nVent RBW34654 LENTON Crucible Chain Assembly Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent RBW34654 LENTON Crucible Chain Assembly
Product Information
Specifications
| Katalognummer | Length (L) | Width (W) | Unit Weight |
|---|---|---|---|
| RBW34654 | 140 mm | 152 mm | 1.630 kg |
| RBW34676 | 140 mm | 178 mm | 1.680 kg |
Features
- Spiral handle helps insulate operator from the heat of the crucible
- Durable, re-usable, and long-lasting
- Adjustable to fit multiple combinations of crucibles, sleeve, and reinforcing steel combinations
Additional Product Details
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
Diagrams
No diagrams provided in the user manual.
Contact Information
If you have any questions or need assistance, please contact our customer support:
- Europa Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europa Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Disclaimer
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
All trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparing for Installation
- Ensure you have read and understood the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
- Gather all necessary tools and equipment for the installation.
Step 2: Attaching the Crucible Chain Assembly
- Identify the crucible and the crucible chain assembly.
- Position the crucible chain assembly around the crucible.
- Adjust the chain length to fit securely around the crucible, sleeve, and reinforcing steel combinations.
- Ensure the spiral handle is facing outward for operator insulation.
- Tighten any adjustable components to secure the crucible chain assembly in place.
Step 3: Ensuring Stability
- Verify that the crucible chain assembly is securely attached to the crucible.
- Check that the chain length is appropriate and does not cause instability.
Step 4: Exothermic Reaction
- Proceed with the exothermic reaction according to the specific instructions for the desired process.
- Monitor the crucible chain assembly during the reaction to ensure stability.
Step 5: Post-Reaction
- After the exothermic reaction is complete, allow the crucible to cool down.
- Carefully remove the crucible chain assembly from the crucible.
- Inspect the crucible chain assembly for any signs of damage or wear.
- If necessary, clean and store the crucible chain assembly for future use.
Frequently Asked Questions (FAQ)
Q: Can the crucible chain assembly be used with any size of crucible?
A: Yes, the crucible chain assembly is adjustable to fit multiple combinations of crucibles, sleeve, and reinforcing steel combinations.
Q: Is the crucible chain assembly reusable?
A: Yes, the crucible chain assembly is durable, re-usable, and long-lasting.
Introduction
The crucible chain assembly attaches to the crucible and helps ensure the crucible is stable during the exothermic reaction.
FEATURES
- The spiral handle helps insulate operator from the heat of the crucible
- Durable, re-usable and long-lasting
- Adjustable to fit multiple combinations of crucibles, sleeve and reinforcing steel combinations
SPECIFICATIONS
| Katalognummer | Length(L) | Width(W) | Unit Weight |
|---|---|---|---|
| RBW34654 | 140 mm | 152 | |
| mm | 1.630 kg | ||
| RBW34676 | 140 mm | 178 | |
| mm | 1.680 kg |
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.
DIAGRAMS
WARNING
nVent products must be able to be installed and used as indicated in nVent’s product instruction sheet and training material. Instruction sheets are available at www.nvent.com and from nVent customer service representatives. Failed installation, misuse, fail Bruk eller annen unnlatelse av å fölge nVents instructions and warnings in their entirety can cause product failure, damage to property, serious personal injury and death and/or void the warranty.
Nord-Amerika
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europa
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europa
- Germany :
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>