Smart Life KS-7012F Wi-Fi Style Smart Wall Dimmer Switch User Manual

Smart Life KS-7012F Wi-Fi Style Smart Wall Dimmer Switch

Notes Before Installation

1. Wi-Fi Only support a 2.4GHz network (802.11 b/g/n)
2. Neutral wire Required.
3. Basic electrical wiring knowledge or experience required, or please consult a professional electrician.
4. ON/OFF Button also can be used as reset button, long press to reset your  dimmer switch to factory defaults. Only do this if you are sure you want to erase all your settings.

Product Description

100% support
LED| 3-150W MAX(The total power of multiple LED bulbs is up to 150W)| The packaging and lights say “dimmable” “Diamond Spark” “warm dimming” or other
CFL| | not support

Install the “Smart Life”APP Step

A : Find out “Smart Life”app in Apple app store, Google Play, or scan the QR code bellow and install it. The free app”Smart Life”is compatible with mobile devices the support IOS8.0 above, Android 4.4 above Step

B : Enter the register interface, input the email address/phone number for getting the verification code to register an account. Please just login if you already have a Smart Life account.

|

Singe Pole Dimmer Installation Guide

When the light is turned off, use a test pen to detect that the live one is LIVE, the uncharged one is LOAD , the white wire is ,   and the copper wire or green one is GROUND. You can label them individually with tags

PS:Singe Pole Dimmer Installation
Only suitable for single pole normal switch/dimmer switch
Replacing with a Smart Single Pole Dimmer Switch

3 Way Dimmer Installation Guide

Before installing, you need to distinguish between Box A and Box B. When you want to replace Box A and Box B at the same time or only replace Box B, the installation method is different

How to distinguish between Box A and Box B

Test the L wires of two ordinary switches with the lights off, the L wire with power is Box A, and the one without power is Box B

• The L on the old switch is Live.

• The T of the old switch is Travelet

• The white one is Neutral.

• Green or bare copper wire is Ground
  

• The L on the old switch is Live.

• The T of the old switch is Travelet

• The white one is Neutral.

• Green or bare copper wire is Ground

• Live Wire has energy (not Travelet)
  

1. 3 Way Dimmer Installation Guide(2 pack)
   

2. 3 Way Dimmer Dimmer Installation Guide(1 pack)
   This installation method is only suitable for replacing one switch of Box B.
   Box A does not need to be replaced with 7012F YL/RD can be connected with any Traveler.
   

Connect “Smart Life” APP

1. Connect your phone to 2.4GHz Wi-Fi.
2. Put the switch into pairing state: long press the pairing button until the light flashes.
   
   The flashing state of the light is divided into fast flashing and slow flashing.
   The manual only introduces the pairing method of fast flashing.
   Booting defaults to fast flashing mode
   Fast flashing: 3 flashes per second
   Slow flashing: 1 blink per second.
   The switching method of fast flashing and slow flashing: long
   press the pairing button, and don’t let go until the indicator

The name of the custom switch

Confirm device information custom switch

Virtual ID:
Product system code, used for after-sales. If you encounter problems in use, please copy and send it to us.

Signal Strength:
A larger value indicates a stronger signal. A value less than -68dBm indicates that the signal is very poor, and the connection may be disconnected at any time. It is recommend

Timing on/off lights custom switch

You can choose a fixed time point to perform the action, so that the lights can be turned on on time even if you are not at home. (The timing action is only executed once, and the light can only be turned on or off once. Therefore, after the timing of turning on the light is set, an additional time for turning off the light should be set.)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>