Haojin P47 Wireless Headphones Instructions

Haojin P47 Wireless Headphones Instructions

Product Information

Specifications

• Model: [Product Model]
• Dimensions: [Product Dimensions]
• Weight: [Product Weight]
• Power Source: [Power Source]
• Connectivity: [Connectivity Options]
• Battery Life: [Battery Life]

KeyOperating Instructions

1. Long press three seconds is power on.off
2. DIn Wireless mode when get the calling. Short Press is answer the calls;Long Press is Refuse to listen. соонІ continuous push 2 times is redial
3. Short Press;Play/Pause;
4. The next song/The volume-
5. The last song/The volume+
6. Short Press to change the model, Wireless/MP3/FM Radio

LED Indicator

1. Wireless mode:palring status blue light flashing, after pairing the blue light slow flashing.
2. In MP3 mode:the blue light will slow flashing when playing;
3. In FM mode: When listening to the radio station blue light. search radio flashing.
4. In charging mode:the red light is on steadily when charging, when it’s fully charged. the red light will be off.

LINE Connecting TO Audio Jack

1. Insert audio line, Go directly to the AUX LINE IN pattern, at this time for ordinary headset headphones, buttons
2. Support mobile phone/MP4/MP3/CD/PC,etc

Functional Parameter

1. USB charge: DC5VIN
2. FM frequency: 87.5-108MHz
3. Frequency:50HZ-20KHz
4. Wireless frequency:2.402-2.480GHz
5. Call duration: 6hours
6. SNR:88Db
7. Wireless distance: 10meters
8. Output power: 1.61mW
9. Charging time: 2hours
10. Standby time: 15hours

Product Usage Instructions

Power On/Off

To power on the device, press and hold the power button for a few seconds until the indicator light turns on. To power off the device, press and hold the power button again until the indicator light turns off.

Playing Music

To play music, follow these steps:

1. Make sure the device is powered on.
2. Connect your device to the product using the provided cable or via wireless connectivity.
3. Press the play button to start playing music.
4. Use the volume buttons to adjust the volume level.

Changing Songs and Volume

To change songs and adjust the volume, use the following buttons:

• The next song button: Press this button to skip to the next song in the playlist.
• The last song button: Press this button to go back to the previous song in the playlist.
• The volume+ button: Press this button to increase the volume.
• The volume- button: Press this button to decrease the volume.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the protecion against hatur erience in a reside rial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• herest the seatation been the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. equiremen. This equipment mies in FoR radiaion exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.

Frequently Asked Questions

Q: How do I charge the device?
A: To charge the device, connect it to a power source using the provided charging cable. The indicator light will turn on to indicate that it is charging. Once fully charged, the indicator light will turn off.

Q: How do I pair the device with my smartphone?
A: To pair the device with your smartphone, make sure both devices have Bluetooth enabled. Then, search for available Bluetooth devices on your smartphone and select the device name that corresponds to your product. Follow any additional prompts to complete the pairing process.

Q: How do I reset the device?
A: To reset the device, locate the reset button (usually a small hole) on the product. Insert a small pin or paperclip into the hole and press and hold for a few seconds until the device resets and powers off. Release the reset button and power on the device again.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>