Shenzhen Haojin Electronics S9 Vertical Mouse User Manual
- June 6, 2024
- Shenzhen Haojin Electronics
Table of Contents
Shenzhen Haojin Electronics S9 Vertical Mouse
Connecting USB Receiver
Take out the receiver from the package box and insert USB receiver into the
USB port on your computer. For the first time use, please toggle the power
switch(on the bottom of the mouse) to the “ON’ position, the mouse and USB
receiver will automatically connect.
Intelligent sleep and wake up
The mouse has automatic wake up and sleep function. If it not use for a while,
the mouse will automatically enter a dormant status, you can press any button
on the mouse to wake up the mouse. The mouse lights will continue to flash and
keep working with the receiver.
Turning off the mouse
When the mouse does not need to be used, toggle the power switch to the ‘OFF’
position. You can leave the USB receiver in computer or put it back into the
slot under the mouse for safe keeping.
Rechargeable batteries (using 5 c)
It uses 5C rechargeable lithium battery. Please use the original charging
line(provided by original factory). The product can be used while charging,
but will extend the charging time. When battery is low, it will power off
automatically to avoid the danger of excessive discharge. Charge indicator:
light bright for charging status, lamp light will stay on. If it is flashing,
there may be poor contact, please check the connection. It need 3-4 hours for
a full charge and will last 30 to 60 days. It can be recharged 300 times.When
charging, charging port LED shine blue; Full charge. LED turn off.
Notes: This product has 3 configurations, A .B.C for your choice.
Configure A: lithium battery version, this version has a built in
rechargeable lithium battery, with an additional USB charging cable.
Configure B: AAA battery wireless models, loaded with 2 AAA batteries,
shipping do not including 2pcs AAA battery
Configuration C: wired models, a USB cable to connect the equipment power
supply.
Appendix Technical parameters Specification
- Measurements (LWH):105 x 73 x 60(mm)
- Weight (grams): B0.5g(bare computer)
- Operational range: > 1 Om
- Transmit power: +5db max
- Operation voltage: 3. 7v
- Operation current: < 1 0mA
- Charging current: <300mA
- Sleep current: < 1 uA
- Sensitivity: wired:3200-2400-1600-1 000dpi fourth gear cycle
- Ii-ion battery: 800-1200-1600dpi
- dry battery: 800-1200-1600dpi
Computer system requirements:
- Windows 2000
- WindowsXP
- Windows Vista, Windows CE, Windows 7, Windows10 Linux Android7
Maintenance
- Do not attempt to remove the device or replace lithium battery , or it will make the warranty be invalid and may cause it to short circuit; fire and explosion danger.
- The battery will discharge if do not use for a long time.
- Use the specified charger. Disconnect the device after the battery has been fully charged. Overcharging the battery will shorten the life of the battery.
- Use only a damp cloth with mild soap to clean the device. Solvents and other cleaning agents may cause damage to the device.
- Don’t expose device to very hot or very cold environment. Extreme temperature can make electricity shorten the mouse life.
Troubleshooting
Following are some basic troubleshooting scenarios for the device. Please contact support from the place of purchase if you’ re unable to resolve any issues with the device.
Malfunction | The possible reasons | The solution |
---|---|---|
The mouse no respond | 1 , The battery is low |
2, Power switch is turned off
3, The device is installing the
driver
| 1,Solution A: charge for at
least 15 minutes
Solution B: if using for the first time propose a full
charge before use 2,Check if the switch has been turn to ‘ON” position 3, Check the light on the
buttom of mouse if is bright
unable to conn- ect to the USB receiver| 1,The receiver not
inserted correctly 2,Low battery shut-
down automatically
| 1,Pull out the receiver
and re-insert into USB port 2,Use the mouse on a full
charge again
the mouse pain- ter is irregular or slow to respond| 1,Equipment may not be the optimal receiving range
2,Low voltage 3,Dust and oil on the
laser at the bottom 4,The mouse DP I is
too low
| 1,Move mouse closer to the receiver
2,Please charge or change batteries
3,Use wet cloth clean the bottom of the laser
4,change the DP I by press left key and middle wheel
together
Product can not charge| 1,Low battery 2,Poor connection 3,Charging line
damaged| 1,Please contact the local dealer to replace
2,Check whether the product is connected to the charger safely.
3. Reolace the new charaina line
A. lithium batter version
B. AAA battery version
C .The cable design
OPTICAL VERTICAL MOUSE
Healthy Mouse HOMOO S9
This mouse is full of vitality, innovation, and has many healthy benefits. By
changing the way you use your wrist and arms, you will effectively reduce pain
and discomfort. Add rubber oil coating to prevent sweaty fingers from sliding.
From the office to gaming, using the optical vertical mouse is comfortable and
healthy.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>