Make sure that no laundry gets caught between the seal and the door to avoid risk of water leakage and damage to the laundry.
Washing heavily oiled, greasy stains could cause damage to rubber parts of the washing machine.
12.3 Filling the detergent and additives

– Compartment for prewash phase, soak programme or stain re- mover.
– Compartment for washing phase.

ENGLISH 29

– Compartment for fabric softener and other liquid treatments(fabric condi- tioner, starch).
– Maximum level for quantity of liquid additives.
– Flap for powder or liquid deter- gent.

1 2

Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ( ). This quantity will however guarantee the best washing results.
After a washing cycle, if necessary, remove any detergent residue from the detergent dispenser.
12.4 Check the position of the detergent flap
1. Pull out the detergent dispenser until it stops.

4. To use liquid detergent, turn the flap down.
With the flap in the position DOWN: · Do not use gelatinous or thick
liquid detergents. · Do not exceed to liquid detergent
dose indicated on the flap. · Do not set the prewash phase. · Do not set the delay start function. 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dispenser.

2. Press the lever down to remove the dispenser.
3. To use powder detergent, turn the flap up.

Make sure that the flap does not cause a blockage when you close the drawer.

30 www.electrolux.com

12.5 Setting a programme
1. Turn the programme dial to select the desired washing programme. The first programme on the top right of the programme dial is Eco 40-60, the programme to which the information of the energy label relates.
The indicator of Mode Wash button illuminates.
The indicator of the Start Pause button flashes. The display shows an indicative programme duration. 2. To change the temperature and/or
the spin speed, touch the related buttons. 3. If desired, set one or more options by touching the related buttons. The related indicators will light up and the given information will change on the display accordingly.
If a selection is not possible an acoustic signal sounds and the display shows
.
12.6 Starting a programme
Touch the Start Pause button to start the programme. It is not possible to start the programme when the indicator of the button is off and doesn’t flash (e.g. the door is open). The related indicator stops flashing and stays on. The programme starts, the door is locked. The display shows the indicator
.
The drain pump can operate shortly before the appliance fills water.
12.7 Starting a programme with the delay start
1. Touch the Delay Start button repeatedly until the display shows the desired delay time.
2. Touch the Start Pause button. The appliance door locks and starts the countdown of the delay start. The
display shows the indicator .

When the countdown is completed, the programme starts automatically.
Cancelling the delay start after the countdown has started
To cancel the delay start:
1. Touch the Start Pause button to pause the appliance. The related indicator flashes.
2. Touch the Delay Start button repeatedly until the display shows .
3. Touch the Start Pause button again to start the programme immediately.

Changing the delay start after the countdown has started
To change the delay start:
1. Touch the Start Pause button to pause the appliance. The related indicator flashes.
2. Touch the Delay Start button repeatedly until the display shows the desired delay time.
3. Touch the Start Pause button again to start the new countdown.
12.8 The SensiCare System load detection
The programme duration in the display is referred to a medium/high load.

After touching the Start Pause button, the maximum declared load indicator goes off, the SensiCare System starts the laundry load detection:

1. The appliance detects the load in the first 30 seconds. In the programmes where Time Manager is available, during this phase the Time Manager

bars

placed below the time

digits play a simple animation. The

drum rotates shortly.

2. The programme duration could be

adjusted accordingly and could

increase or decrease. After further 30

seconds, the water filling starts.

At the end of the load detection, in case

of drum overload, the indicator

is

flashing in the display:

In this case, for 30 seconds, it is possible to pause the appliance and remove the exceeding garments.

Once removed the exceeding garments,

touch the Start Pause button to start the programme again. The SensiCare phase can be repeated up to three times (see point 1).

Important! If the laundry amount will not be reduced, the washing programme starts anyway, despite the overload. In this case, it will be not possible to guarantee the best washing results.

About 20 minutes after the programme start, the programme duration could be adjusted again depending on the capacity of water absorption of the fabrics.

The SensiCare detection is carried out with complete washing programmes only and if the programme duration has not been reduced by means of the Time Manager button.

The SensiCare System is not available with all programmes such as :Wool, Rinse and programmes with short cycles.

12.9 Interrupting a programme and changing the options
When the programme is running, you can change only some options:
1. Touch the Start Pause button. The related indicator flashes. 2. Change the options. The given
information in the display changes accordingly.
3. Touch the button Start Pause again.
The washing programme continues.

ENGLISH 31
12.10 Cancelling a running programme
1. Press the button On/Off to cancel the programme and to deactivate the appliance.
2. Press the button On/Off again to activate the appliance.
If the SensiCare System has completed and the water filling has already started, the new programme starts without repeating the SensiCare System. The water and the detergent are not drained out in order to avoid waste. The display shows the maximum duration of the programme, updating it about 20 minutes after the starting of the new programme.
There is also an alternative way of cancelling: 1. Rotate the selector knob to the “Reset”
position . 2. Wait for 1 second. The display shows
. Now, you can set a new washing programme.
12.11 Opening the door Adding garments
If the temperature and level of the water in the drum are too high and/or the drum is still rotating you should not open the door.
While a programme or the delay start operates, the appliance door is locked.
The display shows the indicator .
1. Touch the Start Pause button. In the display the related door lock indicator goes off. 2. Open the appliance door. If
necessary, add or remove the items. Close the door and touch the Start
Pause button. The programme or the delay start continues.

32 www.electrolux.com

12.12 End of the programme
When the programme has finished, the appliance stops automatically. The acoustic signals operate (if they are
active). The display shows

The indicator of the Start Pause button goes off.

The door unlocks and the indicator goes off.
1. Press button On/Off to deactivate the appliance.
After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance.
When you activate the appliance again, the display shows the end of the previous programme. Turn the programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty. 4. Keep the door and the detergent
dispenser slightly ajar to prevent mildew and odours.

12.13 Draining water out after end of cycle
If you have chosen a programme or an option that does not empty out the water of the last rinse, the programme is completed, but:

· The time area shows

and the

display shows the door locked .

· The indicator of the Start Pause button starts flashing.
· The drum still turns at regular intervals to prevent creases in the laundry.
· The door stays locked. · You must drain the water to open the
door:

1. If necessary, touch the Spin button to decrease the spin speed proposed by the appliance.
2. Press the Start Pause button: the appliance drains the water and spins.
The option indicator Rinse Hold disappears.
If you have selected No Spin
, the appliance will only drain the water.
3. When the programme is completed
and the door locked indicator goes off, you can open the door. 4. Press the On/Off button for a few seconds to deactivate the appliance.
12.14 Stand-by function
The Stand-by function automatically deactivates the appliance to reduce the energy consumption when:
· You do not use the appliance for 5 minutes when no programme is running. Press the button On/Off to activate the appliance again.
· 5 minutes after the end of the washing programme. Press the On/Off button to activate the appliance again. The display shows the end of the last programme. Turn the programme dial to set a new cycle.
If the dial is rotated to the “Reset”
position , the appliance automatically turns off in 30 seconds.
If you set a programme or an option that ends with water in the drum, the Stand-by function doesn’t deactivate the appliance to remind you to drain the water.

13. DAILY USE – WASHING & DRYING

WARNING! Refer to Safety chapters.

This appliance is an automatic washer dryer.

ENGLISH 33

13.1 Complete wash&dry programme
Non-automatic wash&dry programmes
In some washing programmes, you can combine Mode Wash and Mode Dry for running a complete wash&dry programme.
Proceed as follows:
1. After loading laundry and detergent, press the On/Off button for some seconds to activate the appliance.
2. Load the laundry one item at a time. 3. Put the detergent and the additives in
the appropriate compartment. 4. Turn the programme dial to the
washing programme. The appliance defaults to the washing only mode and the indicator of the Mode Wash button is on. The display shows the default temperature and spin. If necessary, change them according to your laundry. The display also shows the maximum recommended load for washing phase. 5. Set the desired options, if there are available. 6. Tap on the Mode Dry button to activate also the drying function. Both indicators of the Mode Wash and Mode Dry buttons are on. The
indicators and appear on the display. The display also shows the maximum recommended load for a washing and drying programme (e.g. 5.0 kg for cottons).
13.2 Washing and Drying Automatic levels
1. Tap on the Auto Dry button repeatedly until the display shows the required dryness level. The indicators in the display illuminate accordingly:
a. Iron dry: for cotton items;
b. Cupboard dry: for cotton and synthetic items;
c. Extra dry: for cotton items. The time value on the display is the duration of both cycles washing and

drying, calculated on a default load size.
To have a good drying by using less energy and in a shorter time, the appliance does not let you set a too low spin speed for the items to be washed and dried.
2. Touch button Start Pause to start the programme. The SensiCare estimation starts.
In the display the door locked indicator comes on. The display also shows the remaining programme time.

13.3 Washing and Timed Drying
1. Tap on the Time Dry button repeatedly to set the desired time value (see the “Timed drying” table the “Programmes” chapter). The
drying level indicator goes off and
the indicator comes on. Each time you tap on this button the time value increases by 5 minutes. The display shows the set new time value.
2. Touch the Start Pause button to start the programme. The SensiCare estimation starts.
In the display the door locked indicator comes on. The display also shows the remaining programme time.

13.4 At the end of the drying programme

· The appliance stops automatically. · The acoustic signals operate (if they
are active).

· In the display

comes on.

· The indicator of the Start Pause

button goes off. The door locked

goes off. The appliance continues to operate with the anti-crease phase for approximately 30 minutes or more if Anti-crease option was set. The anti- crease phase reduces creasing.

34 www.electrolux.com

You can remove the laundry before the anti-crease phase is completed. We recommend, for better results, that you remove the laundry when the phase is almost completed or
completed. The indicator remains lit. · Press the On/Off button for some seconds to deactivate the appliance.
After some minutes from the end of the programme, the energy saving function deactivates the appliance automatically.

1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum, the seal and the inside of the door with a wet cloth.

14. DAILY USE – DRYING ONLY

WARNING! Refer to Safety chapters.
This appliance is an automatic washer dryer.
14.1 Preparation to drying
1. Press the On/Off button for some seconds to activate the appliance.
2. Load the laundry one item at a time. 3. Turn the programme dial to the
programme suitable for the items to dry. The appliance defaults to the washing only mode and the indicator of the Mode Wash button is on. 4. Tap on the Mode Dry button and then on the Mode Wash button to perform drying only. The indicator of Mode Dry button illuminates and the indicator of Mode Wash button goes
off. The indicators and appear
on the display and the indicator disappears.
When drying a big amount of laundry, to have good drying performances, make sure that the laundry itself is not rolled up and that is uniformly distributed in the drum.

14.2 Drying – Automatic levels

1. Tap on the Auto Dry button repeatedly until the display shows the required dryness level. The indicators in the display illuminate accordingly:

a. Iron dry: for cotton items; b. Cupboard dry: for cotton and
synthetic items;

c. Extra dry: for cotton items. The display shows the drying programme duration.

2. Touch the Start Pause start the programme.

button to

In the display the door locked indicator comes on. The display also shows the remaining programme time.

14.3 Timed Drying

1. Tap on the Time Dry button repeatedly to set the desired time value (see the “Timed drying” table the “Programmes” chapter). The

drying level indicator goes off and

the indicator comes on. Each time you tap on this button the time value increases by 5 minutes. The display shows the set new time value.

2. Touch the Start Pause the programme.

to start

In the display the door locked indicator comes on. The display also shows the remaining programme time.

14.4 At the end of the drying programme

· The appliance stops automatically. · The acoustic signals operate (if they
are active).

· In the display

comes on.

· The indicator of the Start Pause

button goes off. The door locked

goes off. The appliance continues to operate with the anti-crease phase for approximately 30 minutes or more if Anti-crease option was set. The anti- crease phase reduces creasing. You can remove the laundry before the anti- crease phase is completed.

15. FLUFF IN THE FABRICS

During the washing and/or drying phase, some types of fabric, (sponge, wool, sweatshirt) could release fluff.
The released fluff could stick to the fabrics during the next cycle.
This inconvenient increases with technical fabrics.
To prevent the fluff in your laundry, we recommend that you:
· To do not wash dark fabrics after you washed and dried light coloured fabrics (hand towel, wool, sweatshirt ) and the contrary.
· To dry this type of fabrics at open air when they are washed the first time.
· To clean the drain filter. · After the drying phase, clean the
empty drum, the gasket and the door with a wet cloth.

16. HINTS AND TIPS

WARNING! Refer to Safety chapters.

ENGLISH 35
We recommend, for better results, that you remove the laundry when the phase is almost completed or
completed. The indicator remains lit. · Press the On/Off button for some seconds to deactivate the appliance.
After some minutes from the end of the programme, the energy saving function deactivates the appliance automatically.
1. Remove the laundry from the appliance.
2. Make sure that the drum is empty.
After drying phase, clean the drum, the seal and the inside of the door with a wet cloth.

To remove the fluff inside the drum, set a special programme: · Empty the drum. · Clean the drum, the gasket and the
door with a wet cloth. · Set the Machine Clean programme
and the Mode Dry together to activate the anti-fluff action.

· Touch the Start Pause start the programme.

button to

If the appliance is frequently used, carry out the cleaning programme regularly.

16.1 The laundry load
· Divide the laundry into: white, coloured, synthetics, delicates and wool.

36 www.electrolux.com
· Follow the washing instructions on the laundry care labels.
· Do not wash white and coloured items together.
· Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first couple of times.
· Turn multilayered fabrics, wool and items with printed illustrations inside out.
· Pre-treat stubborn stains. · Wash stubborn stains with a special
detergent. · Be careful with curtains. Remove the
hooks and put the curtains in a washing bag or pillowcase. · A very small load can cause balance problems with the spin phase leading to excessive vibration. If this occurs: a. interrupt the programme and
open the door (refer to “Daily Use” chapter); b. manually redistribute the load so that the items are spaced evenly around the tub; c. press the Start Pause button. The spin phase continues. · Button up pillowcases, close zippers, hooks and poppers. Tie up belts, cords, shoelaces, ribbons and any other loose elements. · Do not wash laundry without hems or with cuts. Use a washing bag to wash small and/or delicate items (e.g. underwired bras, belts, tights, shoelaces, ribbons, etc. ).
· Empty pockets and unfold the items.

16.2 Stubborn stains
For some stains, water and detergent is not sufficient. We recommend that you pre-treat these stains before you put the items in the appliance. Special stain removers are available. Use the special stain remover that is applicable to the type of stain and fabric. Do not spray stain remover on garments near the appliance as it is corrosive to the plastic parts.
16.3 Detergent type and quantity
The choice of detergent and use of correct quantities not only affects your wash performance, but also helps to avoid waste and protect the environment: · Use only detergents and other
treatments specially made for washing machines. First, follow these generic rules: ­ powder detergents (also tablets
and single-dose detergents) for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization, ­ liquid detergents (also single-dose detergents) , preferably for low temperature wash programmes

(60 °C max) for all types of fabric, or special ones for woollens only. · The choice and quantity of detergent will depend on: type of fabric (delicates, woollens, cottons, etc), the colour of clothes, size of the load, degree of soiling, wash temperature and hardness of the water used. · Follow the instructions that you find on packaging of the detergents or other treatments without exceeding

the indicated maximum level (

).

· Do not mix different types of

detergents.

· Use less detergent if:

­ you are washing a small load,

­ the laundry is lightly soiled,

­ there is large amounts of foam

during washing.

· When using detergent tabs or pods,

always put them inside the drum, not

in the detergent dispenser and follow

the manufacturer’s

recommendations .

Insufficient detergent may cause:

· unsatisfactory washing results,

· the wash load to turn grey,

· greasy clothes,

· mould in the appliance.

Excessive detergent may cause: · sudsing, · reduced washing effect, · inadequate rinsing, · a greater impact for the environment.

16.4 Ecological hints
To save water, energy and to help protect the environment, we recommend that you follow these tips:
· Normally soiled laundry may be washed without prewash in order to save detergent, water and time (the environment is protected too!).
· Loading the appliance to the maximum capacity indicated for each programmes helps to reduce energy and water consumption.
· With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
· To use the correct quantity of detergent, refer to the quantity suggested by the detergent producer

ENGLISH 37
and check the water hardness of you domestic system. Refer to ‘Water hardness’. · Set the maximum possible spin speed for the selected programme for saving energy during drying phase!
16.5 Water hardness
If the water in your area is hard or medium hard, we recommend that you use a water softener for washing machines.
The water is hard or medium hard when the hardness exceeds 8dH.
In areas where the water is soft it is not necessary to use a water softener.
To find out the water hardness in your area, contact your local water authority.
Use the correct quantity of water softener. Follow the instructions that you find on the packaging of the product.
16.6 Prepare the drying cycle
· Open the water tap. · Check if the drain hose is connected
properly. Refer to installation chapter for more information. · For the maximum laundry load of the drying programmes, refer to the drying programmes table.
16.7 Items not suitable for drying
Do not set a drying programme for this laundry: · Synthetic curtains. · Pieces of clothing with metal inserts. · Nylon stockings. · Quilts. · Bed covers. · Duvets. · Anoraks. · Sleeping bags. · Fabrics with residue of hair sprays,
nail solvents or similar. · Garments with foam-rubber or
materials similar to foam-rubber.

38 www.electrolux.com
16.8 Garment labels
When you dry the laundry, obey the indications on the labels of the manufacturers:
· = The item can be tumble dried · = The drying cycle is at high
temperature · = The drying cycle is at reduced
temperature · = The item can not be tumble
dried.
16.9 Drying cycle duration
The drying time can change depending on: · speed of the last spin · dryness level · type of laundry · weight of the load
16.10 Additional drying
If, at the end of the drying programme, the laundry is still damp, set a short drying cycle again.
17. CARE AND CLEANING

WARNING! To avoid creasing and shrinkage do not overdry the laundry.
16.11 General Tips
Refer to the «Drying programmes» table to find the average drying times. Experience will help you to dry the laundry better. Take note of the duration of the cycles done before.
To avoid the static charge at the end of the drying cycle:
1. Use fabric conditioner in the washing cycle.
2. Use special fabric conditioner for tumble dryers.
When the drying programme is completed remove the laundry promptly.

WARNING! Refer to Safety chapters.

17.1 Periodic cleaning schedule

Periodic cleaning helps to extend the life of your appliance.
After each cycle, keep the door and the detergent dispenser slightly ajar to get air circulation and dry the humidity inside the appliance: this will prevent mildew and odours.

If the appliance is not used for a long time: close the water tap and unplug the appliance.

Indicative periodic cleaning schedule:

Descaling

Twice a year

Maintenance wash Once a month

Clean door seal Every two months

Clean drum

Every two months

Remove fluff inside the drum

Twice a month1)

Clean detergent dispenser

Every two months

Clean drain pump Twice a year filter

Clean the inlet

Twice a year

hose and the valve

filter

1. Refer to ”Fluff in the fabrics” chapter.

The following paragraphs explain how you should clean each part.

17.2 Removing foreign objects
Make sure that pockets are empty and all loose elements are tied up before running your cycle. Refer to “The laundry load” in “Hints and tips”.
Remove any foreign objects (such as metal clip, buttons, coins, etc) that you may find in the door seal, the filters and the drum. Refer to “Door seal with double lip trap”, “Cleaning the drum”, “Cleaning the drain pump” and “Cleaning the inlet hose and the valve filter” paragraphs. If necessary, please contact the Authorised Service Centre.
17.3 External cleaning
Clean the appliance with mild soap and warm water only. Fully dry all the surfaces. Do not use a scouring pads or any scratching material.
CAUTION! Do not use alcohol, solvents or chemical products.
CAUTION! Do not clean the metal surfaces with chlorine-based detergent.
17.4 Descaling
If the water in your area is hard or medium hard, we recommend that you use a water softener for washing machines. The water is hard or medium hard when the hardness exceeds 8dH.
Regularly examine the drum to check for limescale.
Regular detergents already contain water softening agents, but we recommend to run a cycle with an empty drum and a descaling product.

ENGLISH 39
Always follow the instructions that you find on the packaging of the product.
17.5 Maintenance wash
The repeated and prolonged use of low temperature programmes can cause detergent deposits, fluff residues, bacterial growth inside the drum and the tub. This could generate bad odours and mildew. To eliminate these deposits and clean the inner part of the appliance, run a maintenance wash regularly (at least once a month).
Refer to “Cleaning the drum” paragraph.
17.6 Door seal with double lip trap
This appliance is designed with a self cleaning draining system, allowing light fluff fibers that fall off the clothes to be drained out with the water. Regularly examine the seal. Coins, buttons, other small items can be recovered at the end of the cycle.
Clean it when needed, using ammonia cream cleanser agent without scratching the seal surface.
Always obey the instructions that you find on the packaging of the product.
Check and remove objects (if there are any) that could be trapped in the fold. Make sure that no laundry remains between the seal and the door.

40 www.electrolux.com
Use a moist cloth to wipe off any dirt or water residue left behind in the door seal after completion of program cycle.
17.7 Cleaning the drum
Regularly examine the drum to prevent unwanted deposits.
Rust deposits in the drum may occur due to rusting foreign body in the washing or tap water containing iron
Clean the drum with special products for stainless steel.
Always follow the instructions that you find on the packaging of the product. Do not clean the drum with acidic descaling products, scouring products containing chlorine or iron or steel wool.
For a thorough clean:
1. Remove all laundry from the drum. 2. Run the Machine Clean programme.
For more details, refer to washing programme table. 3. Add a small quantity of powder detergent into the empty drum, in order to rinse out any left residues.
Occasionally, at the end of a cycle the display may show
the icon : this is a recommendation to perform the “drum cleaning”. Once the drum cleaning has been performed, the icon disappears.
17.8 Cleaning the detergent dispenser
To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a while carry out the following cleaning procedure:
1. Open the drawer. Press the catch downwards as indicated in the picture and pull it out.

1
2
2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent. After cleaning, put the top part back into position.
3. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess.
4. Insert the detergent drawer into the guide rails and close it. Run the rinsing programme without any clothes in the drum.

ENGLISH 41

17.9 Cleaning the drain pump
WARNING! Disconnect the mains plug from the mains socket.
Regularly check the drain pump filter and make sure that it is clean.
Clean the drain pump if: · The appliance does not drain the
water. · The drum does not turn. · The appliance makes an unusual
noise because of the blockage of the drain pump. · The display shows the alarm code
.
WARNING! · Do not remove the filter
while the appliance operates. · Do not clean the pump if the water in the appliance is hot. Wait until the water cools down
Proceed as follows to clean the pump:
1. Open the pump cover.

2 1 2. Place a suitable bowl below the drain pump access to collect the water that flows out. 3. Open the chute downwards. Always keep a rag nearby to dry up any water spillages when removing the filter.
4. Turn the filter 180 degrees in anticlockwise direction to open it, without removing. Let the water flow out.

5. When the bowl is full of water, turn the filter back and empty the container.
6. Repeat the steps 4 and 5 until the water stops to flow out.

42 www.electrolux.com

7. Turn the filter anti-clockwise to remove it.

2

1
1 2

12. Close the pump cover.
8. If it is necessary, remove fluff and objects from the filter recess.
9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 2

10. Clean the filter under the water tap.

1
When you drain the water with the emergency drain procedure, you must activate the drain system again:
a. Put 2 litres of water in the main wash compartment of the detergent dispenser.
b. Start the programme to drain the water.
17.10 Cleaning the inlet hose and the valve filter

1. 1

11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.

2 3

3. 4. 45°
   20°

ENGLISH 43
in ‘Cleaning the drain pump’ paragraph. If necessary, clean the pump.
When you drain the water with the emergency drain procedure, you must activate the drain system again:
1. Put 2 litres of water in the main wash compartment of the detergent dispenser.
2. Start the programme to drain the water.
17.12 Frost precautions
If the appliance is installed in an area where the temperature can reach values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump.
1. Disconnect the mains plug from the mains socket.
2. Close the water tap. 3. Put the two ends of the inlet hose in
a container and let the water flow out of the hose. 4. Empty the drain pump. Refer to the emergency drain procedure. 5. When the drain pump is empty, install the inlet hose again.
WARNING! Make sure that the temperature is higher than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures.

17.11 Emergency drain
If the appliance cannot drain the water, carry out the same procedure, described
18. TROUBLESHOOTING
WARNING! Refer to Safety chapters.

44 www.electrolux.com
18.1 Alarm Codes and Possible failures
The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables).
WARNING! Deactivate the appliance before carrying out any check.
With some problems, the display shows an alarm code and the Start Pause button may flash continuously:
If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start Pause button until the indicator
stops flashing (see the picture below).

Problem The appliance does not fill with water properly.
The appliance does not drain the water.

Possible solution
· Make sure that the water tap is open. · Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority. · Make sure that the water tap is not clogged. · Make sure that the inlet hose has no kinks, damages or
bends. · Make sure that the connection of the water inlet hose is
correct. · Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to ‘Care and cleaning’.
· Make sure that the sink spigot is not clogged. · Make sure that the drain hose has no kinks or bends. · Make sure that the drain filter is not clogged. Clean the fil-
ter, if necessary. Refer to “Care and cleaning”. · Make sure that the connection of the drain hose is correct. · Set the drain programme if you set a programme without
drain phase. · Set the drain programme if you set an option which ends
with water in the tub.

ENGLISH 45

· Make sure that the door is properly closed.
The appliance door is open or not closed correctly.

· The programme was not finished properly or the appliance

Internal fail. No com- munication between electronic elements

·

stopped too early. Switch the appliance off and on again. If the alarm code appears again, contact the Authorised Service Centre.

of the appliance.

The mains supply is unstable.

· Wait until mains supply is stable.

If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the appliance check the table below for possible solutions.

Problem

Possible solution

·

·

·

The programme does ·

not start.

·

· ·

Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that there is no damaged fuse in the fuse box.
Make sure that the Start Pause has been touched. If the delay start is set, cancel the setting or wait for the end of countdown. Deactivate the Child Lock function if it is on. Check the position of the knob on the selected pro- gramme.

The appliance fills · Make sure that the drain hose is in the correct position.

with water and drains The hose may be positioned too low. Refer to “Installation

immediately.

instruction”.

· Set the spin programme.

The spin phase does · Make sure that the drain filter is not clogged. Clean the fil-

not operate or the

ter, if necessary. Refer to “Care and cleaning”.

washing cycle lasts · Adjust manually the items in the tub and start the spin

longer than usual.

phase again. This problem may be caused by balance

problems.

· Make sure that the couplings of the water hoses are tight

and there is not water leakages.

There is water on the · Make sure that the water inlet hose and the drain hose

floor.

have no damages.

· Make sure you use the correct detergent and the correct

quantity of it.

46 www.electrolux.com

Problem

Possible solution

· Make sure that a washing programme that ends with water

in tub, has not been selected.

· Make sure that the washing programme is finished.

· Set the drain or the spin programme if there is water in the

You cannot open the drum.

appliance door.

· Make sure that the appliance receives electrical power.

· This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre.

If you need to open the door, please read carefully “Emer-

gency door opening”.

· The appliance makes an unusual noise and · vibrates.
·

Make sure the levelling of the appliance is correct. Refer to “Installation instruction”. Make sure that the packaging and/or the transit bolts are removed. Refer to “Installation instruction”. Add more laundry in the drum. The load may be too small.

The programme du- ration increases or decreases during programme execu- tion.

· The SensiCare System is able to adjust the programme duration according to the type and the laundry load size. Refer to “The SensiCare System load detection” in “Daily Use” chapter.

The washing results are not satisfactory.

· Increase the detergent quantity or use a different deter- gent.
· Use special products to remove the stubborn stains before you wash the laundry.
· Make sure that you set the correct temperature. · Decrease the laundry load.

Too much foam in the drum during the washing cycle.

· Reduce the quantity of detergent or the number of tablets or single-dose detergents.

After the washing cy- · cle, there are some detergent residues in · the dispenser drawer.

Make sure that the flap is in the correct position (UP for powder detergent – DOWN for liquid detergent). Make sure you have used the detergent dispenser accord- ing the indications given in this user manual.

The appliance does not dry or does not dry correctly.

· Turn the water tap on. · Make sure the drain filter is not clogged. · Reduce the laundry load. · Make sure you have set the correct cycle. if necessary, set
again a short drying time.

The laundry is full of different colours fluff.

The fabrics washed in the previous cycle released fluff of a different colour: · The drying phase helps to eliminate some fluff. · Clean the clothes with a fluff remover. In case of an excessive amount of fluff in the drum refer to “Fluff in the fabrics” paragraph for more details.

ENGLISH 47

After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate.

18.2 Emergency door opening
In case of power failure or functioning failure the appliance door remains locked. The washing programme continues when the power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock function.
Before opening the door:
CAUTION! Risk of burns! Make sure that the water temperature is not too high and the laundry is not hot. If necessary, wait until they cool down.

To open the door, proceed as follows:
1. Press the On/Off button to switch the appliance off.
2. Disconnect the mains plug from the mains socket.
3. Open the filter flap. 4. Pull the emergency unlock trigger
downward once. Pull it downward once again, keep it tensed and, in the meanwhile, open the appliance door.

CAUTION! Risk of injury! Make sure that the drum is not rotating. If necessary, wait until the drum stops rotating. Make sure that the water level inside the drum is not too high. If necessary, proceed with an emergency drain (refer to «Emergency drain» in «Care and cleaning» chapter).

5. Take out the laundry and then close the appliance door.
6. Close the filter flap.

19. CONSUMPTION VALUES

19.1 Introduction

See the web link www.theenergylabel.eu for detailed information about Energy Label.

48 www.electrolux.com

The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance. It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance. Refer to ‘Product description’ chapter for the position of the rating plate.
19.2 Legend

kg
kWh Litres %

Laundry load.

hh:m Programme duration. m

Energy consumption.

°C

Temperature in the laundry.

Water consumption.

rpm Spin speed.

Remaining moisture at the end of the cycle. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture at the end of washing cycle.

Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme.

19.3 According to Commission Regulation Eu 2019/2023

Washing only

Eco 40-60 pro- gramme

kg

Full load

8.0

Half load

4.0

Quarter load

2.0

1. Maximum spin speed.

kWh Litres hh:mm %

°C

rpm1)

0.720 57.0 0.539 42.0 0.150 27.0

3:30 52.00 37.0 1600 2:45 52.00 36.0 1600 2:45 54.00 24.0 1600

Wash and dry cycle

Eco 40-60 pro- gramme and Cupboard dry level

kg

kWh Litres hh:mm %

Full load

5.0 3.255 76.0 5:55 0.00

Half load

2.5 2.175 42.0 4:20 0.00

1. Maximum spin speed.

Power consumption in different modes

Off (W)

Stand-by (W)

0.50

0.50

Time to Off/Standby mode is 15 minutes maximum.

19.4 Common programmes Washing only

ENGLISH 49

°C

rpm1)

35.0 1600 32.0 1600

Delay start (W) 4.00

These values are indicative only.

Programme

kg

kWh Litres hh:mm %

°C

Cotton 2) 90°C

8.0 2.750 100.0 3:30 44.00 85.0

Cotton 60°C

8.0 1.950 95.0 3:10 44.00 44.0

Cotton 3) 20°C

8.0 0.360 95.0 3:00 44.00 20.0

Synthetics 40°C

3.0 0.600 60.0 2:10 35.00 40.0

Delicate 4) 30°C

2.0 0.350 55.0 1:10 35.00 30.0

Wool 30°C

1.5 0.400 50.0 1:10 30.00 30.0

1. Maximum spin speed. 2) Suitable for washing heavily soiled textiles. 3) Suitable for washing lightly soiled cottons, synthetic and mixed fabrics. 4) It also performs as quick washing cycle for lightly soiled laundry.

rpm1) 1600 1600 1600 1200 1200 1200

50 www.electrolux.com
19.5 Common programmes Wash and dry
These values are indicative only.

Programme

kg

kWh Litres hh:mm %

Synthetics 40°C

3.0

1. Maximum spin speed.

1.800 70.0

3:25

1.00

ENVIRONMENTAL CONCERNS

°C

rpm1)

40.0 1200

Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of

appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.

157072340-A-092023

www.electrolux.com/shop

References

• Buy Electrolux Spare Parts | Electrolux Australia
• Electrolux
• Register Your Appliance – Product Registration – Electrolux

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>